All Category

Hanging Hardware

Other Related Pages

View : Grid List
Filter

34 Item(s)

Set Ascending Direction
  1. Ring pull
    TRUSCO Ring pull
    Since it is an embedded type, it does not get in the way of the installation surface. The ring part is raised only when you want to use it, and when not in use, it fits in the embedded part so it does not get in the way. Attached to the wall / floor / inspection port as a puller. For ship decks, ... Read More
    Dimension t (mm) 
    Rating:
    90%
    from S$9.59
    Min. 2 days
  2. Stainless steel hanger plate 26mm × 13mm
    Mizumoto Machine Mfg. Stainless steel hanger plate 26mm × 13mm
    It can be used in combination by inserting a D ring etc. in the central bent part. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D (mm)  1.5  Dimension W (mm)  13  Dimension L1 (mm)  15.5  Dimension L (mm)  26  Dimension d (mm)  3.2  Mass (g)  Dimension h (mm)  Dimension H (mm)  6.5  Included Accessories  Stainless steel countersunk screw 
    from S$2.59
    Min. 2 days
  3. Stainless steel holding bracket 50mm × 25. 2mm
    Mizumoto Machine Mfg. Stainless steel holding bracket 50mm × 25. 2mm
    Used as a C-shaped retainer for body door fasteners. Used as a fastener when the rear door of a box-type / container-type truck is opened
    Trusco Part No.  849-3358  Dimension L1 (mm)  50  Mass (g)  23  Dimension W (mm)  25.2  Dimension d (mm)  Dimension D (mm)  Dimension L2 (mm)  31  Dimension H (mm)  10  Dimension T (mm)  2.5 
    from S$2.99
    Min. 2 days
  4. Stainless steel hanger unit SQ type 38mm × 38mm
    Mizumoto Machine Mfg. Stainless steel hanger unit SQ type 38mm × 38mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D1 (mm)  1.5  Dimension W1 (mm)  19  Dimension B (mm)  21  Dimension L1 (mm)  22.5  Dimension d (mm)  3.5  Dimension L (mm)  38  Dimension W (mm)  38  Dimension A (mm)  39  Mass (g)  39  Dimension D2 (mm)  Dimension H (mm)  8.5  Trusco Part No.  848-9728  Included Accessories  Stainless steel countersunk screw 
    from S$8.99
    Min. 2 days
  5. Stainless steel hanger plate 28mm × 28mm
    Mizumoto Machine Mfg. Stainless steel hanger plate 28mm × 28mm
    It can be used in combination by inserting a D ring etc. in the central bent part. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D (mm)  1.5  Mass (g)  10  Dimension W1 (mm)  14  Dimension L1 (mm)  17  Dimension W (mm)  28  Dimension L (mm)  28  Dimension d (mm)  3.2  Dimension h (mm)  Dimension H (mm)  7.5  Included Accessories  Stainless steel countersunk screw 
    Rating:
    100%
    from S$2.99
    Min. 2 days
  6. Stainless steel holding bracket 55mm × 25mm
    Mizumoto Machine Mfg. Stainless steel holding bracket 55mm × 25mm
    Used as a C-shaped retainer for body door fasteners. Used as a fastener when the rear door of a box-type / container-type truck is opened
    Trusco Part No.  849-3357  Dimension W (mm)  25  Dimension D (mm)  Mass (g)  30  Dimension L1 (mm)  55  Dimension T (mm)  Dimension d (mm)  4.6  Dimension L2 (mm)  35.5  Dimension H (mm)  10 
    from S$3.49
    Min. 5 days
  7. Stainless steel hanger plate 36mm × 18mm
    Mizumoto Machine Mfg. Stainless steel hanger plate 36mm × 18mm
    It can be used in combination by inserting a D ring etc. in the central bent part. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D (mm)  1.5  Dimension W (mm)  18  Dimension L1 (mm)  21  Dimension d (mm)  3.2  Dimension L (mm)  36  Dimension h (mm)  Dimension H (mm)  7.5  Mass (g)  Included Accessories  Stainless steel countersunk screw 
    Rating:
    100%
    from S$2.69
    Min. 2 days
  8. Stainless steel hanger unit D type 43mm × 43mm
    Mizumoto Machine Mfg. Stainless steel hanger unit D type 43mm × 43mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.15  Dimension H (mm)  11  Dimension D1 (mm)  2.0  Dimension W1 (mm)  21.5  Dimension L1 (mm)  26  Dimension d (mm)  4.2  Dimension B (mm)  42  Dimension W (mm)  43  Dimension L (mm)  43  Dimension A (mm)  45  Dimension D2 (mm)  Mass (g)  71  Trusco Part No.  848-9717  Included Accessories  Stainless steel countersunk screw 
