Buy more than* S$200* and get FREE SHIPPING
Due to the maintenance, we will close our website on June/19 9:00-10:00 and June/23 0:00-0:30 JST. All customers cannot shop on our website during the time. Thank you.

All Products

Sort by:
Showing 1 - 30 of 235 Results
Show: 30 60 90
VIEW: Grid View List View
Air Angle Grinder
YANASE
5.00(1)
269.99 SGD
ADD TO CART
Exhaust Direction: Side, Size (mm): (Disk) phi58x10, Air Consumption (m3/min): 0.6, Working Pressure (MPa): 0.44 - 0.58, Revolution (min-1[r.p.m]): 22000, Weight (g): 530, Overall Length (mm): 140, Accessories: TOP minidisk #40, #60, #120 1 each regulator, coupler, replacement wrench, Allen wrench, each one
Category Work Tools, Electric-Pneumatic Tools > Pneumatic Tools > Grinder > Angle Grinders
Felt Polishing Wheel With Shaft, Hexagonal Shaft For Impact Use
YANASE
5.00(7)
7.99 - 12.99 SGD
Caution: Please use the coated abrasive (abrasive wax)., Hexagon Opposite Side(mm): 6.35
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Paper With Axis
Cup Brush With Shaft Stainless Steel
YANASE
8.99 SGD
ADD TO CART
Purpose: Flat and concave-Board surface polishing.Wide range of polishing, cleaning, surface finish., Metal Fitting Diameter (mm phi): 50, Outer Diameter (phi mm): 65, Material (Brush Part): Stainless wire, Trim Length (mm): 25, Wire Diameter (phi mm): 0.28, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Cup Type Brushes
Cup Brush With Brass Axis
YANASE
2.67(3)
8.99 SGD
ADD TO CART
Purpose: Flat and concave-Board surface polishing.Wide range of polishing, cleaning, surface finish., Metal Fitting Diameter (mm phi): 50, Outer Diameter (phi mm): 65, Material (Brush Part): Brass wire, Trim Length (mm): 25, Wire Diameter (phi mm): 0.28, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Cup Type Brushes
Felt Shank Wheel
YANASE
4.00(8)
9.99 SGD
Purpose: Mirror finish polishing of metals such as steel, stainless steel.Sisal wheel with axis, cotton wheel after polishing.Wiping metals, bringing out the shine and luster., Width (mm): 25, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
Lapping Film Sheet
YANASE
5.00(2)
45.99 - 46.99 SGD
Category Cutting Tools, Abrasives > Abrasives > Hand Grinding > Polishing Sheets > Polishing Sheet With Abrasive Material
Sus304 Foil Brush With Stainless Axis
YANASE
4.67(3)
8.99 SGD
ADD TO CART
Purpose: Suitable for narrow grooves and polished, cleaned and surface finish.Takes off rust and dirt, and can be used on a flat surface, Metal Fitting Diameter (mm phi): 38, Outer Diameter (phi mm): 75, Material (Brush Part): Stainless wire, Wire Diameter (phi mm): 0.25, Maximum Rotation Speed (min-1[r. p.m]): 4500, Thickness (mm): 13, Shaft Diameter (phi mm): 6, Application: For the polishing of stainless steel, aluminum products.
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Wheel Brushes, Flat Brushes
TOP DISK (SILICON CARBIDE)
YANASE
4.67(3)
6.99 SGD
Number of Blades: 90, Maximum Rotation Speed (min-1[r. p.m]): 13000, Hole Diameter (phi mm): 15, Diameter (phi mm): 100
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Cloth Disk
Plate Mounted Grinding Disc
YANASE
3.00(6)
7.99 - 8.99 SGD
Compatible Materials: Iron, stainless steel, aluminum, stone, glass, Outside Diameter x Bore Diameter (phi mm): 100x15
Category Cutting Tools, Abrasives > Abrasives > Grinder Grinding Wheel > Elastic Bonded Mounted Pointed
Felt Shank Wheel, Cylindrical
