Due to the national holidays as Golden Week, we will close 2017/5/3~2017/5/5. This may cause delays with our responses. Thank you for your understanding.

Buy more than* S$200* and get FREE SHIPPING

Dynamometer and Torque Meter

Sort by:
Showing 1 - 30 of 68 Results
Show: 30 60 90
VIEW: Grid View List View
Film Chuck
Imada
129.90 SGD
Maximum Working Load (N): 500
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Torque Gauge
Nakamura Mfg.
589.90 SGD
ADD TO CART
Purpose: Optimal ultra-precision machine, the measurement and the tightening of the small torque, such as electronic equipment., Chuck Diameter (mm): 1-8.5, Torque Measurement Range (CNM): 10-150, Minimum Scale (cN, m): 2, Outer Diameter (phi mm): 63, Weight (g): 600, Overall Length (mm): 134, TRUSCO Part Number: 417-4216
Category Dynamometer and Torque Meter > Torque gauge
Torque Checker
Nitto Kohki
3,069.90 SGD
ADD TO CART
Caution: ※ impact driver, cushion clutch driver, can not be used in the electric driver for the robot., Measurement Range (N m): 4.00-12.00, Battery Capacity (mAh): 700, Charging Time (hours): 8, Outer Dimensions (Width W x Height H x Depth D) (mm): 200x487x112, Continuous Opreration Time (hours): 15, Weight (kg): 1.4
Category Dynamometer and Torque Meter > Torque meter
Bit Joint
Nitto Kohki
53.41 SGD
ADD TO CART
Torque Range (N, m [kgf, m]): 0.015-0.25, Compatible Models: DLT1133
Category Dynamometer and Torque Meter > Parts/Options
Screw Joint
Nitto Kohki
45.28 - 45.37 SGD
Category Dynamometer and Torque Meter > Parts/Options
Soft Joint
Nitto Kohki
249.90 SGD
ADD TO CART
Torque Range (N, m [kgf, m]): 4.0-12.0, Compatible Models: DLT1933
Category Dynamometer and Torque Meter > Parts/Options
Hard Joint
Nitto Kohki
119.90 SGD
ADD TO CART
Torque Range (N, m [kgf, m]): 4.0-12.0, Compatible Models: DLT1933
Category Dynamometer and Torque Meter > Parts/Options
Duralumin case
Nitto Kohki
269.90 SGD
ADD TO CART
Compatible Models: DLT1133,DLT1633
Category Dynamometer and Torque Meter > Parts/Options
Single point load cell / Platform scale type
A&D
359.90 SGD
Product Surface Size (mm): 400x600, Synthesis Error: 0.015%of R.O., Ultimate Overload Rating: 400%of R.C., Tolerable Overload: 300%of R.C., Insulation Resistance: 500Mohm or more / DC50V, Applied Voltage (V): (Recommended) DC12, (maximum) DC15, Cable Outside Diameter (mm phi): 6, Effect of Temperature: (Zero point) 0.04% of RO / 10 ℃ (output) 0.014% of Load / 10 ℃ Typ., Dust-proof Water-proof: IP54, Temperature Compensation (deg C): -10-40, Rated Output: 1mV/V+15%-0%, Resistance (omega): (Between the input terminal) about 400 (between the output terminals) 350 +/- 5, Cable Length (m): 2, Type: Platform scale type, Specification: Zero balance / 20 +/- 5% of RO
Category Dynamometer and Torque Meter > Load cell
Digital indicator for strain gauge sensor
A&D
859.90 SGD
ADD TO CART
Panel Cutout Dimensions (mm): 92x92, Measurement Point Number (points): 1, Analog Voltage Output: (D / A) up to +/- 10V can be set scaling by, output resolution 1/10000, temperature coefficient of 100ppm / ℃ (typ.), Temperature Characteristics: . Zero /+/-0.5microV/℃(Typ) span / + / - 30ppm / ℃ (Typ)., Hold: Sample-and-hold, peak hold, bottom hold, selected from bipolar hold, Power Consumption (VA): About 20, Operating Temperature and Humidity Range: -5 ℃ -40 ℃ / 85% RH or less (with no condensation), Maximum Display: +/-999999, Comparator Function: Upper and lower limit setting and HI, OK, possible LO contact output. 5-stage comparator function Contact capacity AC250V 0.1A or DC30V 0.5A long life MOS FET Relay, Compatible Sensor: Strain gauge sensor (output resistance 10kohm below), Other...
Category Dynamometer and Torque Meter > Torque meter
Digital torque meter
AS ONE
2,349.90 - 2,719.90 SGD
Rated Torque (N m): 2, Range Measurement: 0.000-+/-2.000N/m, Display Range: 0.000-+/-2.000N/c/0.0-+/-200.0N/b, Resolution Capability: 0.001N/c/0.1N/b, Weight (kg): 8, Dimension (mm): 320x227x126
Category Dynamometer and Torque Meter > Torque meter
Single point load cell
A&D
159.90 - 169.90 SGD
Product Surface Size (mm): 300x300, Synthesis Error: 0.02%of R.O., Ultimate Overload Rating: 200%of R.C., Tolerable Overload: 150%of R.C., Insulation Resistance: 2000Mohm or more / DC50V (B / E), Applied Voltage (V): (Recommended) DC12, (maximum) DC15, Cable Outside Diameter (mm phi): 3.5, Effect of Temperature: (Zero point) 0.023% of RO / 10 ℃ (output) 0.014% of Load / 10 ℃ Typ., Dust-proof Water-proof: IP54, Temperature Compensation (deg C): -10-40, Rated Output: 2mV/V+/-10%, Resistance (omega): (Between the input terminal) 420 +/- 30 (between the output terminals) 350 +/- 5, Cable Length (m): 0.4, Type: Platform scale type, Specification: Zero balance / + / - 5% of RO
