The reviews are automatic translation.
Showing 1 - 6 of 6 Reviews which have 1 star
[ See all 69 customer reviews ]
On 2018-02-09 14:49:46
I will not ask you to inquire about the nut of screw 3/8.
Please check more. There is a thin nut. SWN-3
Due to processing error of stainless pipe, it is a diameter drop.
On 2014-06-20 19:36:56
Processing of the stainless steel pipe was misdirected, it was purchased for diameter reduction and wound by stainless steel pipe by welding, but whether the material is bad, the welding rod is bad, the arm is bad Weld pin hole is made I will excuse you. When purchasing elsewhere, there was no such thing. Also, there are some things with inner diameter screws cut off, and it seems that the coupler is turning when the coupler is attached, and complaints came from customers.
1 part for spray lance manufacture
On 2014-05-26 17:53:42
The HEX dimensions are 19 plus 0.2, 19 minus 0.3 and tolerance which is impossible in Japan if it is a lost wax recipe, perhaps it is a sand mold? Is it? Moreover, the HEX core and the screw core are eccentric. Considering that it is made in China, the quality is too bad. Although it was a trial purchase but those purchased at the same time by Auene Industrial Co., Ltd. are \ 29 (excluding tax) expensive, they are worth more than losing ¥ 158 (tax exempt) in a mono tallow original product. Everyone can procure "cheap and bad". Monotaro says that marketing is good but merchandising is not good (tears)
Piping for well water
On 2013-11-08 21:06:19
There were multiple scratches on the outer thread part. Although it is a PT screw, it seems to leak if a seal tape is not wound. I scraped the dent part with a file and used it. Because it is in a plastic bag at the time of delivery, I think that it is not a wound attached during transportation.
Installation of water heater etc.
On 2011-01-20 21:46:27
It really can not be used. Because the female screw is greatly displaced from the center, the thinner part of the male thread and female thread is only about 1 mm. Although it may be defective, I want you to confirm it and ship it.
On 2010-02-16 10:30:23
Because the nut part is not a regular hexagon but it is deformed, there is a problem with the wrench tightening. Work while changing the size with the monkey was necessary. It looks bad because the hole center is off.