YANASE
4.00(1)
5.99 - 7.99 SGD
Caution: Please use the coated abrasive (abrasive wax)., Purpose: Mirror-finish polishing of metals.Mirror finish polishing for after polishing on hemp and cotton buffing wheels.Wiping metals, bringing out the shine and luster.
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
Mushroom buff
YANASE
10.99 - 49.99 SGD
Purpose: Buff for specular finish, Color: White, Shaft Diameter (phi mm): 6, Material: Cotton
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
White Buffing Compound
YANASE
1.00(1)
29.99 SGD
ADD TO CART
Purpose: Hard metal mirror luster finish. Stainless steel and chrome metal hard plating surface., Hard metal mirror luster finish. Stainless steel and chrome metal hard plating surface., 2014 TRUSCO Published Page: 2-1810, Outside Dimension (depth D x Width W x Height H) (mm): 130x55x40, Weight (g): 500, 500, TRUSCO Part Number: 405-0177, Specification: for buff, bias cotton buff, emery buff, Buff/bias cotton buff, emery wheel
Category Cutting Tools, Abrasives > Abrasives > Hand Grinding > Buffing and Polishing Conpounds > No Chrome
Flap Wheels With Shaft, 3 Mm Shaft
YANASE
4.75(4)
65.99 - 74.99 SGD
Shaft Diameter (phi mm): 3
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Flap Wheel
A Wheel Brush With A Steel-Wire Axis
YANASE
3.00(1)
6.99 SGD
ADD TO CART
Purpose: Suitable for narrow grooves and polished, cleaned and surface finish.Takes off rust and dirt, and can be used on a flat surface, Metal Fitting Diameter (mm phi): 36, Outer Diameter (phi mm): 75, Material (Brush Part): Steel wire, Wire Diameter (phi mm): 0.25, Maximum Rotation Speed (min-1[r. p.m]): 4500, Thickness (mm): 13, Shaft Diameter (phi mm): 6, Application: For Steel rust, peeling paint, before plating coating substrate polishing, press cutting, deburring.
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Wheel Brushes, Flat Brushes
Shank Wheel Brush Mounted
YANASE
5.00(1)
7.99 SGD
ADD TO CART
Purpose: Flat and concave-Board surface polishing.Wide range of polishing, cleaning, surface finish., Metal Fitting Diameter (mm phi): 50, Outer Diameter (phi mm): 65, Material (Brush Part): Steel wire, Trim Length (mm): 25, Wire Diameter (phi mm): 0.28, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Cup Type Brushes
Wool Buff
YANASE
5.00(1)
26.99 - 45.99 SGD
2014 TRUSCO Published Page: 2-1575
Category Cars, Truck Equipment > Sheet Metal, Paintings > Polishing > Buffs > Buff > Woolbuck > with Intermediate Sponge
Sponge Buff Phi125
YANASE
4.67(3)
19.99 - 20.99 SGD
2014 TRUSCO Published Page: 2-1575
Category Work Tools, Electric-Pneumatic Tools > Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Buffs
Restore Sander
YANASE
5.00(1)
39.99 SGD
Caution: it can not be used in restore sander only Please use with the special pad (not included)., Purpose: Rust and paint removal work.Takes off sanding scratchesRemoval of spot welding and deburring., Maximum Speed (min-1[r. p.m]): 13000, Outer Diameter (phi mm): 100, Hole Diameter (phi mm): 15, Abrasive Material: Aluminium oxide
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Cloth Disk
Impact Mushroom Buff, Hex Shank
YANASE
4.67(3)
11.99 - 21.99 SGD
Hexagon Opposite Side(mm): 6.35
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
Concrete Top Disk
YANASE
4.00(5)
8.99 SGD
