All Category

Other End Mills

Other Related Pages

View : Grid List
Filter

Items 1 - 40 of 1124

Set Ascending Direction
  1. Radiuscutter
    Mitsubishi Materials Radiuscutter
    Radius cutter for high feed. Stable cutting is possible with a strong tip clamp. Coolant holes are standard equipment on both urban and shank types.
    from S$339.90
    Min. 4 days
  2. Throwaway end mill
    Mitsubishi Materials Throwaway end mill
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$379.90
    Min. 5 days
  3. Corner Lounging Cutter
    SANKO MFG Corner Lounging Cutter
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Corner Rounding Cutter Radius  +0.03~0  Dimension Tolerance (mm)  0~-0.03  Helix Angle  Straight blade 
    Rating:
    80%
    from S$74.99
    Min. 2 days
  4. Center chamfering end mill
    SANKO MFG Center chamfering end mill
    Since the outer diameter and shank have the same diameter, work interference can be prevented. It can be used for a wide range of purposes. Center fir processing, countersunk chamfering, chamfering, V-grooving, side finishing * For separately shipped products, if you order by cash on delivery, it... Read More
    Outer Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Tip Angle (°)  90  Chamfer Angle  90° 
    Rating:
    100%
    from S$64.99
    Min. 2 days
  5. 2 Flute Diamond-coated End Mill
    WIDIN 2 Flute Diamond-coated End Mill
    Unlike DLC coat and TB coat, diamond coat has almost the same hardness as natural diamond. Supports processing of graphite, non-ferrous metals, composite materials, etc.
    Number of Tips  Helix Angle (°)  30  Coating  DIAMOND 
    from S$85.99
    Min. 2 days
  6. Small tip diameter corner lounge cutter
    SANKO MFG Small tip diameter corner lounge cutter
    Ideal for R chamfering of narrow grooves.
    Tolerance for Corner Rounding Cutter Radius  +0.03~0  Dimension Tolerance (mm)  0~-0.03  Number of Tips  Overall Length (mm)  50  Shank Diameter (Φmm)  Helix Angle  Straight blade 
    Rating:
    80%
    from S$74.99
    Min. 2 days
  7. MUGEN Coating Inner R Cutter MIR200
    NS TOOL MUGEN Coating Inner R Cutter MIR200
    Corner R can be easily processed. Infinite coating is used to dramatically improve durability. * If you order by cash on delivery, it may be shipped the next day or later.
    Helix Angle (°)  Number of Tips  Workable Hardness  Can process up to 55HRC  Material  Ultra-fine particle cemented carbide  R Tolerance (mm)  ±0.02 
    from S$85.99
    Min. 2 days
  8. Center Chamfering End Mill
    SANKO MFG Center Chamfering End Mill
    Since the outer diameter and shank have the same diameter, work interference can be prevented. It can be used for a wide range of purposes. * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Outer Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Tip Angle (°)  60  Chamfer Angle  60° 
    Rating:
    93%
    from S$64.99
    Min. 2 days
  9. Super high helicopter end mill for 3-flute aluminum
    SPEED TIGER Super high helicopter end mill for 3-flute aluminum
    Cutting edge damage prevention shape Good chip treatment during Z feed Mirror finish with high chip evacuation 50 ° twist with high machinability Emphasis on finish with 3 small gashes Low price non-coated, TB-coated, long (AUEL) with 3 blades
    Dimension Z (mm)  Number of Tips  Helix Angle (°)  50  Material  600Nano  Coating  Non-coated 
    from S$29.99
    Min. 2 days
  10. Carbide 2-flute center chamfering mill
    SANKO MFG Carbide 2-flute center chamfering mill
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Dimension Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Tip Angle (°)  90 
    from S$95.99
    Min. 2 days
  11. 2 Flute Diamond-coated Ball End Mill
    WIDIN 2 Flute Diamond-coated Ball End Mill
    Unlike DLC coat and TB coat, diamond coat has almost the same hardness as natural diamond. Supports processing of graphite, non-ferrous metals, composite materials, etc.
