All Category

Printer Stands

View : Grid List
Filter

Items 1 - 40 of 65

Set Ascending Direction
  1. SANWA Printer Stand
    SANWA SUPPLY SANWA Printer Stand
    * Please note the following points for products shipped directly from the furniture manufacturer. * We cannot accept changes, cancellations, returns, or exchanges after ordering due to customer's convenience. In case of unavoidable cancellation, we may charge a "cancellation fee" at... Read More
    Specification  Assembling type 
    Rating:
    100%
    from S$77.99
    Min. 2 days
  2. Printer Stand
    Sanwa Direct Printer Stand
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Mass (kg)  12  Dimensions, Width W x Depth D x Height H (mm)  520×538×700  Total Load Capacity (kg)  80  Material (Frame)  Steel (epoxy resin powder coating)  Color  White  Material (Top Plate)  Wood (melamine decorative board) 
    Rating:
    100%
    from S$139.90
    Min. 5 days
  3. Printer stand (100-LPS013M)
    Sanwa Direct Printer stand (100-LPS013M)
    Load-bearing top plate: 40 kg Shelf plate: 15 kg A robust stand. A wide top plate on which a large printer can be installed. Comes with casters that are convenient for small movements during maintenance. The middle shelf can be set in 5 stages and can be set according to the stored items.
    Assembly person  Top Plate Thickness (mm)  18  hex wrench included (mm)  Top Plate Width (mm)  520  Mass (kg)  About 12.6  Frame Color  Black  Time to Assemble  Half an hour  Instruction Manual  Japanese instruction manual available  How to Assemble  Knockdown assembly type  Adjuster  None  Suitable Tool  Slotted screwdriver, spanner, gloves  Length (mm)  Top plate: 520  Caster  Yes  Color (Top Plate)  grain  Color  grain 
    Rating:
    100%
    from S$139.90
    Min. 5 days
  4. Printer Stand
    Sanwa Direct Printer Stand
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Mass (kg)  14.9  Total Load Capacity (kg)  50  Dimensions, Width W x Depth D x Height H (mm)  600×500×700  Material (Frame)  Steel  Color  White  Material (Top Plate)  Wood (with PVC sheet) 
    from S$279.90
    Min. 12 days
  5. Printer Stand
    Sanwa Direct Printer Stand
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Mass (kg)  3.6  Total Load Capacity (kg)  35  Dimensions, Width W x Depth D x Height H (mm)  480×400×78  Material  Wood (melamine decorative board) 
    from S$77.99
    Min. 5 days
  6. Printer rack
    Nakabayashi (LOAS) Printer rack
    Rack with a top plate load capacity of 100 kg and compatible with large laser printers and inkjet printers. With OA tap and large hook convenient for cable storage. When moving, it can be moved quietly and easily because it uses large rubber casters. Products conforming to the Law on Promoting Gr... Read More
    Maximum Load of Top Plate (kg)  100  Mass (kg)  17.4  Length (mm)  600  Width (mm)  600  Height (mm)  700  Act on Promoting Green Procurement  Conformity  Specification  Knockdown assembly type 
    from S$489.90
    Min. 6 days
  7. Printer station
    Sanwa Direct Printer station
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Material  (Main unit) MDF, (Box) PP  Total Load Capacity (kg)  20  Mass (kg)  Dimensions, Width W x Depth D x Height H (mm)  500×410×150  Packing  Finished product 
    from S$129.90
    Min. 5 days
  8. Printer stand
    Nike Printer stand
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Length (mm)  500  Width (mm)  600 
    from S$219.90
    Min. 15 days
  9. 600x485x550-750mm Rolling Printer Stand
    ESCO 600x485x550-750mm Rolling Printer Stand
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Act on Promoting Green Procurement  Conformity  Esco Part No.  EA954HE-30 
    from S$379.90
    Min. 6 days
  10. Printer Stand
    SANWA SUPPLY Printer Stand
    A cart that stores devices such as multifunction printers under a desk. With a handle, it is easy to move back and forth. An inkjet multifunction device can be installed under a desk. * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the d... Read More
    Mass (kg)  3.5  Total Load Capacity (kg)  40  Dimensions, Width W x Depth D x Height H (mm)  480×445×78  Material  Top / wooden (melamine decorative board) 
    from S$58.99
    Min. 4 days
  11. Printer Stand
    SANWA SUPPLY Printer Stand
