|
|
Solid-State Timer H3Y-2, DC Power Source H3Y-2 DC12 3M
(4)
- Item.#
- 02089132
- Mfr.#
- H3Y-2 DC12 3M
- Package Qty.
- 1PC
- Ship pack of
- 1
Item Feature
- Caution
- This product is manufactured in Japanese standards. Please check the specification before you order.
- Weight (g)
- About 50
- Opreration Method
- Operations with time limit
- Maximum Time Scale
- 3min
- Time Limit Contact
- 2c
- Terminal Shape
- Plug-in (surface mounting) 8-pin
- Operating Temperature Range (deg C)
- IP40
- Operating Mode
- Power-on delay
- Recovery Time
- 0.1s or less (including in-process reset)
- Power Consumption
- Before time-up : about 0.1W
After time-up : about 1.1W (at DC12V)
- Allowable Voltage Range(V)
- 90 to 110% of power supply voltage
For continuous use at 50degreeC, use at 95 to 110% of the supply voltage
- Impact Resistance
- 1000 m/s2 6 directions, 3 times each
- Vibration Resistance
- 10 to 55Hz, single amplitude 0.75mm, 3 directions, 1h each
- Voltage Influence
- less than +/-2% (during full-scale)
- Operating Ambient Temperature (deg C)
- -10 to +50 (however, no freezing)
- Control Output
- AC250V 5A resistance load (cosphi=1)
Minimum applied load DC5V 1mA (P standard and reference values)
- Protection Structure
- -10 to +55 (however, no freezing)
- Storage Temperature (DegreeC)
- -25 to 65 (however, no freezing)
- Noise Immunity
- Square wave noise simulator (pulse width of 100 ns/1micros rise 1ns)+/-1.5 kV
- External Dimensions (Width (W)x Depth (D)x Height (H)) (mm)
- Below 21.5 below x63x28
- Ambient Humidity
- 35 - 85%
- Electrostatic Yield Strength
- 4 kV (malfunction), 8 kV (breakage)
- Time Specification
- 0.1min - 3min
- Release Voltage
- 10 or more% of the supply voltage
- Reset Method
- Self recovery
- Power Supply Voltage (V)
- DC12
- Form
- H3Y-2
- Set Error
- less than +/-10%+/-50ms (during full-scale)
- Impact Resistance (Malfunction)
- 100 m/s2 6 directions, 3 times each
- Vibration Resistance (malfunction)
- 10 to 55Hz, single amplitude 0.5mm, 3 directions, 3 times each
- Withstand Voltage
- Between conductive terminals and exposed non-charged metal parts (excluding terminal screws): AC2000V 50/60Hz 1min
Between operation power supply circuit and system control output: AC2000V 50/60Hz 1min
Between unlike pole contacts: AC2000V 50/60Hz 1min
Between non-continuous points of contact: AC1000V 50/60Hz 1min
- Impulse Voltage(V)
- Power terminal spacing: 1k
Between conductive terminal and exposed non-charging metal spacing: 1.5k
- Operating Time Variation
- less than +/-1% (during full-scale)
- Insulation Resistance (Mohm)
- 100 or more (measured with DC500V mega)
- Electrical Life
- 10 or more,000,000 times (no load, opening/closing frequency 1800 times per hour)
- Effect of Temperature
- less than +/-2% (during full-scale)
- Electrical Service Life (rated load)
- More than 500,000 times (AC250V 5A resistance load switching frequency 1800 times/h) (at room temperature)
|
Customers Who Viewed This Item Also Viewed
Customer Reviews
| 5 star
| |
4 |
| 4 star
| |
0 |
| 3 star
| |
0 |
| 2 star
| |
0 |
| 1 star
| |
0 |
Review Rating:
4 Customer Reviews
The reviews are automatic translation.
The LED stop lamp blinks for the timer setting time and then switches to lighting
From Japan
On 2016-05-04 20:17:19
I am satisfied with the amount, quality. Occupation is "maintenance of equipment" Omron products are treated and easy to use.
Work machine pump timer
From Japan
On 2015-06-29 19:16:57
It is compact. Easy to set up, saved.
Sequence change of power supply equipment
From Japan
On 2013-12-22 18:04:35
· · · · It was ordinary Omron product! Of course the operation is perfect! It is!
Used for 12 volt battery power control
From Japan
On 2013-11-06 22:42:26
I am satisfied with the product, but I am struggling to install it because detailed instructions are not attached. Next time I purchase I also want to have instructions.
Customers Who Bought This Item Also Bought
