Buy more than* S$200* and get FREE SHIPPING

Force Gauge

Sort by:
Showing 1 - 30 of 66 Results
Show: 30 60 90
VIEW: Grid View List View
Digital Force Gauge
SHIMPO (NIDEC-SHIMPO)
579.90 SGD
Pricision: +/-0.3R.C., Dimension (Length L x Width W x Thickness) (mm): 147x75x38, Accessories: -
Category Force Gauge
Push Pull Gauge
IMADA
5.00(2)
509.90 - 529.90 SGD
Body Dimensions (Width x Depth x Height) (mm): 67x48x232.5, Functions: Peak holding (needle stop function), Allowable Temperature (degreeC): 0 - +40, Pricision: +/-0.3%F.S, Body Weight (g): About 600, Stroke (mm): 10, Accessories: Attaching portions 6 (small hook, a common type, a cone, A type, V type, a connection lot), an accommodating case, an inspection report, an operation manual, Application: Measure touch ability of touch panel and keybord. Measure take over ability of tape and sticker
Category Force Gauge
Digital Force Gauge
IMADA
3.00(1)
799.90 - 1,049.90 SGD
Output Function: RS232C, analog voltage (about 1V), Mitutoyo Digimatic, Sampling Period: Maximum / 1000 times / sec, Body Dimensions (Width x Depth x Height) (mm): 66x33x189
Category Force Gauge
Analog Handy Force Gauge
JAPAN INSTRUMENTATION SYSTEM
399.90 - 449.90 SGD
Stroke (mm): 10
Category Force Gauge
Digital Force Gauge
SHIMPO (NIDEC-SHIMPO)
5.00(1)
919.90 SGD
Memory Function: (Can be switched the memory of three) 50 contiguous memory 1000/100 single memory / memory standard. Yes Statistics function (maximum and minimum peak-to-average standard deviation), Output Signal: 100 times / second (communication with a PC is possible by a dedicated communication software) maximum continuous transmission USB, RS-232C, analog, over-load, comparator, Unit: N, kg (g) can be displayed upside down, Measurement Method: Normal measurement, plus peak measurement, minus peak measurement, Pricision: And -0.2% + / -1/2digit (at 23deg C) / of rated capacity +, Dimension (Length L x Width W x Thickness) (mm): 147x75x38, Weight (g): About450, Accessories: 6 kinds of measurement adapter, hanger, AC adapter, carrying case, USB cable
Category Force Gauge
Film Chuck
IMADA
5.00(1)
129.90 SGD
Maximum Working Load (N): 500
Category Force Gauge
Handy Force Gauge
JAPAN INSTRUMENTATION SYSTEM
879.90 - 1,159.90 SGD
Weight (kg): 1.35, 1.35
Category Force Gauge
Manual Vertical Test Stand [Lever]
JAPAN INSTRUMENTATION SYSTEM
1,889.90 SGD
ADD TO CART
Allowable Load (N): 500, 500, Body Dimensions (Width x Depth x Height) (mm): 320x300x590, 320x300x590, Weight (kg): 24, 24, Stroke (mm): 150, 150
Category Force Gauge
Manual Vertical Test Stand with Length measurement
JAPAN INSTRUMENTATION SYSTEM
2,239.90 SGD
ADD TO CART
Allowable Load (N): 500, 500, Body Dimensions (Width x Depth x Height) (mm): 320x300x590, 320x300x590, Weight (kg): 24, 24, Stroke (mm): 150, 150
Category Force Gauge
Manual Horizontal Test Stand [Lever]
JAPAN INSTRUMENTATION SYSTEM
2,299.90 SGD
ADD TO CART
Allowable Load (N): 200, 200, Body Dimensions (Width x Depth x Height) (mm): 470x200x250, 470x200x250, Weight (kg): 14, 14, Stroke (mm): 200, 200
Category Force Gauge
Connector Clamp
IMADA
139.90 - 169.90 SGD
Maximum Working Load (N): 1000, Mouth Width (mm): 20
Category Force Gauge
Dynamometer Cam Chuck
IMADA
309.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped., Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 36x22x64
Category Force Gauge
Pantograph Chuck
IMADA
339.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped.  ※ unaccompanied concerning the commodity, in the case of COD orders will be shipped after the next day, Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 73x19x101
Category Force Gauge
Pin Chuck
IMADA
119.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped., Maximum Working Load (N): 150, Mounting Screw Diameter: M6, Opening Width (mm): Maximum /phi0-3.2, Body Dimensions (Width x Depth x Height) (mm): 10x60, Body Weight (g): About 22, Material: iron
Category Force Gauge
Vice Jig
IMADA
339.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped., Maximum Working Load (N): 1000, Mouth Width (mm): 38, Body Dimensions (Width x Depth x Height) (mm): 80x133x45
Category Force Gauge
Force Gauges
A&D
409.90 SGD
ADD TO CART
