The reviews are automatic translation.
Showing 1 - 20 of 99 Reviews which have 5 star
[ See all 127 customer reviews ]
Used for bikes
On 2018-05-10 12:27:34
I bought it because I bought a small amount and the price was affordable.
We do not have any difference with other manufacturers.
Used to fix the baffle board of my own speaker box
On 2018-05-02 08:15:02
It was used in combination with the ogre eye nut E type. The hole for the hexagonal wrench of the bolt head is large, and work at the time of tightening is easy to do.
As variations of commodities with larger bolt head diameters and products with thinner head thickness increase, it becomes easier to devise in terms of designing in terms of production.
Used for motorcycle bolt
On 2018-04-02 09:13:06
It can be used normally as a consumable item, and the price is more expensive than the home center, but I am satisfied at all considering the trouble of going to buy.
When food processing machine is repaired
On 2018-03-17 21:06:23
We are very satisfied with strength, material and welding.
On 2018-03-11 21:00:36
There is also a size that is not in the home center, and it is profitable because there is pack selling.
Screw change of bicycle
On 2018-03-05 05:04:42
The plating screws used for bicycle rusted, so we replaced them all with stainless steel. In fact I was thinking of using high strength stainless steel screws but since the usage was not that hard, I replaced it with this series screw. It was awfully saved because the price was only 1/3.
Competitive bicycle mounting parts
On 2018-03-01 14:42:41
It is very helpful to have a size that is not sold in the home center.
Used for prototype
On 2018-02-23 08:43:30
The thing was solid, and it was possible to use it without any trouble.
It's a very affordable item so I will refill it the next time as needed.
Production of mechanical equipment
On 2018-01-26 12:33:10
We purchased various kinds including other sizes. There is no hindrance at the time of use. It will be a great help if you provide us with long screws under neck or as custom order as all screws.
Exchange with iron screw from this
On 2018-01-04 16:18:08
After all the stain is good. It is unnecessary to maintain for a long time and has high precision.
Used as machining bolt for workpiece
On 2018-01-04 15:24:47
It is inexpensive and satisfactory, unchanged from those of the home center.
Fixing material to be cut of milling machine
On 2017-10-25 19:20:51
I could be tightened very smoothly, I am satisfied. The head of the bolt is cut by 0.5 mm with a milling cutter.
Used in machine replacement parts
On 2017-10-16 09:05:16
It is not particularly good or bad, it is ordinary bolt.
It is convenient because large diameter bolts that can not be purchased at home centers can be purchased in units of one.
On 2017-10-13 15:53:51
I use it for the exposed part of the motorbike exposed to the wind. Being careful will not be used to conclude the iron division. Because the ionization tendency is different, rust comes out in the iron part.
For replacing the bolt of the astronomical telescope equatorial mount
On 2017-09-13 17:15:27
I purchased it for attaching optional equipment to the equatorial mount for astronomical observation of a hobby, I was satisfied with a firm tightening.
Used as an adjusting bottle of pruning scissors
On 2017-08-14 15:24:24
Nothing in particular
I ordered the wrong length by mistake ... · · · · Cutting polishing was a little troublesome
On 2017-06-28 09:22:01
Although genuine iron bolt rusts immediately, it can maintain its good appearance because it does not rust, it is saved because it can be purchased from a small amount.
On 2017-06-24 15:20:59
It is very useful. Aligned with 5 mm There is no problem in quality.
On 2017-05-17 18:45:24
I can use it without any problems. The quantity was reasonable.
For assembling jigs
On 2017-05-01 09:49:21
There is nothing special to worry about, I am using. To be honest, I feel that there is somewhat backlash in fitting with a wrench, but it is a good thing with no problem in practical use, and affordable price is glad.