    Number of Tips  Helix Angle (°)  30  Coating  DIAMOND 
    from S$77.99
    Min. 13 days
  12. S coating corner lounging cutter
    SANKO MFG S coating corner lounging cutter
    It has an S coating. A cutter dedicated to R chamfering. * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Corner Rounding Cutter Radius  +0.03~0  Dimension Tolerance (mm)  0~-0.03  Surface Treatment  S coating  Helix Angle  Straight blade 
    from S$109.90
    Min. 2 days
  13. Carbide Multifunctional End Mill V Face Round 60 °
    THECUT Carbide Multifunctional End Mill V Face Round 60 °
    V-grooving, chamfering, center fir, drilling, side surface machining, etc. are possible with this one. The twist angle is 40 °, the sharpness is sharp, the chip discharge is good, and the cutting performance is excellent. As a result, it has high rigidity and excellent wear resistance, and the to... Read More
    Helix Angle (°)  40  Tip Angle (°)  60  Material  Ultra fine carbide  Surface Treatment  V1 (TiAlN coating) 
    Rating:
    100%
    from S$129.90
    Min. 2 days
  14. 2-blade anti-vibration end mill
    SPEED TIGER 2-blade anti-vibration end mill
    Due to the anti-vibration effect of changing the core thickness, it supports faster machining and larger cuts than conventional products. P-type T-coat has a high heat-resistant oxidation temperature and surface hardness, and has a wide range of applicable work materials for long life.
    Number of Tips  Dimension Z (mm)  Helix Angle (°)  35  Coating  AlTiN 
    Rating:
    60%
    from S$19.99
    Min. 2 days
  15. Chamfer (ment) mill OK coat
    Okazaki Seiko Chamfer (ment) mill OK coat
    Ideal for chamfering, V-grooving, and C-face machining
    Blade Diameter Tolerance (mm)  -0.01 ~ -0.03  Number of Tips  Helix Angle (°)  30  Material  EMO (ultra fine cemented carbide)  Shank Diameter Tolerance  h6 
    from S$89.99
    Min. 4 days
  16. 3-blade vibration-proof high helicopter end mill
    SPEED TIGER 3-blade vibration-proof high helicopter end mill
    A low-priced high-helicopter type with 3 blades that is ideal for grooving. Due to the anti-vibration effect of changing the core thickness, it supports higher speed machining and larger cuts than conventional products. P-type T-coat has a high heat-resistant oxidation temperature and surface har... Read More
    Number of Tips  Dimension Z (mm)  Helix Angle (°)  45  Coating  AlTiN 
    Rating:
    60%
    from S$17.99
    Min. 18 days
  17. Corner rounding end mill
    Fukuda Seiko (FKD) Corner rounding end mill
    Number of Tips  Material  HSS(SKH51) 
    from S$119.90
    Min. 2 days
  18. Carbide Multifunctional End Mill V Face Round 90 °
    THECUT Carbide Multifunctional End Mill V Face Round 90 °
    V-grooving, chamfering, center fir, drilling, side surface machining, etc. are possible with this one. The twist angle is 40 °, the sharpness is sharp, the chip discharge is good, and the cutting performance is excellent. As a result, it has high rigidity and excellent wear resistance, and the to... Read More
    Helix Angle (°)  40  Tip Angle (°)  90  Material  Ultra fine carbide  Surface Treatment  V1 (TiAlN coating) 
    Rating:
    100%
    from S$129.90
    Min. 5 days
  19. 4-blade vibration-proof high-helical end mill
    SPEED TIGER 4-blade vibration-proof high-helical end mill
    It is a high helicopter type that emphasizes anti-vibration effect of core thickness change, high speed processing and finish. The P-type T-coat has a high heat-resistant oxidation temperature and surface hardness, and supports a long life. The range of applicable work materials is wider than bef... Read More
    Dimension Z (mm)  Number of Tips  Helix Angle (°)  45  Coating  AlTiN 
    from S$19.99
    Min. 5 days
  20. Carbide 2-Flute Spiral Chamfering Cutter (For Copper / Aluminum Alloy) CA-SCC
    OSG Carbide 2-Flute Spiral Chamfering Cutter (For Copper / Aluminum Alloy) CA-SCC
