Buy more than* S$200* and get FREE SHIPPING

Wooden House Joining Hardware

Sort by:
Showing 1 - 30 of 339 Results
Show: 30 60 90
VIEW: Grid View List View
Hardware Screw
Tanaka
4.67(3)
2.90 - 26.96 SGD
Category Wooden House Joining Hardware > Original Hardware > Hardware Screw
Corner Bracket Plywood Type
Kaneshin
1.01 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Short-term tensile strength reference junction (P0t) 3.7kN, N Value: 0.69, Laws and Regulations: Daira 12 public notice notification No. 1460, no.2 (RO), Surface Processing: Dip zinc-6% aluminium-3% magnesium alloy coated steel sheets, Standard: (GOODS) 2435 NO. 09 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 0881 NO., Material: ZAM * (MSM-HC-DZC90 or MSM-CC-DZC90), Accessories: PILLAR SIDE ONLY SCREW (CPQ-45) (GREY) X 2 TUBES AND FOUNDATION (BEAM) SIDE ONLY SCREW (CPQ-75) (BLUE) X 2
Category Wooden House Joining Hardware > Original Hardware > Joint Hardware
Plate Bracket
Kaneshin
1.99 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Short-term tensile strength reference junction (P0t) 8.4kN, N Value: 1.5, Laws and Regulations: Daira 12 public notice No. 1460 advice no. 2 (to), Plate Thickness (mm): 0.6, Standard: (GOODS) 2435 NO. 06 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 2252 NO., Material: NSS431DP-2 (high intensity diplophase stainless steel), Accessories: (No. 45) Rectangular-head screw CPQ-8(Gray) x 6 pcs.
Category Wooden House Joining Hardware > Original Hardware > Joint Hardware
Both Screw Bolts And Nuts
Naniwa Bolt
3.75(4)
1.46 - 12.09 SGD
Category Wooden House Joining Hardware > Z Mark Hardware > Double Pulling Bolt
Corner Bracket
Kaneshin
4.38(8)
0.78 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Short-term tensile strength reference junction (P0t) 4.2kN, N Value: 0.79, Laws and Regulations: Daira 12 public notice notification No. 1460, no.2 (RO), Surface Processing: Dip zinc-6% aluminium-3% magnesium alloy coated steel sheets, Standard: (GOODS) 2435 NO. 09 A BUILDING MATERIALS TEST CENTER QUALITY PERFORMANCE TRIAL REPORT FOR 08 A / 0880 NO., Material: ZAM * (MSM-HC-DZC90 or MSM-CC-DZC90), Accessories: (No. 45) Rectangular-head screw CPQ-4(Gray) x 6 pcs.
Category Wooden House Joining Hardware > Original Hardware > Joint Hardware
Corner Bracket
Kaneshin
4.50(2)
0.98 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, HOUSEPLUS Resident Warranty: HP11-KT010/HP11-KT012, Notice No.1460 No.2: IsIs, N Value: (Center pillar)1.1, (corner pillar)1.0, Short Allowable Tensile Strength (kN): (Center pillar)6.3, (corner pillar)5.8, Plate Thickness (mm): 1.6, Surface Processing: Hot-dip zinc-6% aluminium-3% magnesium alloy coated steel sheets, Dimension (mm): 60x40, Material: ZAM * (MSM-HC-DZC90 or MSM-CC-DZC90), Accessories: (No. 45) Rectangular-head screw CPQ-6(Gray) x 6 pcs.
