The reviews are automatic translation.
On 2014-11-06 16:37:29
I want a little more blade length
On 2014-01-31 11:23:34
The product was fine, but the cardboard box for shipping was small, due to trouble of the shipping company, the goods arrived, it was delayed for a day.
Used for prototype router
On 2013-09-02 16:47:06
Since the blade diameter and the shank diameter are the same, deep scraping can be done without worrying about the interference. Price is also satisfactory. I thought that it would not break even if the load was raised slightly because it is 4 mm in diameter, but the overstock is not prohibited. It is also good to have a length.
Used for chemical wood and ABS resin in prototype machine
On 2013-07-08 14:12:16
It is easy to use because the same straight shank diameter and blade diameter can be used without concern for interference. There is also a shank length and CAM data can be created without worrying about interference. I am satisfied with the price, but I am hoping for further cost reduction as it is a consumable item.
Cutting processing of substrate etc. by CNC processing machine
On 2013-02-01 00:53:26
TiAlN coated 2 blades Carbide ball end mill (M) No.: 2 Block length is 2.5 mm against 4 mm for 4 mm, so it is difficult to break without blurring. The unit price is affordable, but I want you to make it a little cheaper.
2.5-dimensional machining of resin, aluminum, brass etc in CNC router
On 2012-11-25 23:28:52
As the application is CNC router processing of about hobby, evaluation like an expert can not be done, but in general it is thought that the shank diameter such as φ 4, 6, 8 · · · · · · is common for milling machine collets, , It is thankful that the shank part is perfect for φ 3 and the collet of the router for the blade diameter φ 3 or less. The price is relatively cheap as a ball end mill and it is saved. Not only for the main business but for people who use hobbies like us it is saved for price reasons.
R groove insertion into difficult-to-cut material, center hole, etc.
On 2012-08-24 16:32:52
If you use a short shank on a large double tapered spring collet, the taper on the back side will not tighten securely and chucking will be inadequate or the tip wobbles. I was thankful for this length as I was replacing collet chuck with small ones. Of course it is advantageous for cutting to a deep position. I expect that the lineup of blade diameters such as R 0.75 will increase.
Mini CNC milling machinery with a large number of corners R, mainly processing of resin parts.
On 2012-03-30 05:47:54
I am thankful that deep engraving has been made since the shank diameter is also the same as the blade diameter. Because it is a consumable item, as a ball end mill, the price is saved cheaply.
I use it as a milling bit.
On 2012-02-01 15:50:29
It is good to set the unit price and it is better to arrive earlier after placing orders.
Cutting of aluminum
On 2011-04-29 15:33:00
I did not feel a big difference compared with those of other companies.
On 2011-04-26 09:33:30
It can be used without any problem