    By adopting a sharp twisted blade, a clean machined surface with few burrs can be obtained.
    Number of Tips  Helix Angle (°)  30  Material  Cemented carbide  Surface Treatment  Non-coated 
    from S$149.90
    Min. 3 days
  21. Inner R Cutter for Copper Electrode, Aluminum, Plastic-DIR
    NS TOOL Inner R Cutter for Copper Electrode, Aluminum, Plastic-DIR
    We have achieved the world's smallest R and have a rich lineup of inner R. From the minimum tip diameter of 0.5 mm, it is possible to set the corner R for NC / MC.
    Helix Angle  0°  Number of Tips  Material  Ultra-fine particle cemented carbide  R Tolerance (mm)  ±0.02 
    from S$76.99
    Min. 3 days
  22. Chamfering cutter for aluminum processing
    Dijet Chamfering cutter for aluminum processing
    Number of Tips  Chamfer Angle  90° 
    from S$86.99
    Min. 5 days
  23. 2-flute pin angle sander long end mill
    WIDIN 2-flute pin angle sander long end mill
    2-flute pin angle sander EM long. Compatible with soft materials and aluminum alloys.
    Number of Tips  Helix Angle (°)  30  Coating  TiAlN 
    from S$39.99
    Min. 17 days
  24. 4-flute anti-vibration end mill
    SPEED TIGER 4-flute anti-vibration end mill
    Due to the anti-vibration effect of changing the core thickness, it supports higher speed machining and larger notch machining than conventional products. P-type T-coat has a high heat-resistant oxidation temperature and surface hardness, supports longer tool life, and has a wide range of applica... Read More
    Helix Angle (°)  35  Number of Tips  Dimension Z (mm)  Coating  AlTiN 
    from S$17.99
    Min. 17 days
  25. 4-flute vibration proof long end mill
    SPEED TIGER 4-flute vibration proof long end mill
    It is long but low price. The anti-vibration effect of changing the core thickness supports high-speed machining and larger cuts. P-type T-coat has a higher heat-resistant oxidation temperature and surface hardness, supports longer life, and has a wider range of applicable work materials than bef... Read More
    Helix Angle (°)  35  Dimension Z (mm)  Number of Tips  Material  600Nano  Coating  AlTiN 
    from S$38.99
    Min. 17 days
  26. Aurora coat end mill, 2-flute
    Sumitomo Electric Hard Metal Aurora coat end mill, 2-flute
    A 2-flute end mill that uses a DLC coat that is ideal for aluminum processing, with less welding and a good finish. Since the cutting resistance is small, high feed cutting and low rigidity workpiece machining are possible. * For separately shipped products, if you order by cash on delivery, it w... Read More
    Number of Tips  Helix Angle  30°  Material  DL1000 
    from S$78.99
    Min. 3 days
  27. Carbide Multifunctional End Mill V Face Round 120 °
    THECUT Carbide Multifunctional End Mill V Face Round 120 °
    V-grooving, chamfering, center fir, drilling, side surface machining, etc. are possible with this one. The twist angle is 40 °, the sharpness is sharp, the chip discharge is good, and the cutting performance is excellent. As a result, it has high rigidity and excellent wear resistance, and the to... Read More
    Tip Angle (°)  120  Helix Angle (°)  40  Material  Ultra fine carbide  Surface Treatment  V1 (TiAlN coating) 
    Rating:
    100%
    from S$129.90
    Min. 5 days
  28. 2-flute sander ball end mill
    WIDIN 2-flute sander ball end mill
    With a blade shape that emphasizes sharpness, it can be processed with soft materials and aluminum alloys. We use low price material 600MG-K.
    Number of Tips  Helix Angle (°)  30  Coating  TiAlN 
    from S$38.99
    Min. 2 days
  29. 4-flute pin angle sander long end mill
    WIDIN 4-flute pin angle sander long end mill
    4-flute pin angle sander EM long. Compatible with soft materials and aluminum alloys.
    Helix Angle (°)  30  Number of Tips  Coating  TiAlN 
    from S$43.99
    Min. 17 days
  30. 2-flute CDM multi-end mill