Category Wooden House Joining Hardware > Original Hardware > Joint Hardware
Metal Corner Bracket
Tanaka
5.30 SGD
ADD TO CART
Caution: For tightening dedicated angle bit screw TBA-65D and TBA-30 , please use the (optional) third square bit., Purpose: Used to connect pillar and horizontal beam, Proof Strength Test: Short-period standard tensile strength/8.3kN, Laws and Regulations: Second issue Notification No. 1460 (to), Surface Processing: Hot-dip galvanized steel sheet (Z 27) , Standard: No. No. 01A3046 goods and Testing Center for Construction Materials Performance Test , Dimension (mm): 25x120x120, Thickness (mm): 3.2, Material: JIS G 3302 SGCC or SGHC (steel strip and hot-dip galvanized steel sheet), Accessories: Dedicated angle Bittobisu (TBA-65D) x4 lines, (TB-101) x4 this
Category Wooden House Joining Hardware > Original Hardware > Joint Hardware
Hexal Bolt Nut
Naniwa Bolt
0.78 - 4.24 SGD
Category Wooden House Joining Hardware > Z Mark Hardware > Hexagon Bolt and Washer
Lag Screw
Naniwa Bolt
4.60(5)
0.40 - 1.71 SGD
Screw Diameter: M12, Material: Iron
Category Wooden House Joining Hardware > Z Mark Hardware > Lag Screw
Anchor Bolts
Naniwa Bolt
5.00(1)
1.88 - 139.90 SGD
Screw Diameter: M12, Material: Carbon steel
Category Wooden House Joining Hardware > Z Mark Hardware > Anchor Bolt
Hardware Screw
Kanai
5.00(1)
3.18 - 20.95 SGD
Category Wooden House Joining Hardware > Original Hardware > Hardware Screw
Right Angle Bracket
Kaneshin
5.00(1)
1.23 SGD
ADD TO CART
Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Purpose: Used to connect pillar and foundation, pillar and horizontal beam, Proof Strength Test: Tensile yield strength (middle pillar / corner posts) Short-term standard junction (Pot) 6.0kN / 5.9kN, junction magnification (N value) 1.1 / 1.1, Surface Processing: -6% Molten zinc aluminum -3%, magnesium alloy plated steel sheet , Standard: HP11-KT011 / HP11-KT013 (stock) performance test house plus confirmatory test, Dimension (mm): 60x40x1.6, Material: (MSM-CC-DZC90 or MSM-HC-DZC90) ZAM ※, Accessories: Pillar side dedicated screw CPQ-45 (gray) x3 lines, foundation dedicated side screw CPQ-75 (Blue) x3 this
Category Wooden House Joining Hardware > Original Hardware > Joint Hardware
Joint Bracket, "New Kuru-Pita"
Aim
14.08 SGD
ADD TO CART
Set Contents: Joint metal fittings (material welded to 2 steel pipes of phi 22 mm outer diameter and 2.8mm-thick) x 1 piece, bolt (M16) x 2 (with 1 taper and 1 long screw)
Category Wooden House Joining Hardware > Original Hardware
Screw Stopper Omega Brace
Tanaka
2.00(1)
13.29 SGD
ADD TO CART
Equality Certificate: D15A08-01, Surface Processing: equivalent toJIS G 3302 (Z27), Standard: Japan Housing and Wood Technology Center, certified goods Z MARK hardwire (Chisel HB) EQUIVALENT CERTIFICATION, Thickness (mm): 1.6, Material: NFG550F, Accessories: Special (NO. 3) ANGLE OF bit screw (TBA-65D) x 12 BOOK, Application: Reinforcement of corners of roof truss and floor framing. Can be used as base of flint.