    A steel printer stand that also supports large laser printers. * We do not deliver to private homes (detached houses / apartments). * Please note the following points for products shipped directly from the furniture manufacturer. * We cannot accept changes, cancellations, returns, or exchanges af... Read More
    Material  Steel (epoxy resin powder coating) 
    Rating:
    100%
    from S$109.90
    Min. 4 days
  12. Printer Stand (100-LPS012M)
    Sanwa Direct Printer Stand (100-LPS012M)
    Load-bearing top plate: 40 kg Shelf plate: 15 kg A robust stand. A wide top plate on which a large printer can be installed. Comes with casters that are convenient for small movements during maintenance. Height 355 mm that can be stored under the desk
    Assembly person  Top Plate Thickness (mm)  18  Time to Assemble  20 min  hex wrench included (mm)  Opening Width (mm)  520  Top Plate Width (mm)  520  Total Load Capacity (kg)  About 55  Frame Color  Black  Instruction Manual  Japanese instruction manual available  How to Assemble  Knockdown assembly type  Adjuster  None  Suitable Tool  Slotted screwdriver, spanner, gloves  Length (mm)  Top plate: 520  Caster  Yes  Color  grain  Color (Top Plate)  grain 
    from S$129.90
    Min. 5 days
  13. Printer Stand
    Sanwa Direct Printer Stand
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Mass (kg)  22.8  Dimensions, Width W x Depth D x Height H (mm)  520×520×700  Total Load Capacity (kg)  70  Color  Light gray  Material (Top Plate)  Wood (melamine decorative board)  Material (Frame)  Wood (melamine decorative board) 
    Rating:
    20%
    from S$219.90
    Min. 5 days
  14. Printer Stand
    SANWA SUPPLY Printer Stand
    A steel printer stand that also supports large laser printers. Equipment such as laser printers can be stored under the desk. With a handle, it is easy to move back and forth. * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimension... Read More
    Mass (kg)  3.8  Top Panel Dimensions, Width W x Depth D (mm)  500×500  Dimensions, Width W x Depth D x Height H (mm)  500×535×90  Uniform Load Capacity (kg)  60  Material  Steel (Epoxy powder coating)  Color  White  Specification  With casters 
    from S$139.90
    Min. 2 days
  15. Printer stand
    Sanwa Direct Printer stand
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Dimensions, Width W x Depth D x Height H (mm)  520×538×350  Total Load Capacity (kg)  55  Mass (kg)  8.3  Material (Frame)  Steel (epoxy resin powder coating)  Color  White  Material (Top Plate)  Wood (melamine decorative board) 
    from S$139.90
    Min. 5 days
  16. Printer rack
    Nakabayashi (LOAS) Printer rack
    Printer rack that matches the height of the desk Lower slide type shelf Knockdown assembly type Green Purchasing Law compliant product, low formaldehyde top plate adopted * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of ... Read More
    Mass of Main Unit (kg)  18.8  Maximum Load of Top Plate (kg)  40  Dimensions, Width W x Depth D x Height H (mm)  600×600×700  Act on Promoting Green Procurement  Conformity  Color  Top plate, support: White gray 
    Rating:
    80%
    from S$299.90
    Min. 2 days
  17. Printer station
    SANWA SUPPLY Printer station
    It is a printer stand that allows you to operate the printer in an easy-to-use position on your desk and make effective use of the bottom of the printer. Clamps can be fixed to prevent the printer stand from falling. * Two clamps are included and can be attached to any two locations. A middle she... Read More
    Included Accessories  2 sets of mounting clamps  Total Load Capacity (kg)  20  Mass (kg)  4.3  Dimensions, Width W x Depth D x Height H (mm)  500×370×167  Material  Steel (epoxy resin powder coating) 
    Rating:
    100%
    from S$109.90
    Min. 4 days
  18. Printer station
    Sanwa Direct Printer station
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Total Load Capacity (kg)  10  Color  Black  Material  PS 
    Rating:
    80%
    from S$77.99
    Min. 5 days
  19. Inkjet Printer Stands
    Sanwa Direct Inkjet Printer Stands
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Material  Particleboard (with PVC sheet)  Color  grain 
    from S$109.90
    Min. 5 days
  20. Printer Stand
    Sanwa Direct Printer Stand
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Total Load Capacity (kg)  35  Mass (kg)  4.6  Dimensions, Width W x Depth D x Height H (mm)  500×540×78  Color  White  Material  Wood (melamine decorative board) 