    Rating:
    100%
    from S$13.99
    Min. 5 days
  9. Stainless steel hanger unit D type 53mm × 53mm
    Mizumoto Machine Mfg. Stainless steel hanger unit D type 53mm × 53mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.15  Dimension H (mm)  11  Dimension D1 (mm)  2.0  Dimension W1 (mm)  26.5  Dimension L1 (mm)  31  Dimension d (mm)  4.2  Dimension B (mm)  52  Dimension W (mm)  53  Dimension L (mm)  53  Dimension A (mm)  55  Dimension D2 (mm)  Trusco Part No.  848-9719  Mass (g)  93  Included Accessories  Stainless steel countersunk screw 
    Rating:
    100%
    from S$14.99
    Min. 3 days
  10. Stainless steel hanger plate 36mm × 23mm
    Mizumoto Machine Mfg. Stainless steel hanger plate 36mm × 23mm
    It can be used in combination by inserting a D ring etc. in the central bent part. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D (mm)  1.5  Mass (g)  10  Dimension L1 (mm)  21  Dimension W (mm)  23  Dimension L (mm)  36  Dimension d (mm)  4.2  Dimension h (mm)  Dimension H (mm)  7.5  Included Accessories  Stainless steel countersunk screw 
    from S$2.99
    Min. 3 days
  11. Stainless steel hanger unit SQ type 23mm × 36mm
    Mizumoto Machine Mfg. Stainless steel hanger unit SQ type 23mm × 36mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D1 (mm)  1.5  Dimension B (mm)  15  Dimension L1 (mm)  21  Dimension W (mm)  23  Mass (g)  24  Dimension A (mm)  26  Dimension L (mm)  36  Dimension d (mm)  4.2  Dimension D2 (mm)  Dimension H (mm)  7.5  Trusco Part No.  848-9726  Included Accessories  Stainless steel countersunk screw 
    from S$6.19
    Min. 2 days
  12. 32x47.0mm hanger plate (made of stainless steel)
    ESCO 32x47.0mm hanger plate (made of stainless steel)
    Esco Part No.  EA951DZ-7 
    from S$6.69
    Min. 6 days
  13. Stainless steel hanger unit SQ type 28mm × 28mm
    Mizumoto Machine Mfg. Stainless steel hanger unit SQ type 28mm × 28mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D1 (mm)  1.5  Dimension W1 (mm)  14  Dimension L1 (mm)  17  Dimension B (mm)  18  Mass (g)  27  Dimension W (mm)  28  Dimension L (mm)  28  Dimension d (mm)  3.2  Dimension A (mm)  32  Dimension D2 (mm)  Dimension H (mm)  7.5  Trusco Part No.  848-9727  Included Accessories  Stainless steel countersunk screw 
    from S$6.29
    Min. 3 days
  14. Stainless steel hanger unit SQ type 43mm × 43mm
    Mizumoto Machine Mfg. Stainless steel hanger unit SQ type 43mm × 43mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.15  Dimension H (mm)  11  Dimension D1 (mm)  2.0  Dimension W1 (mm)  21.5  Dimension B (mm)  25  Dimension L1 (mm)  26  Dimension d (mm)  4.2  Dimension W (mm)  43  Dimension L (mm)  43  Dimension A (mm)  47  Dimension D2 (mm)  Mass (g)  68  Trusco Part No.  848-9729  Included Accessories  Stainless steel countersunk screw 
    from S$12.99
    Min. 2 days
  15. Stainless steel hanger plate 33mm × 33mm
    Mizumoto Machine Mfg. Stainless steel hanger plate 33mm × 33mm
    It can be used in combination by inserting a D ring etc. in the central bent part. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D (mm)  1.5  Mass (g)  14  Dimension W1 (mm)  16.5  Dimension L1 (mm)  20  Dimension d (mm)  3.5  Dimension W (mm)  33  Dimension L (mm)  33  Dimension h (mm)  Dimension H (mm)  7.5  Included Accessories  Stainless steel countersunk screw 
    from S$3.59
    Min. 3 days
  16. Stainless steel hanger plate 48mm × 48mm
    Mizumoto Machine Mfg. Stainless steel hanger plate 48mm × 48mm
    It can be used in combination by inserting a D ring etc. in the central bent part. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.15  Dimension H (mm)  11  Dimension D (mm)  Dimension W1 (mm)  24  Dimension L1 (mm)  28.5  Mass (g)  39  Dimension d (mm)  4.2  Dimension L (mm)  48  Dimension W (mm)  48  Dimension h (mm)  Included Accessories  Stainless steel countersunk screw 
    from S$5.99