2015 Trusco Published Pages: 1 1230, Over-range Display: "ーーーー" display, Maximum Displacement Amount (mm): About 0.25, Allowable Maximum Load (N): 68, Response Speed: About 0.2sec (first), about 0.6sec (slow), Operating Temperature/Humidity Range: 0 over 50 degree C, 80% RH or less (no condensation), Measuring Unit: N (Newton), Battery life (hours): About 20 with manganese battery use (consumption current of about 24mA), Measuring Range (N): 0-50.00, Resolution Capability: 0.01N, Dimensions (Width W x Height H x Depth D) (mm): 83x227x39, Measurement Pricision: + / Over (0.4% rdg + 1dgt) at room temperature, Display: 5-digit LCD display, Power: AA batteries six or an optional AC adapter (input 100VAC, 50 / 60Hz), Weight (g): About 550 (including battery), TRUSCO Part Number: 288-3236, Acces...
Category Force Gauge
Wedge chuck
IMADA
5.00(1)
399.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Maximum Working Load (N): 1000, Body Dimensions (Width x Depth x Height) (mm): 46x14.5x59
Category Force Gauge
Digital Force Gauge
IMADA
1,269.90 SGD
Caution: ※ 5N or less model can display mN, 1000N or more can display kN. In addition, it is also possible to display unit of kg (g: 5N or less range) as converted value. * Continuous data acquisition with USB memory is 100 times / sec at maximum. ※ There are thin, ※ 5N or less model can display mN, 1000N or more can display kN. In addition, it is also possible to display unit of kg (g: 5N or less range) as converted value. * Continuous data acquisition with USB memory is 100 times / sec at maximum. ※ There are thin, Measuring Unit: N, (mN, kN), Pricision: +/-0.2%F.S.+/-1digit
Category Force Gauge
Force Gauge Cutput Cable
SHIMPO (NIDEC-SHIMPO)
80.96 SGD
ADD TO CART
Category Force Gauge
Manual simple test stand
SHIMPO (NIDEC-SHIMPO)
1,059.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Force Gauge
Digital Force Gauge MODEL-RZ Series
Aikoh Engineering
869.90 - 979.90 SGD
Tolerable Overload: 120% of the rated capacity (overload warning at 110% medicine), Display Update Period: 1 times / sec, 2 times / sec, 5 times / sec, 10 times / sec, 20 times / sec switching, Tip Axis: M6, Sampling Period: 1ms, 5ms, 16ms, 50ms, 125ms, 250ms switching, Measurement Unit: N or (gf) kgf / N / lb switch, Dimensions (Width W x Depth D x Height H) (mm): 68x40x232, Operating Temperature Range (deg C): 0-+40, Weight (g): About 375
Category Force Gauge
Attachment for Force Gauge
SHIMPO (NIDEC-SHIMPO)
139.90 - 2,449.90 SGD
Category Force Gauge
Digital Force Gauge
IMADA
1,059.90 - 1,139.90 SGD
Category Force Gauge
General purpose Chuck
JAPAN INSTRUMENTATION SYSTEM
229.90 SGD
ADD TO CART
Caution: ※ with high hardness sample might slip occurs. ※ If you want to use the up and down it is required pair., Mounting Screw Diameter: M6, Withstand Load: 1kN
Category Force Gauge
Digital Force Gauge FG-20KG
Tokyo Glass Kikai (TGK)
879.90 SGD
ADD TO CART
Outside Dimension (mm): 83x227x39H, 83x227x39H, Weight (g): 550, 550, Model: FG-20KG, FG-20KG, TGK Product Number: 825-63-79-03, 825-63-79-03
Category Force Gauge
Auto Vertical Servo Stand
JAPAN INSTRUMENTATION SYSTEM
3,829.90 SGD
ADD TO CART
Allowable Load (N): 1000, 1000, Body Dimensions (Width x Depth x Height) (mm): 220x340x540, 220x340x540, Weight (kg): 20, 20, Stroke (mm): 250, 250
Category Force Gauge
Auto Horizontal Servo Stand
JAPAN INSTRUMENTATION SYSTEM
5,039.90 SGD
ADD TO CART
Allowable Load (N): 1000, 1000, Body Dimensions (Width x Depth x Height) (mm): 560x260x270, 560x260x270, Weight (kg): 25, 25, Stroke (mm): 250, 250
Category Force Gauge
Manual Vertical Test Stand [Knob]
JAPAN INSTRUMENTATION SYSTEM
1,089.90 SGD
ADD TO CART
Allowable Load (N): 100, 100, Body Dimensions (Width x Depth x Height) (mm): 150x200x270, 150x200x270, Weight (kg): 8, 8, Stroke (mm): 23, 23
Category Force Gauge
Manual Vertical Test Stand [Handle] 200N
JAPAN INSTRUMENTATION SYSTEM
1,669.90 SGD
ADD TO CART
Allowable Load (N): 200, 200, Body Dimensions (Width x Depth x Height) (mm): 330x300x580, 330x300x580, Weight (kg): 16, 16, Stroke (mm): 100, 100
Category Force Gauge
Manual Vertical Test Stand [Handle] 500N
JAPAN INSTRUMENTATION SYSTEM
1,889.90 SGD
ADD TO CART
Allowable Load (N): 500, 500, Body Dimensions (Width x Depth x Height) (mm): 320x300x590, 320x300x590, Weight (kg): 24, 24, Stroke (mm): 150, 150
Category Force Gauge

1 2 3 Next