The reviews are automatic translation.
On 2017-05-15 00:53:25
Although I have not used it yet, I bought it thought that it is not regret even if it is cheap because it is cheap.
On 2016-08-25 09:51:15
Although it can be used without problems, the cutting edge slightly blurs.
During drilling work
On 2016-08-04 09:52:21
I bought it to use 10 φ drill. Impact It is used with an electric drill, but since it tightly fastens at the time of forward rotation, the attached handle has been bent when removing the drill, and it needs to be tightened many times because it loosens at the time of reverse rotation. Is not it impact-oriented?
Iron plate 3 mm to 9 mm to use with ironworking mill.
On 2016-07-18 19:14:00
Iron plate 3 mm to 9 mm in use with ironwork drill, from 8 mm to 10 mm drilling, there are times when the axis breaks.
For woodworking work
On 2016-06-22 16:53:49
It is handy because it can use ordinary drill blades which are not hexagonal.
On 2016-04-29 20:11:39
Used to increase the size of the 10 mm Chuck rechargeable drill. There is little shake, strength is also provided, the price is cheap, I am satisfied.
Correction of bolt hole during outboard motor, conversion
On 2016-03-29 11:50:06
It is very convenient when you want to use a large diameter drill a bit for electric drill of 10 mm chuck.
As a drill chuck
On 2016-02-02 11:59:57
It is often broken but I always bought it. It will be great if the price goes down.
On 2015-12-27 20:45:22
This is the worst, axis breve. If it is turning, the drill falls freely by hand. It was a failure. A different thing before was red one better.
Used attached to the impact driver
On 2015-11-11 20:55:57
Because it is attached to the impact driver, it got stuck while the drill blade was in use and it did not loosen when changing the drill. It is easier for the chuck turning to be slightly larger as it enters the force and loosens it.