The reviews are automatic translation.
On 2018-03-13 11:26:20
Although there are no problems with the product, it is still not packed, so it was rolling in the box. Excess packing is unnecessary, but I just want to ask you not to damage the product.
JB23 Used for transfer mount
On 2018-02-20 14:41:37
Others also wrote in the review, but since the front propeller shaft interferes with the frame pipe when raising the car height at Jimny, it was used to raise the transfer by 10 mm from original. I cut the bolt short, but it might be better to shorter from the beginning.
Maintenance of own vehicle
On 2018-01-22 14:40:43
I used it for transfer mount of JB23.
It was good because the price was cheap and the spring washer was also attached.
On 2018-01-18 18:14:13
Although the goods are good without problems, I was worried that the goods purchased together because the roll was rolling in the box whether I forgot the packing.
On 2017-10-18 16:32:34
Although there are comparable items in the monotair, there is a drawback that the threaded portion is prone to rust, we use it here.
Because it is not necessary for a large amount, although it is expensive, it is selling roses so I am saved.
Vibration isolation of air conditioner outdoor unit.
On 2017-05-24 17:55:01
I thought that the hardness of the rubber was high, but the vibration of the outdoor unit attached to the wall was taken cleanly and it became quiet without being transmitted to the wall.
Used as car muffler rubber
On 2017-05-05 21:27:13
It is solidly built, so it seems to last long because it is superior in tolerance over the one we have used up to now. Because it is a leading manufacturer, you can use it with confidence.
Substitutes for vehicle parts
On 2017-02-27 19:19:25
Used as a transfer mount. It has rubber hardness and it makes me feel silly.
Hanging a sirocco fan
On 2017-01-26 20:22:57
It was good as I was expecting. It was easy to use
For vibration isolation
On 2016-12-12 08:31:24
Shipment is also speedy, the product itself and packaging are perfect.
Used for engine mounts of small generators
On 2016-11-29 20:00:27
I purchased this item because it was not the size of Monotaro's brand. It is probably because it is a general-purpose product Bolt is long so it interferes so I cut it beforehand. However, since the price was suppressed considerably than the genuine parts, the merit is enough. I will also purchase it.
Replacement of silent compressor motor mount
On 2016-11-11 16:37:19
The vibration of the silent compressor which passed five years ago became intense, and it exchanged with KA - 25 - 27 H. I absorbed vibration and became quiet. I should have exchanged it faster.
Connected to paramotor chamber
On 2016-10-17 12:46:05
There is no problem with the rubber vibration insulator, but the bolt was too long.
Used as a substitute for heavy machinery parts.
On 2016-10-15 08:18:20
As an alternative part, the size was just right, the price was cheap and it was saved.
On 2016-06-03 07:10:06
It was inexpensive and inexpensive, and I did very good shopping. I want to use it again.
For old car
On 2016-04-07 23:59:09
Used as a substitute.
Used machine bonnet fastener
On 2016-03-30 08:30:33
It is almost the same as what we used to date, so far there is no problem. I bought it cheaply so I plan to purchase it in the future. There is no particular complaint. I am satisfied.
On 2016-03-12 16:55:20
Since it is a maker item, relief
On 2016-03-09 20:10:10
Pump vibration isolation
On 2015-12-15 18:03:41