* Products that meet your criteria are shown in
- For check of disconnection of cords and wiring, For check of disconnection of cords and wiring
- Overload Protection
- (And that the spacing of more than a minute return) about 30 seconds MAX230V DC / AC
- Buzzer and lamp (conduction lamp lights up in less than 60ohm, the buzzer is sounding)
- Dimensions (Height H x Width W x Depth D) (mm)
- 1.5V R03 battery three
- Weight (g)
- (Including battery) about 135
- (1.5V R03) 3 lines Built-in battery
Customers Who Viewed This Item Also Viewed
| 5 star
| 4 star
| 3 star
| 2 star
| 1 star
6 Customer Reviews
The reviews are automatic translation.
On 2016-05-16 08:37:04
When you take out from the storage part you want to use the switch is on and the battery is exhausted There are several times to replace the battery Switch not to be deeper more Can you also soften the code Can not make the volume bigger I am dissatisfied with the factory etc. Even so as to short-circuit the lead rod before use and turn on the power (price problems will also be high and will be high.)
On 2015-03-10 13:48:45
Too big. I do not need an LED light. The buzzer sound of the bottom is small. I am using three AAA and it is heavy. The storage of the code can not be completed. It is perfectly unsuitable for people who want to check the wiring by themselves at the electric shop or who wants to use the site. For tabletop use? ¥ 2.000 Close amount + With the optional alligator clip it will be about 2.500, but it has become garbage.
Check connector wiring
On 2014-11-19 13:30:15
It did not react unless it pressed against the conductor part considerably strongly. I feel like I can not use it like a work with three hands.
Telephone wiring, continuity test
On 2014-04-04 16:07:41
Easy to use
Inspection of firefighting equipment
On 2013-11-17 14:14:01
Since the power switch was turned on from the time it arrived, the battery has already been exhausted and it could not be used.
For connection inspection of the operation panel wiring
On 2013-11-01 15:22:23
The product is compact and very good, but the main body is too light and it is not stable so it is hard to use. Since the sound of the buzzer is small, if the volume is available, it can be made to the volume suitable for the usage environment. I think that the cover attached to the tip of the inspection rod is unnecessary. It is better to have a light, but it is not a practical brightness. The cable is easier to use than a soft material. From the above thing, if you increase the capacity of the battery and store it in the main body, the weight gains stability feeling comes out and at the same time I think that it can be used without decreasing the usage time even if the volume and the light quantity are increased.
Customers Who Bought This Item Also Bought