The reviews are automatic translation.
1100 sword mirror height adjustment of
On 2016-04-13 16:06:30
Because of the separate handle, and wear the rearview mirror of the market goods, it took advantage of the perspective adjustment of rearview mirror becomes to be lower, because I did not get used.
The degree of plating is also well satisfied
On 2015-07-14 10:56:28
But heavy in iron, so I make are firm, level the vibration of the mirror is not the most care.
Also in the difference about only 2 centimeters, reflection of the mirror it is quite changed.
Mirror mounting of Yamaha bikes.
On 2014-08-20 17:31:46
While the left was also thinking of to align with a spacer to match the height of the reverse screw,
Since the reverse screw is also a set of two So it was not required to ....
Mounting of the mirror
On 2014-06-30 07:51:08
Since the various co-tightening, such as stay and shield to the mirror portion,
I purchased and want things threaded portion is long, but this was common.
But you normally use as an ordinary mirror adapter.
Height adjustment of the bike mirror
On 2013-05-13 19:16:14
Rearview was purchased can not be adjusted If you do not use the Spencer. Rearward visibility is also good mirror and match to.
Style up from the front
On 2013-03-19 20:44:36
Scratch of the tool, a very good state of the paint without the occurrence bald. Of course, accuracy (rattling, etc.) is also ... no problem.
Adjusting the position of the rearview mirror of bike
On 2011-07-02 02:33:17
I bought along with the short likely blade stays mirror of the stay.
Look and paint even without cheesy mirror is also happy to match.
Visibility was also better amount that was raised a little.