All Category

Flush Bolt Keepers

View : Grid List
Filter

30 Item(s)

Set Ascending Direction
  1. Stainless steel
    Kumamoto Stainless steel
    To receive the French drop and the round drop
    Material  (Exterior part) SUS304  Finish  Barrel polishing  RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    88%
    from S$7.79
    Min. 2 days
  2. Tsubos with cover
    BEST (Hardware) Tsubos with cover
    Received the fall of France and the fall of Maru
    Finish  Hairline 
    from S$9.59
    Min. 2 days
  3. Drop
    SYS (Shibutani) Drop
    Finish  Parel polishing  Material  Stainless steel 
    Rating:
    70%
    from S$12.99
    Min. 2 days
  4. For stainless steel drop seat 12Φ
    OKADA SOSHOKU KANAMONO For stainless steel drop seat 12Φ
    Made of stainless steel (SUS304) with excellent corrosion resistance, rust resistance, and abrasion resistance. Embed in the floor and receive the shaft of the drop.
    Mass (g)  27  RoHS directive (corresponding to 10 substances)  Correspondence  Material / Finish  Stainless steel 
    from S$10.99
    Min. 2 days
  5. Dropout
    Nakanishi Industrial Dropout
    Finish  Hairline  Material  Stainless steel 
    Rating:
    100%
    from S$10.99
    Min. 2 days
  6. Stainless steel upper tray
    Kumamoto Stainless steel upper tray
    To receive the loss of France
    Material  (Exterior part) SUS304  RoHS directive (corresponding to 10 substances)  Correspondence  Finish  HL 
    Rating:
    100%
    from S$5.09
    Min. 2 days
  7. Lower point
    Nakanishi Industrial Lower point
    One-piece aperture
    Finish  Barrel polishing  Material  Stainless steel 
    from S$6.49
    Min. 2 days
  8. Stainless steel bottom anchor For anchor
    Kumamoto Stainless steel bottom anchor For anchor
    To receive the loss of France
    Material  (Exterior part) SUS304  RoHS directive (corresponding to 10 substances)  Correspondence  Finish  HL 
    Rating:
    90%
    from S$5.29
    Min. 2 days
  9. For drop receiver 16Φ
    OKADA SOSHOKU KANAMONO For drop receiver 16Φ
    Mass (g)  37  RoHS directive (corresponding to 10 substances)  Correspondence  Material / Finish  Steel / Uniqlo 
    Rating:
    100%
    from S$8.89
    Min. 2 days
  10. For stainless steel lower receiving screw
    Kumamoto For stainless steel lower receiving screw
    To receive the loss of France
    Material  (Exterior part) SUS304  RoHS directive (corresponding to 10 substances)  Correspondence  Finish  HL 
    from S$5.09
    Min. 2 days
  11. Dropper (upper / lower tsubo)
    SYS (Shibutani) Dropper (upper / lower tsubo)
    Finish  Electrolytic polishing  Material  Stainless steel 
    from S$4.99
    Min. 2 days
  12. Stainless drop seat 16Φ
    OKADA SOSHOKU KANAMONO Stainless drop seat 16Φ
    Made of stainless steel (SUS304) with excellent corrosion resistance, rust resistance, and abrasion resistance. Embed in the floor and receive the shaft of the drop.
    Mass (g)  40  RoHS directive (corresponding to 10 substances)  Correspondence  Material / Finish  Stainless steel 
    from S$19.99
    Min. 2 days
  13. Drop receptacle (Shimotsubo)
    SYS (Shibutani) Drop receptacle (Shimotsubo)
    from S$4.49
    Min. 2 days
  14. Lower point
    Nakanishi Industrial Lower point
    One-piece aperture One-touch mounting (no screws required) * Applicable plate thickness 1.5 to 2.0 mm
    Finish  Barrel polishing  Material  Stainless steel 
    from S$4.99
    Min. 2 days
  15. 300mm / 11mm hole drop receiver (made of stainless steel)