Category Wooden House Joining Hardware > Original Hardware > Flint Hardware
Flat Plate SD
Tanaka
5.00(1)
1.23 SGD
ADD TO CART
Performance Certified: S10A04-02, Notice No.1460 No.2: Is, N Value: Under 1.1, Short Allowable Tensile Strength (kN): 5.9, Surface Processing: Alloy coated steel sheets, Thickness (mm): 0.6, Material: NSDC570/ZYXK18, Accessories: Exclusive (No. 3) bit angle screws (TB-45)x6 pcs, Application: Used to connect pillar and foundation, pillar and horizontal beam
Category Wooden House Joining Hardware > Original Hardware > Column Joint Hardware
Anchor Bolts
Naniwa Bolt
7.32 - 139.90 SGD
Screw Diameter: M16, Material: Carbon steel
Category Wooden House Joining Hardware > Z Mark Hardware > Anchor Bolt
Joint Tool, Hole Down Corner 10kN
Tanaka
5.00(1)
6.02 SGD
ADD TO CART
Short Standard Joint Strength (kN): (Corner of mast-)12.4, Performance Certified: S10A02-06, HOUSEPLUS Resident Warranty: HP08-KT031, Notice No.1460 No.2: To, N Value: 2.5 or less, Short Allowable Tensile Strength (kN): (In the mast-)13.5, Surface Processing: Alloy coated steel sheets, Thickness (mm): 2.3, Material: NSDHC/ZYXK18, Accessories: Special (NO. 3) ANGLE OF bit screw (TBA-65D) x 6 BOOK, Application: Used to connect pillar and horizontal beam
Category Wooden House Joining Hardware > Original Hardware > Brace Joint Hardware
Construction Bracket Main Plate
Kanai
4.00(1)
0.80 SGD
ADD TO CART
Testing Center for Construction Materials: No. No. 10A2964, Notice No.1460 No.2: The, N Value: 1.0 or less, Short Allowable Tensile Strength (kN): 5.2, Plate Thickness (mm): 0.6, Surface Processing: Zinc alloy, Dimension (mm): 100x45, Material: SuperDyma NSDC570, Accessories: Bis YA-S45 (Silver) x6 Movies
Category Wooden House Joining Hardware > Original Hardware > Joint Hardware
Brace Hardware
OsakaSpirit
4.33(6)
13.04 SGD
ADD TO CART
Using Connector: (1 NAIL) 6-ZF55, (SMALL SQUARE WASHERS)2-W2.3 x 30 (HEXAGON BOLT, HEXAGON NUT) 2-M12, (SQUARE WASHERS)2-W4.5 x 40, Surface Processing: Hot-dip galvanizing, Standard: Z MARKED CONNECTOR, Material: JIS G3302 Hot dip galvanized steel
Category Wooden House Joining Hardware > Z Mark Hardware > Flint Hardware
Wing Plate Bolt
OsakaSpirit
4.50(4)
1.57 - 81.71 SGD
Overall Length L (mm): 280
Category Wooden House Joining Hardware > Z Mark Hardware > Battledore Bolt
Quake Resistant J Cable
TESAC
40.92 SGD
ADD TO CART
Material: WIRE ROPE/SUS304, SG SOCKETS / TAPER WASHER /SS400 (ELECTRO GALVANIZING), Set Contents: WIRE ROPE, SG SOCKET, TAPER WASHER
Category Wooden House Joining Hardware > Original Hardware
Joint Bracket, "Supreme Plate"
Kanai
0.99 SGD
ADD TO CART
Testing Center for Construction Materials: 09A0618, Notice No.1460 No.2: Is, N Value: Below 1.3, Short Allowable Tensile Strength (kN): 6.9, Thickness t (mm): 0.6, Surface Processing: Zinc alloy (Hot-dip galvanized steel plates), Overall Length (mm): 120, Material: SUPERDYMA NSDC570, Specification: Short-period standard tensile strength 6.9 kN, Accessories: Flat screw YA-F45 (SILVER) 4pcs
Category Wooden House Joining Hardware > Original Hardware
Decorative Stainless Steel Ornament
Kaneshin
89.38 - 109.90 SGD
Category Wooden House Joining Hardware > Original Hardware
Mini Corner S
Kaneshin
2.11 SGD
ADD TO CART
Testing Center for Construction Materials: (No plywood)06A2651 (plywood 30 mm), 06A2652, Notice No.1460 No.2: Is, N Value: (No plywood)0.9 or less (plywood 30mm)1.0 or less, Short Allowable Tensile Strength (kN): (No plywood)5.1, (plywood 30mm) 5.6, Surface Processing: Hot-dip zinc-coated steel sheet (Z27), Material: JIS G 3302 SGHC, Caution: Always join this with the accompanying special screws Square bit of bonding screw (#3) is not included., Accessories: PILLAR SIDE ONLY (NO. 3) SQUARE SCREW CPQ-45 (GRAY) x 5 PCS., FOUNDATION (HORIZONAL) (NO. 3)-SIDE-ONLY SQUARE SCREW CPQ-75 (BLUE) X 4 PCS., Application: Used to connect pillar and foundation, pillar and horizontal beam
