The reviews are automatic translation.
On 2018-01-28 18:36:15
Smaller screws make heads slippery, let's exchange tools frequently.
Maintenance of a car
On 2017-11-10 17:04:51
It is truly KTC. The price was high, so I could use it with confidence. I was tightly fitting the nut and the nut did not lick.
Pulley screw detachment
On 2016-05-08 18:07:38
Easy to use in a small place
JOG Front Disk Replacement Needed and Purchased
On 2016-04-30 01:29:03
Somewhat satisfied is because it is necessary to bend and bend while burning with a burner, because it hits the wheel when it is straight, it takes a little effort in that it does not enter the bolt, so it is satisfactory as a tool.
Replace bolt in narrow place
On 2015-11-07 13:04:30
It is a certain product. You can use it with confidence.
When there is torque
On 2015-11-03 17:55:37
On 2015-07-04 22:16:28
I purchased it for the fan belt of Renault · Kangoo, but I am very satisfied.
Maintenance of car etc.
On 2015-04-12 20:46:37
You can work with peace of mind. I do not seem to lick and I can also apply torque. You can use it until you die unless you do not lose it.
On 2015-03-11 13:25:36
I felt that the handle of the nut was also good as a first-rate manufacturer of fluffy stones.
Fan belt exchange
On 2015-02-07 06:05:20
There is no problem in use. There is no loss in tooling.
For maintenance of private car
On 2014-10-04 21:48:04
Frequent use and removal of small M10, M12 bolt is convenient. KTC is a very reliable manufacturer and straightforward type is very easy to use because it does not require power to remove the bolt.
On 2014-08-18 11:39:08
I do not use this size pretty much, but when there is a necessary time there is a shortage of power due to my recent age! It seems that this size has increased recently because it deals with imported cars. I think you can possess it!
On 2014-07-12 18:04:07
On 2014-06-22 15:50:37
Engine room maintenance work
On 2014-02-08 21:10:23
There is no problem as things are made by KTC of fluffy stones. It was a cheap shopping if I thought that putting out hands on cheap tools and bolting bolts.
Used for car maintenance
On 2013-11-05 23:56:03
It was good shopping with enough quality necessary just for KTC.
On 2013-09-18 20:48:30
Standard product, purchase for loss. There are many scenes that can not be work without this.
Construction machine maintenance.
On 2013-09-07 17:17:14
It is a convenient tool for tightening the propeller shaft for straight.
Long glass wrench
On 2013-04-29 19:37:00
Stone is KTC, quality is not a problem well. I will also use it.
When fan belt power steering belt is exchanged
On 2013-04-03 15:30:57
Although I thought that I wanted so far I have not had time to go out easily and have ordered immediately after seeing sale at Tamatama Monotaro but after all I can shorten working time 10-12 14-17 and purchased one by one.