    ESCO 300mm / 11mm hole drop receiver (made of stainless steel)
    Esco Part No.  EA951LP-0 
    from S$19.99
    Min. 2 days
  16. Lower point
    Nakanishi Industrial Lower point
    Material  Zinc die casting  Finish  Satellite chrome 
    from S$9.99
    Min. 6 days
  17. Lower point
    Nakanishi Industrial Lower point
    Finish  Barrel polishing  Material  Stainless steel 
    from S$5.89
    Min. 6 days
  18. Drop receptacle (Kamitsubo)
    SYS (Shibutani) Drop receptacle (Kamitsubo)
    Finish  Shot plast  Material  Stainless steel 
    from S$6.49
    Min. 2 days
  19. Upper point
    Nakanishi Industrial Upper point
    One-piece aperture
    Finish  Barrel polishing  Material  Stainless steel 
    from S$5.89
    Min. 6 days
  20. Upper point
    Nakanishi Industrial Upper point
    By applying resin parts inside the acupuncture points, the rattling of the rod rod is reduced. (When using PIP-L / PIP-LM) One-touch mounting (no screws required) * Applicable plate thickness 1.5 to 2.0 mm
    Finish  Barrel polishing  Material  Stainless steel 
    from S$8.59
    Min. 6 days
  21. Upper point
    Nakanishi Industrial Upper point
    Finish  Barrel polishing  Material  Stainless steel 
    from S$5.89
    Min. 6 days
  22. Cap guide
    Nakanishi Industrial Cap guide
    Finish  Electrolytic polishing  Material  Stainless steel 
    from S$13.99
    Min. 6 days
  23. Cap guide
    Nakanishi Industrial Cap guide
    Material  Resin  Finish  White 
    from S$3.29
    Min. 6 days
  24. Long for drop seat 16Φ
    OKADA SOSHOKU KANAMONO Long for drop seat 16Φ
    Comes with a drop catch, bolt and nut. Attach to the partition pole to stop the movement of the pole.
    Mass (g)  113  Material / Finish  Steel / galvanized 
    from S$17.99
    Min. 4 days
  25. Upper point
    Nakanishi Industrial Upper point
    With slope
    Material  Zinc die casting  Finish  Satellite chrome 
    from S$9.99
    Min. 6 days
  26. Top and bottom point
    Nakanishi Industrial Top and bottom point
    One-touch mounting (no screws required) * Applicable plate thickness 1.5 to 2.3 mm
    Finish  Barrel polishing  Material  Stainless steel 
    from S$4.39
    Min. 6 days
  27. Upper point
    Nakanishi Industrial Upper point
    By applying resin parts inside the acupuncture points, the rattling of the rod rod is reduced. (When using PIP-L / PIP-LM)
    Finish  Barrel polishing  Material  Stainless steel 
    from S$8.29
    Min. 6 days
  28. Gate Drop Bolt Socket Stainless Steel
    MonotaRO Gate Drop Bolt Socket Stainless Steel
    To receive the whole drop and the French drop * Do not use for any other purpose.
    Finish  Electrolytic polishing  Material  Stainless steel (SUS304) 
    Rating:
    96%
    from S$3.69
    Min. 2 days
  29. Upper point
    Nakanishi Industrial Upper point
    One-piece aperture One-touch mounting (no screws required) * Applicable plate thickness 1.5 to 2.0 mm
    Finish  Barrel polishing  Material  Stainless steel 
    Discontinued
  30. French drop tsubo
    ATOM LIVINTECH French drop tsubo
    It is a tsubo support for dropping France used for the floor. Since it is a double cylinder, you can easily remove the dust that has accumulated inside. This is useful when the floor is concrete, tiled or carpeted. Wooden door for indoor use in general housing * Cannot be used in the bathroom. * ... Read More
    Dimensions, Diameter x Height H (Φmm x mm)  20×28 
    Rating:
    100%
    Discontinued
View : Grid List
Filter

30 Item(s)

Set Ascending Direction