    Min. 3 days
  17. Stainless steel hanger unit SQ type 18mm × 36mm
    Mizumoto Machine Mfg. Stainless steel hanger unit SQ type 18mm × 36mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D1 (mm)  1.5  Dimension B (mm)  12  Dimension W (mm)  18  Mass (g)  19  Dimension A (mm)  20  Dimension L1 (mm)  21  Dimension d (mm)  3.2  Dimension L (mm)  36  Dimension D2 (mm)  Dimension H (mm)  7.5  Trusco Part No.  848-9725  Included Accessories  Stainless steel countersunk screw 
    from S$5.59
    Min. 3 days
  18. Stainless steel hanger plate 38mm × 38mm
    Mizumoto Machine Mfg. Stainless steel hanger plate 38mm × 38mm
    It can be used in combination by inserting a D ring etc. in the central bent part. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D (mm)  1.5  Dimension W1 (mm)  19  Mass (g)  19  Dimension L1 (mm)  22.5  Dimension d (mm)  3.5  Dimension W (mm)  38  Dimension L (mm)  38  Dimension h (mm)  Dimension H (mm)  8.5  Included Accessories  Stainless steel countersunk screw 
    from S$3.89
    Min. 3 days
  19. Stainless steel hanger unit D type 33mm × 33mm
    Mizumoto Machine Mfg. Stainless steel hanger unit D type 33mm × 33mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D1 (mm)  1.5  Dimension W1 (mm)  16.5  Dimension L1 (mm)  20  Dimension d (mm)  3.5  Dimension W (mm)  33  Dimension L (mm)  33  Mass (g)  37  Dimension B (mm)  37  Dimension A (mm)  40  Dimension D2 (mm)  Dimension H (mm)  7.5  Trusco Part No.  848-9715  Included Accessories  Stainless steel countersunk screw 
    from S$8.89
    Min. 2 days
  20. Stainless steel hanger unit TR type 28mm × 28mm
    Mizumoto Machine Mfg. Stainless steel hanger unit TR type 28mm × 28mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, and ropes
    Working load (kN)  0.10  Dimension D1 (mm)  1.5  Dimension W1 (mm)  14  Dimension L1 (mm)  17  Dimension W (mm)  28  Dimension L (mm)  28  Mass (g)  29  Dimension d (mm)  3.2  Dimension A (mm)  35  Dimension D2 (mm)  Dimension H (mm)  7.5  Trusco Part No.  848-9720  Included Accessories  Stainless steel countersunk screw 
    from S$6.79
    Min. 2 days
  21. Stainless steel hanger unit D type 48mm × 48mm
    Mizumoto Machine Mfg. Stainless steel hanger unit D type 48mm × 48mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.15  Dimension H (mm)  11  Dimension D1 (mm)  2.0  Dimension W1 (mm)  24  Dimension L1 (mm)  28.5  Dimension d (mm)  4.2  Dimension B (mm)  47  Dimension W (mm)  48  Dimension L (mm)  48  Dimension A (mm)  50  Dimension D2 (mm)  Mass (g)  82  Trusco Part No.  848-9718  Included Accessories  Stainless steel countersunk screw 
    from S$13.99
    Min. 4 days
  22. Stainless steel hanger unit SQ type 13mm × 26mm
    Mizumoto Machine Mfg. Stainless steel hanger unit SQ type 13mm × 26mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.10  Dimension D1 (mm)  1.5  Dimension W (mm)  13  Dimension A (mm)  15  Dimension L1 (mm)  15.5  Dimension L (mm)  26  Dimension d (mm)  3.2  Dimension D2 (mm)  Dimension H (mm)  6.5  Trusco Part No.  848-9724  Dimension B (mm)  Mass (g)  Included Accessories  Stainless steel countersunk screw 
    from S$5.29
    Min. 3 days
  23. Stainless steel hanger unit TR type 43mm × 43mm
    Mizumoto Machine Mfg. Stainless steel hanger unit TR type 43mm × 43mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, and ropes
    Working load (kN)  0.15  Dimension H (mm)  11  Dimension D1 (mm)  Dimension W1 (mm)  21.5  Dimension L1 (mm)  26  Dimension d (mm)  4.2  Dimension L (mm)  43  Dimension W (mm)  43  Dimension A (mm)  45  Dimension D2 (mm)  Trusco Part No.  848-9723  Mass (g)  96  Included Accessories  Stainless steel countersunk screw 
    from S$14.99
    Min. 32 days
  24. 22x36.5mm hanger plate (made of stainless steel)
    ESCO 22x36.5mm hanger plate (made of stainless steel)
    Esco Part No.  EA951DZ-2 
    from S$5.99
    Min. 6 days
  25. Stainless steel hanger plate 43mm × 43mm
    Mizumoto Machine Mfg. Stainless steel hanger plate 43mm × 43mm