    from S$87.99
    Min. 5 days
  21. Printer rack
    Nakabayashi (LOAS) Printer rack
    Compact printer rack with casters for A4 laser printer Knockdown assembly type Green Purchasing Law compliant product, low formaldehyde top plate adopted * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation ... Read More
    Maximum Load of Top Plate (kg)  30  Dimensions, Width W x Depth D x Height H (mm)  600×485×550  Mass of Main Unit (kg)  Act on Promoting Green Procurement  Conformity 
    Rating:
    100%
    from S$299.90
    Min. 6 days
  22. Printer station
    Sanwa Direct Printer station
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Total Load Capacity (kg)  10  Mass (kg)  2.2  Dimensions, Width W x Depth D x Height H (mm)  378×272×142  Color  Black  Packing  Finished product  Material  PS 
    from S$77.99
    Min. 5 days
  23. Printer station
    Sanwa Direct Printer station
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Mass (kg)  1.2  Total Load Capacity (kg)  10  Dimensions, Width W x Depth D x Height H (mm)  520×330×120  Material  ABS  Color  Black  Packing  Finished product 
    from S$46.99
    Min. 5 days
  24. Sub-table
    SANWA SUPPLY Sub-table
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    from S$189.90
    Min. 5 days
  25. Floor fixing bracket (for printer stand)
    SANWA SUPPLY Floor fixing bracket (for printer stand)
    Floor fixing bracket for printer stand. (For LPS-01T, LPS-T104N, LPS-T105N, LPS-T109) Remove the casters and attach them with the nuts for attaching the casters and the bolts for fixing the shelf board. Floor fixing bracket for laser printer stand. * Please note the following points for products ... Read More
    Dimensions, Width W x Depth D x Height H (mm)  45×74×94  Material  Steel (galvanized)  Mass (g)  234 
    from S$58.99
    Min. 4 days
  26. Adjuster
    SANWA SUPPLY Adjuster
    Please use it when you want to firmly fix the printer stand, etc. Adjuster screw diameter, M8 (P, 1.25) Adjuster for installation of printer stands, etc. * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation ... Read More
    Thread Size  M8 
    from S$24.99
    Min. 4 days
  27. Printer station
    Sanwa Direct Printer station
    * Please note the following points for products shipped directly from the furniture manufacturer.・ Measure the dimensions of the installation location and check if the product you ordered can be installed before ordering.・ We cannot accept changes, cancellations, returns or exchanges after orde... Read More
    Total Load Capacity (kg)  10  Mass (kg)  2.34  Dimensions, Width W x Depth D x Height H (mm)  490×350×76  Material  ABS  Color  Black  Packing  Finished product 
    from S$77.99
    Min. 5 days
  28. Printer stand
    SANWA SUPPLY Printer stand
    Equipment such as laser printers and inkjet multifunction devices can be stored under the desk. With a handle, it is easy to move back and forth. Comes with convenient casters that can be pulled out and used only when used. Easy assembly by simply inserting the casters. * Please note the followin... Read More
    Assembly person  Time to Assemble  20 min  Top Plate Thickness (mm)  25  Opening Width (mm)  400  Top Panel Dimensions, Width W x Depth D (mm)  400×400  Allowable Load (kg)  40kg  Adjuster  None  Caster  Yes  Suitable Tool  gloves 
    from S$88.99
    Min. 2 days
  29. Printer stand
    SANWA SUPPLY Printer stand
    With a door, you can blindfold stock items such as toner and paper. Since the cable port is provided on the back, you can use it close to the wall. With casters, you can easily move and maintain. <Caution> * The casters are not intended for long-distance travel. The height of the middle she... Read More
    Top Plate Thickness (mm)  15  Top Panel Dimensions, Width W x Depth D (mm)  500×1500  Dimensions, Width W x Depth D x Height H (mm)  500×500×700  Mass (kg)  About 24.3  Included Accessories  Assembly instructions, spanner  Adjuster  None  Color  White  Caster  Yes 
    from S$349.90
    Min. 4 days
  30. 500x370x167mm  Printer stand
    ESCO 500x370x167mm Printer stand
    Total Load Capacity (kg)  20  Mass (kg)  4.3  Opening Width (mm)  500  Dimension (mm)  500(W)×370(d)×167(H)  Material  Steel 
    from S$139.90
    Min. 5 days
  31. Printer stand  NC series
    Nakakin Printer stand NC series
    Comes with a shelf that can store spare PPC paper.
