* Products that meet your criteria are shown in table below.
- Cutting Edge Angle (degree)
- Cutting Capacity (phi mm) Copper Wire
- Cutting Capacity (phi mm) Steel Wire
- And (smoothing iron wire) 1.5 wire
- Dimensions C (mm)
- Material (Grip)
- Dimensions B (mm)
- Dimensions E (mm)
- Dimensions D (mm)
- Dimension F (mm)
- Cutting Capacity
- 2.0mm 2 SUP> plastic Allowed: line more
- Dimensions A (mm)
- HRC52 - 57 (blade part)
- Nominal Dimension (mm)
- Weight (g)
- Overall Length (mm)
- Stainless steel
- TRUSCO Part Number
Customers Who Viewed This Item Also Viewed
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
3 Customer Reviews
The reviews are automatic translation.
The best is to go off the jumper and intricate lead lines on the substrate
On 2017-04-08 01:48:15
The disadvantage is, that grip is coming missing. In use, such as pull out quickly from the scissor case will come shifted immediately.
Blade at the same hardness and plastic, but is different from the thickness and the angle of the blade. Not a blade to very long-lasting. It was bought repeat in one and a half years.
And pull out the return spring of plastic, so open wide as scissors, old ones re-sharpening, we use also became so sharpening of taste.
Lightweight and sharp cutting edge and stainless steel. Blade is hard Although there is no easy fix sharpening. made in Japan.
Left is the front by hand side has the same build Nanoha as the left-handed scissors, but will good either because it is not a blade to shear unusual. I think that it is quite a lot of features tool.
Cut the narrow place
On 2014-11-20 14:22:25
I intended to pick the longest cutting edge, but I was worried when I bought it because there was no detail.
Cutting of cappi, peeling
On 2011-08-23 19:35:08
The tip is thin and sharp. It is easy to use.