Category Dynamometer and Torque Meter > Load cell
All Stainless Steel Junction Box
A&D
649.90 SGD
ADD TO CART
Weight (kg): 1.5
Category Dynamometer and Torque Meter > Load cell
Junction Box
A&D
249.90 SGD
ADD TO CART
Category Dynamometer and Torque Meter > Load cell
All Stainless steel beam type load cell / Tank・Floor scale type
A&D
319.90 - 539.90 SGD
Synthesis Error: 0.03%of R.O., Ultimate Overload Rating: 200%of R.C., Tolerable Overload: 150%of R.C., Cable Outside Diameter (mm phi): 4, Dust-proof Water-proof: IP67, Temperature Compensation (deg C): -10-40, Rated Output: 2mV/V+/-0.1%, Cable Length (m): 3, Dimensions L (mm): 2
Category Dynamometer and Torque Meter > Load cell
Torque Checker
Japan Instrumentation System
1,559.90 SGD
Category Dynamometer and Torque Meter > Torque meter
General purpose Chuck
Japan Instrumentation System
229.90 SGD
ADD TO CART
Caution: ※ with high hardness sample might slip occurs. ※ If you want to use the up and down it is required pair., Mounting Screw Diameter: M6, Withstand Load: 1kN
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Digital torque analyzer
Nakamura Mfg.
2,239.90 SGD
ADD TO CART
Purpose: Inspection of the torque wrench. To quality management based on ISO9001., Operating Temperature (degree C): 0-40, Minimum Scale (N / m): 0.1, Torque Measuring Range (N-m): 5.0-200, Character Height (mm): 25, Dimensions (Width W x Depth D x Height H) (mm): 280x200x200, Minimum : 0.1, Power: AC100V 50/60Hz, TRUSCO Part Number: 392-2936
Category Dynamometer and Torque Meter > Torque analyzer
RS232C Cable
SHIMPO
129.90 SGD
ADD TO CART
Cord Length (m): 2, Compatible Models: FGP-02/0.5/1/2/5/10/20/50/100
Category Dynamometer and Torque Meter > Parts/Options
Dynamometer Cam Chuck
Imada
309.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped., Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 36x22x64
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Electric measurement stand
Imada
2,969.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 214x428x574, Power Source (AC V): 100-240
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Connector Clamp
Imada
139.90 - 169.90 SGD
Maximum Working Load (N): 1000, Mouth Width (mm): 20
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Wedge chuck
Imada
5.00(1)
399.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Maximum Working Load (N): 1000, Body Dimensions (Width x Depth x Height) (mm): 46x14.5x59
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Pin Chuck
Imada
119.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped., Maximum Working Load (N): 150, Mounting Screw Diameter: M6, Opening Width (mm): Maximum /phi0-3.2, Body Dimensions (Width x Depth x Height) (mm): 10x60, Body Weight (g): About 22, Material: iron
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Vice Jig
Imada
339.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped., Maximum Working Load (N): 1000, Mouth Width (mm): 38, Body Dimensions (Width x Depth x Height) (mm): 80x133x45
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Softwear for ZP series
Imada
439.90 SGD
ADD TO CART
Caution: Digital force gauge ZP series dedicated software
Category Dynamometer and Torque Meter > Parts/Options
Lever type small measuring stand
Imada
969.90 SGD
ADD TO CART
Maximum Working Load (N): 1000, Body Dimensions (Width x Depth x Height) (mm): 200x280x410, Functions: Mechanical stopper, Body Weight (kg): About 7.3, Stroke (mm): 60
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Wire Harness Measuring Instrument
Imada
1,589.90 SGD
ADD TO CART
Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 155x450x182, Stroke (mm): 85
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Torque Meter Chuck
Imada
129.90 SGD
Body Dimensions (Width x Depth x Height) (mm): 40x8x15
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)
Pantograph Chuck
Imada
339.90 SGD
ADD TO CART
Caution: ※ hardness of the material, by surface treatment might not can be clamped.  ※ unaccompanied concerning the commodity, in the case of COD orders will be shipped after the next day, Maximum Working Load (N): 500, Body Dimensions (Width x Depth x Height) (mm): 73x19x101
Category Dynamometer and Torque Meter > Digital force gauge (push pull gauge)

1 2 3 Next