    Mass (kg)  11.6  Allowable Load (kg)  60 (40 for each stage)  effective diameter of top table (width x depth) (mm)  600×500  Dimensions, Width W x Depth D x Height H (mm)  600×500×300  As ONE Part Number  63-1827-86  Material  Steel  Color  White gray 
    from S$399.90
    Min. 4 days
  32. Printer Stand
    SANWA SUPPLY Printer Stand
    The size is W400 x D400, which fits perfectly in a small A4 laser printer. The H200 fits under your desk. The two-tiered shelves accommodate the printer in the upper tier and the paper in the lower tier, improving usability. Made of steel and durable. With casters, it is convenient for a little m... Read More
    Top Plate Thickness (mm)  18  Assembly person  Time to Assemble  20 min  hex wrench included (mm)  Opening Width (mm)  400  Top Panel Dimensions, Width W x Depth D (mm)  400×400  Allowable Load (kg)  80  Material  Steel + epoxy resin powder coating  Color (Frame)  White  Color (Top Plate)  White  Color  White  Adjuster  Yes  Caster  Yes  Suitable Tool  gloves 
    from S$269.90
    Min. 4 days
  33. Printer stand
    SANWA SUPPLY Printer stand
    Features / Specifications If you install it next to the desk, you can take the printed paper without leaving your seat. On the back, there are cable ports on the top and bottom for easy wiring. The height of the middle shelf can be changed according to the cartridge and paper size. ■ Cable port s... Read More
    Total Load Capacity (kg)  100  Assembly person  Time to Assemble  40 minutes  Material  Cabinet / shelf / wooden melamine veneer  Frame Color  Light gray  Color  Light gray  Color (Top Plate)  Light gray  Suitable Tool  Phillips screwdriver, gloves 
    from S$269.90
    Min. 4 days
  34. Printer stand
    SANWA SUPPLY Printer stand
    The size is W400 x D400, which fits perfectly in a small A4 laser printer. The height can be set in two stages, H700 and H720. The middle shelf can be set in 3 stages with P100 mm according to the carriage and paper size. Made of steel and durable. Comes with an adjuster. The optional floor fixin... Read More
    Top Plate Thickness (mm)  18  Assembly person  hex wrench included (mm)  Opening Width (mm)  400  Top Panel Dimensions, Width W x Depth D (mm)  400×400  Allowable Load (kg)  80  Included Accessories  Adjuster  Time to Assemble  Half an hour  Material  Steel + epoxy resin powder coating  Color (Top Plate)  White  Color  White  Frame Color  White  Caster  Yes  Suitable Tool  gloves 
    from S$299.90
    Min. 4 days
  35. Printer stand
    SANWA SUPPLY Printer stand
    Features / Specifications Optimal size for A3 laser printers. On the back, there are cable ports on the top and bottom for easy wiring. The height of the middle shelf can be changed according to the cartridge and paper size. ■ Cable port size: 150 x 60 mm ■ Size: W600 x D600 x H700 mm, weight 34 ... Read More
    Total Load Capacity (kg)  100  Assembly person  Time to Assemble  40 minutes  Material  Cabinet / shelf / wooden melamine veneer  Color (Top Plate)  Light gray  Frame Color  Light gray  Color  Light gray  Suitable Tool  Phillips screwdriver, gloves 
    from S$329.90
    Min. 4 days
  36. Printer stand
    SANWA SUPPLY Printer stand
    The middle shelf has two middle shelves on which peripheral devices can be installed, and can store cartridges, paper, buffers, etc. Strength up with a special frame structure With a special structure that adds an inner frame to the side frame, the back frame that gets in the way when installing ... Read More
    Assembly person  Time to Assemble  Half an hour  Color (Top Plate)  Light gray  Frame Color  Light gray  Color  Light gray  Suitable Tool  gloves 
    from S$239.90
    Min. 4 days
  37. 500x535x  90mm  Printer stand (with casters)
    ESCO 500x535x 90mm Printer stand (with casters)
    * Customer assembly
    Mass (kg)  3.8  Dimensions, Width W x Depth D x Height H (mm)  500×535×90  Total Load Capacity (kg)  60 (equal load capacity) 
    from S$179.90
    Min. 5 days
  38. Printer wagon (with door)
    ESCO Printer wagon (with door)
    A wooden printer stand with a door that looks neat. A cable port is provided on the back of the stand, so you can use it close to the wall. There is a tap storage space on the back for neat wiring. Comes with casters for easy movement and maintenance work. * Caster is not intended for long-distan... Read More
    from S$429.90
    Min. 2 days
  39. Dedicated cabinet
    NEC Dedicated cabinet
    from S$499.90
    Min. 10 days
  40. Printer stand
    SANWA SUPPLY Printer stand
    A large laser printer stand that can efficiently store peripherals and manuals. HUB etc. can be neatly stored in the peripheral device storage shelf. The back panel of the storage shelf is removable, so maintenance is easy. Equipped with a manual holder on the back of the shelf board. Thin manual... Read More
    Total Load Capacity (kg)  100  Assembly person  Time to Assemble  Half an hour  Frame Color  Light gray  Suitable Tool  gloves 
    from S$329.90
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 65

Set Ascending Direction