Purpose: USES LARGE C ABRASIVE MATERIALS.Ideal for chamfering and maintenance!, Maximum Speed (min-1[r. p.m]): 12000, Outer Diameter (phi mm): 100, Hole Diameter (phi mm): 15, Abrasive Material: C
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Cloth Disk
Wheel Brush With Brass Axis
YANASE
8.99 SGD
ADD TO CART
Purpose: Suitable for narrow grooves and polished, cleaned and surface finish.Takes off rust and dirt, and can be used on a flat surface, Metal Fitting Diameter (mm phi): 36, Outer Diameter (phi mm): 75, Material (Brush Part): Brass wire, Wire Diameter (phi mm): 0.25, Maximum Rotation Speed (min-1[r. p.m]): 4500, Thickness (mm): 13, Shaft Diameter (phi mm): 6, Application: Woodworking smoothing polishing, finishing and polishing of copper and alloy products
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Wheel Brushes, Flat Brushes
End Brush With Steel Wire Shaft
YANASE
3.99 SGD
ADD TO CART
Purpose: Polishing narrow holes, grooves, etc.Bottom of the rust remover, cleaning, surface finish., Cylinder Length (mm): 25, Cylinder Diameter (mm): 15, Trim Length (mm): 30, Wire Diameter (phi mm): 0.3, Shaft Length (mm): 25, Maximum Rotation Speed (min-1[r. p.m]): 8000, Shaft Diameter (phi mm): 6, Application: For Steel rust, peeling paint, before plating coating substrate polishing, press cutting, deburring.
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Brush With Axis > Cylinder type, brush type, end type brush
Shank Cotton Wheel, Finishing
YANASE
1.00(1)
81.99 SGD
ADD TO CART
Purpose: Perfect for mirror finishes Leaves a beautiful finish after the sisal wheels., Maximum Operating Speed (m/s [m/min]): 16, Maximum Rotation Speed (min-1[r. p.m]): 6100, Size: 50x25x6, TRUSCO Part Number: 332-3633, Application: To the final polishing before a felt disk.
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
Grinding Wheel, GP Disk
YANASE
55.99 - 97.99 SGD
Maximum Operating Speed (m/s [m/min]): 63
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Cloth Disk
Paper Flap Disc, GP Sander Paper
YANASE
80.99 SGD
Outer Diameter (phi mm): 100, Revolution (min-1[r.p.m]): 8000, Width (mm): 25
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Wheel
Nell Wheel With Shaft
YANASE
67.99 - 83.99 SGD
Shaft Length (mm): 42, Thickness (mm): 25, Shaft Diameter (phi mm): 6
Category Cutting Tools, Abrasives > Abrasives > Shank Mounted Stones > Felt Buff
Happy TOP disk phi 180
YANASE
4.50(2)
18.99 - 19.99 SGD
Maximum Rotation Speed (min-1[r. p.m]): 8000, Hole Diameter (phi mm): 22, Diameter (phi mm): 180
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Polishing Cloth Disk
regy soft S
YANASE
3.00(2)
34.99 SGD
Purpose: it grind the iron, the stainless steel, the aluminum and the molding, Maximum Operating Speed (m/min): 67, Outer Diameter (phi mm): 100, Hole Diameter (phi mm): 15, Compatible Tool: Disc grinder, Abrasive Material: AC, Thickness (mm): 3
Category Cutting Tools, Abrasives > Abrasives > Grinder Grinding Wheel > Flexible Wheel
Sg Cotton Disks
YANASE
36.99 - 41.99 SGD
Purpose: Final finishing of metal before mirror finishing., Maximum Speed (min-1[r. p.m]): 8000, Outer Diameter (phi mm): 100, Hole Diameter (phi mm): 15
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Felt Disk
FF Disc
YANASE
7.99 - 34.99 SGD
Outer Diameter (phi mm): 100, Hole Diameter (phi mm): 15
Category Cutting Tools, Abrasives > Abrasives > Polishing Thunder grinder > Disk Type

1 2 3 4 5 6 7 8 Next

Yanase Related Products

Related Products