    It can be used in combination by inserting a D ring etc. in the central bent part. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.15  Dimension H (mm)  11  Dimension D (mm)  Dimension W1 (mm)  21.5  Dimension L1 (mm)  26  Mass (g)  33  Dimension d (mm)  4.2  Dimension W (mm)  43  Dimension L (mm)  43  Dimension h (mm)  Included Accessories  Stainless steel countersunk screw 
    from S$5.59
    Min. 3 days
  26. Hanger unit IQ type
    ACE Hanger unit IQ type
    from S$4.99
    Min. 5 days
  27. Hanger unit ID type
    ACE Hanger unit ID type
    from S$5.89
    Min. 5 days
  28. Stainless steel hanger unit + triangular type
    Geo. Prince Takeshita Stainless steel hanger unit + triangular type
    Made of stainless steel, it has excellent corrosion resistance and heat resistance. * Mounting screws are not included. Please prepare separately.
    Dimension t1 (mm)  1.5  Allowable load (N [kgf])  98  RoHS directive (corresponding to 10 substances)  Correspondence  Finish  Electrolytic polishing  Recommended Screw  M3 countersunk head screw  Material  Stainless steel (SUS-304) 
    from S$4.99
    Min. 7 days
  29. Stainless steel hanger plate 53mm × 53mm
    Mizumoto Machine Mfg. Stainless steel hanger plate 53mm × 53mm
    It can be used in combination by inserting a D ring etc. in the central bent part. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, ropes, etc.
    Working load (kN)  0.15  Dimension H (mm)  11  Dimension D (mm)  Dimension W1 (mm)  26.5  Dimension L1 (mm)  31  Dimension d (mm)  4.2  Mass (g)  47  Dimension L (mm)  53  Dimension W (mm)  53  Dimension h (mm)  Included Accessories  Stainless steel countersunk screw 
    from S$6.79
    Min. 3 days
  30. Stainless steel hanger unit TR type 33mm × 33mm
    Mizumoto Machine Mfg. Stainless steel hanger unit TR type 33mm × 33mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, and ropes
    Working load (kN)  0.10  Dimension D1 (mm)  1.5  Dimension W1 (mm)  16.5  Dimension L1 (mm)  20  Dimension d (mm)  3.5  Dimension W (mm)  33  Dimension L (mm)  33  Mass (g)  35  Dimension A (mm)  40  Dimension D2 (mm)  Dimension H (mm)  7.5  Trusco Part No.  848-9721  Included Accessories  Stainless steel countersunk screw 
    from S$6.79
    Min. 3 days
  31. Hanger unit IR type
    ACE Hanger unit IR type
    from S$6.29
    Min. 5 days
  32. Stainless steel hanger unit HF type 18mm × 36mm
    Mizumoto Machine Mfg. Stainless steel hanger unit HF type 18mm × 36mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, and ropes
    Working load (kN)  0.10  Dimension D (mm)  1.5  Dimension W (mm)  18  Dimension L1 (mm)  21  Dimension d (mm)  3.2  Dimension W2 (mm)  35  Dimension L (mm)  36  Dimension D2 (mm)  Included Accessories  Stainless steel countersunk screw 
    from S$7.49
    Min. 3 days
  33. Stainless Steel Hanger Unit Square
    Geo. Prince Takeshita Stainless Steel Hanger Unit Square
    Made of stainless steel, it has excellent corrosion resistance and heat resistance. * Mounting screws are not included. Please prepare separately.
    Allowable load (N [kgf])  98  RoHS directive (corresponding to 10 substances)  Correspondence  Finish  Electrolytic polishing  Material  Stainless steel (SUS-304) 
    from S$3.89
    Min. 6 days
  34. Stainless steel hanger unit TR type 38mm × 38mm
    Mizumoto Machine Mfg. Stainless steel hanger unit TR type 38mm × 38mm
    Since the ring part collapses, it does not get in the way when not in use. Installed on walls, floors, pillars, etc., as terminal fittings for chains, wires, and ropes
    Working load (kN)  0.10  Dimension D1 (mm)  1.5  Dimension W1 (mm)  19  Dimension L1 (mm)  22.5  Dimension d (mm)  3.5  Dimension L (mm)  38  Dimension W (mm)  38  Dimension A (mm)  45  Mass (g)  53  Dimension D2 (mm)  Dimension H (mm)  8.5  Trusco Part No.  848-9722  Included Accessories  Stainless steel countersunk screw 
    from S$9.69
    Min. 3 days
View : Grid List
Filter

34 Item(s)

Set Ascending Direction