Floor Polishers

With plate (plastic) that can be attached with one touch

Strong surface cleaning can be done with just water. Work time can be shortened. Since the floor surface after removing the resin wax is finished smoothly, the gloss is quickly restored when reapplying. Easy to treat sewage.

Attach the special attachment (sold separately) to the wire brush with a screw and set the brush.

A floor pad made by applying abrasive grains to an extra-thick nylon non-woven fabric. For peeling work, especially for peeling old wax or thickly applied wax that cannot be removed with a stripping pad (the tile surface may be scraped too much). Used for peeling resin wax. Also for deburring con... Read More

For pad mounting. * A special plate bracket is required to attach it to the polisher.

It can be used for floor washer / polisher of any manufacturer. For cleaning the surface of resin wax. (Cleaning and polishing light stains on the surface of resin wax)

You can clean the surface of resin wax with just water. Since the floor surface is adjusted smoothly while working, subsequent work (wax recoating) can be performed efficiently and effectively. With an open structure with voids, it is less likely to be clogged and is suitable for efficiently work... Read More

A floor pad made of polyester non-woven fabric. Cleaning without damaging the surface of the resin wax using our unique binder technology. It suppresses the loss of luster that is annoying during cleaning work. Removes greasy heel marks on the floor surface. Durability is comparable to Scotch-Bri... Read More

For 8-inch floor polisher three-claw type. Used for cleaning weak to moderate stains on the floor A standard cleaning brush

Tip tool for micro polisher For polishing finish Abrasive paper for hiding scratches and pre-finishing

A floor pad made of nylon non-woven fabric coated with abrasive grains. It is used for cleaning resin wax in combination with water or a cleaning agent.

The microfiber has doubled and the water absorption rate has doubled. It reduces the number of sheets used and helps reduce costs. Scrapes dirt with a PP brush and efficiently absorbs sewage. A strong ally of the semi-dry construction method.

The hardness of the brush is normal. It can be washed anywhere. Nylon brush for polisher * Plate is sold separately.

For surface cleaning, poly bath, cleaning of glass surface

For polishing and baking

A floor pad made of polyester non-woven fabric coated with mineral particles. Used for light cleaning and polishing of resin wax surfaces.

Pad for condor polisher. For peeling, cleaning, and polishing.

A floor pad made by compressing melamine foam, which is an ultrafine fiber with a diameter of several μm, at a high magnification. Very fine and highly rigid ultrafine fibers penetrate into the pores of the flooring and remove dirt. Achieves high durability through our unique product design and p... Read More

For peeling

Dirt on plastic and glass surfaces

Tip tool for micro polisher Apply abrasives such as wax to work. Polishing, polishing, removing dirt

A carpet pad made of 100% microfiber with a PP brush woven in a loop. Since it comes with a PP brush, brushing and water recovery can be performed at the same time.

Please use EA899MW-102 together. Please use EA899MW-202 together. Carpet cleaning pad Used by attaching to the pad stand.

A floor pad made of polyester non-woven fabric. Used for polishing and baking resin wax.

A floor pad made of nylon non-woven fabric coated with abrasive grains. Used for peeling resin wax.

Smoothly adjust the resin wax surface while cleaning. The floor surface is adjusted to be smooth during daily cleaning, which suppresses gloss deterioration and maintains the aesthetic appearance for a long time. The surface is hard to get dirty and reduces the load of daily cleaning. Extend the ... Read More

Hard to scratch, clean the pool waterline, clean the walls

A floor pad made of polyester or nylon non-woven fabric coated with abrasive grains. Used for peeling and cleaning resin wax.

Replacement pad for attaching the tip tool to the micro polisher head Replacement pad for mounting each part of the micro polisher