Category Wooden House Joining Hardware > Original Hardware > Column Joint Hardware
Joint Plate
Kanai
1.46 SGD
ADD TO CART
HOUSEPLUS Resident Warranty: HP02-KT006, Notice No.1460 No.2: ha, N Value: 1.2 or less, Short Allowable Tensile Strength (kN): 6.4, Surface Processing: 2B material (cloth) , Material: JIS G4305 SUS430, Caution: In order to ensure strength, anchor bolt setting position should be within 200mm from pole core. (Based on the Housing Finance Agency wooden house construction specification) Use 1 pc per 1 place. Use included screw or nail., Accessories: No. 3 square-bis (YA-S45x8 pcs.) , Application: Joint metallic material to joint column and base
Category Wooden House Joining Hardware > Original Hardware > Column Joint Hardware
Double Diagonal Brace
Tanaka
5.00(2)
3.44 SGD
ADD TO CART
Surface Processing: Hot-dip galvanized steel sheet (Z27), Standard: Japan Housing and Wood Technology Center Foundation Mark Z hardware (BP-2) equivalent certificatied, Thickness (mm): 2.3, Material: JIS G 3302(Hot-dip galvanized steel sheet and steel strip)SGHC or SGCC, Caution: Outdoor only. Please wear gloves, etc. in order to prevent injury., Accessories: Exclusive (No. 3) bit angle screws (TB-45)x15 pcs, Application: For joining brace of 45mm x 90mm (2 times magnification wall) to pole and beam
Category Wooden House Joining Hardware > Original Hardware > Brace Joint Hardware
Double Diagonal Brace Bracket
Tanaka
5.00(1)
4.43 SGD
ADD TO CART
Surface Processing: Hot-dip galvanized steel sheet (Z27), Standard: Japan Housing and Wood Technology Center Foundation Mark Z hardware (BP-2) equivalent certificatied, Thickness (mm): 2.3, Material: JIS G 3302(Hot-dip galvanized steel sheet and steel strip)SGHC or SGCC, Accessories: Exclusive (No. 3) bit angle screws (TB-45)x15 pcs, Application: For joining brace of 45mm x 90mm (2 times magnification wall) to pole and beam
Category Wooden House Joining Hardware > Original Hardware > Brace Joint Hardware
Joining Tool, Compact Corner
Tanaka
4.00(4)
1.60 SGD
ADD TO CART
Testing Center for Construction Materials: Number 06A3438, Notice No.1460 No.2: I-ro-ha, N Value: 1.2 or less, Short Allowable Tensile Strength (kN): 6.4, Surface Processing: Hot-dip galvanized steel sheet (Z27), Material: JIS G 3302(Hot-dip galvanized steel sheet and steel strip)SGHC or SGCC, Accessories: PRIVATE CORNER OF bit screw (TB-55) x 5, Application: Used to connect pillar and horizontal beam
Category Wooden House Joining Hardware > Original Hardware > Column Joint Hardware
Joint Tool, Slim Plate
Tanaka
5.00(2)
5.30 SGD
ADD TO CART
Equality Certificate: D1502-04, Notice No.1460 No.2: Is, N Value: 1.0 or less, Surface Processing: Hot-dip galvanized steel sheet (Z27), Standard: Japan Housing and Wood Technology Center, certified goods Z MARK BUSSAN (CP-T) EQUIVALENT CERTIFICATION, Thickness (mm): 2.3, Material: JIS G 3302(Hot-dip galvanized steel sheet and steel strip)SGHC or SGCC, Type: Cast iron pillar, Accessories: Special (NO. 3) ANGLE OF bit screw (TBA-65D) x 8 BOOK, Application: Used to connect pillar and horizontal beam
Category Wooden House Joining Hardware > Original Hardware > Column Joint Hardware
Flat T Shape Bracket
Off-Brand
4.60(5)
1.69 - 1.82 SGD
Standard: Z mark hardware, Accessories: Thick nails ZN 65x10pcs, Application: Joint top and bottom of the column which is tensiled
Category Wooden House Joining Hardware > Z Mark Hardware > Corner Hardware

1 2 3 4 5 6 7 8 9 10 ...12 Next