The reviews are automatic translation.
Component mounting in the control panel
On 2016-12-03 23:13:57
The pursuit of cheap, since the surface treatment was bad at the lack of strength, was reused as resources.
Mounting of electrical equipment
On 2016-11-19 21:50:54
Even if the lock mounting the electrical equipment there is a backlash. For example, in the rail such as IDEC Gatanashi.
Also because there is cheap price, it is cheap and nasty.
Assembly of the control panel
On 2016-09-13 16:08:35
You can use at all
This may be cheap, but it is hard to peel off the seal of the product
Is Hoshi put from the top of the vinyl
Relay sockets, mounting such as PLC, control panel assembly
On 2016-08-21 13:45:30
But it was fitted with a OMRON relay sockets, works can not be completely fixed.
Texture is also not good in the rough. Towards the end of the rail back it is pasted written a bar code seal, but not be able to peel off cleanly.
Electrical component mounting
On 2016-08-16 07:41:53
Cheap, you can use ordinary. I think that you want to use in the future.
Equipment fixed in the control panel
On 2016-08-10 09:23:27
Not enough to the dimensions of the unfortunately 35 mm, is the extent -0.15 but is it big, you move around and do not use a fixed bracket for terminal board.
It is far from the 1.3 there to be 0.95 and Figure the thickness of the ribs
So in some cases good in other people review but, if the variation is too large, it can not be used
It has re-ordered the Kasuga of things.
Mounting of the control device
On 2016-08-04 05:14:43
It was very easy to use at low cost. Packaging is also beautiful and satisfaction
On 2016-07-29 17:58:02
In initial use is no problem.
Durability in long-term use is unknown.
Control panel assembly
On 2016-02-08 14:43:26
It was mounting relay sockets, etc., but will move there is a backlash even after mounting difficult to fit.
Mounting of parts, etc.
On 2015-10-07 11:22:28
Since the mounting pitch is different from the one that has been conventionally used, it is either fit well.