    SPEED TIGER 2-flute CDM multi-end mill
    A high-rigidity type with a large shank diameter for blade diameters of Φ10 or less. AlTiN coat with high lubricity is ideal for soft materials with HRC45 or less such as raw stainless steel, and it is a convenient tool to have one in the magazine rack. <Applicable processing content> Cente... Read More
    RoHS directive (corresponding to 10 substances)  Number of Tips  Helix Angle (°)  35  Material  600Nano  Coating  AlTiN 
    from S$48.99
    Min. 5 days
  31. 2-flute SI coated end mill
    SPEED TIGER 2-flute SI coated end mill
    Although it is an SI coat, it is a low price. SI (silicon-based) coat with high surface hardness and high heat-resistant oxidation temperature supports steel-based work materials with high surface hardness such as tempering materials. Supports longer tool life.
    Number of Tips  Helix Angle (°)  35  Coating  TiSiN 
    from S$17.99
    Min. 23 days
  32. 6-flute high-efficiency machining end mill AlTiN coating
    Niagara Cutter 6-flute high-efficiency machining end mill AlTiN coating
    Advanced groove shape. Adopting eccentric clearance angle, center cut. Outstanding lateral pulling fracture strength. Suitable for carbon steel, stainless steel, and heat-resistant alloys.
    Blade Diameter Tolerance (mm)  +0/-0.05  Number of Tips  Coating  AlTin 
    from S$59.99
    Min. 5 days
  33. Center chamfering end mill
    SANKO MFG Center chamfering end mill
    Since the outer diameter and shank have the same diameter, work interference can be prevented. It can be used for a wide range of purposes. * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Outer Diameter Tolerance (mm)  0~-0.03  Tip Angle (°)  120  Number of Tips  Helix Angle (°)  30 
    from S$64.99
    Min. 5 days
  34. O-ring groove end mill (P series)
    SANKO MFG O-ring groove end mill (P series)
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Dimension Tolerance (mm)  0~-0.02  Helix Angle (°)  30 
    from S$129.90
    Min. 5 days
  35. Strong type taper shank end mill (MT-2)
    Mr. Meister Strong type taper shank end mill (MT-2)
    It is used for surface cutting of materials with a mini milling machine Little Milling 1 etc. Face meal.
    RoHS directive (corresponding to 10 substances)  Specification  Arbor MT-2 
    from S$279.90
    Min. 6 days
  36. 4-flute anti-vibration split end mill
    GCT+ 4-flute anti-vibration split end mill
    Anti-vibration effect due to unequal division and high lubrication ACR coating are compatible with stainless steel, titanium alloys, aluminum alloys, and copper alloys. With a small gasher close to the pin angle and a 42 ° high helicopter, it is possible to make large cuts in soft materials. A ve... Read More
    Number of Tips  Helix Angle (°)  42  Coating  ACR 
    from S$39.99
    Min. 5 days
  37. Hanger for 5P
    Panasonic Hanger for 5P
    Type  For 5P 
    from S$15.99
    Min. 5 days
  38. Mugen coating series M thread mill
    NS TOOL Mugen coating series M thread mill
    A blade shape that emphasizes sharpness is used to improve processing accuracy. Infinite coating is used to extend the service life. Twisting
    Surface Treatment  Infinite coating  Material  Ultra fine cemented carbide 
    from S$97.99
    Min. 5 days
  39. Carbide chamfering end mill + FX coat + 2 blades + corner rounding + FX-ECR
    OSG Carbide chamfering end mill + FX coat + 2 blades + corner rounding + FX-ECR
    Helix Angle (°)  Number of Tips  Material  Carbide (CARBIDE)  Surface Treatment  FX coating 
    from S$119.90
    Min. 3 days
  40. Solid spiral end mill (2-flute)
    Sumitomo Electric Hard Metal Solid spiral end mill (2-flute)
    Carbide end mill standard 2-flute end mill * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Number of Tips  Helix Angle  30°  Material  A1  Corner  Pinkado 
    from S$47.99
    Min. 3 days
View : Grid List
Filter

Items 1 - 40 of 1124

Set Ascending Direction