All Category

High Speed Steel End Mills

View : Grid List
Filter

Items 1 - 40 of 869

Set Ascending Direction
  1. High-speed Steel Square End Mill Short 4-BLade Center Cut
    MonotaRO High-speed Steel Square End Mill Short 4-BLade Center Cut
    A high-speed end mill suitable for side machining and finishing. Carbon steel, alloy steel, cast iron, aluminum alloy * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~+0.03  Number of Tips  Material  Cobalt high speed steel  Shank Diameter Tolerance (mm)  h6 
    Rating:
    90%
    from S$12.99
    Min. 2 days
  2. Square High-Speed Steel End Mill, Short, 2-Flute
    MonotaRO Square High-Speed Steel End Mill, Short, 2-Flute
    Suitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Shank Diameter Tolerance (mm)  h6 
    Rating:
    92%
    from S$13.99
    Min. 2 days
  3. High-speed square end mill, long, 4-flute, center cut
    MonotaRO High-speed square end mill, long, 4-flute, center cut
    Suitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~+0.03  Helix Angle (°)  30  Number of Tips 
    Rating:
    99%
    from S$18.99
    Min. 2 days
  4. High-speed ball end mill, 2-flute
    MonotaRO High-speed ball end mill, 2-flute
    * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.030  Number of Tips  Helix Angle (°)  30 
    Rating:
    88%
    from S$19.99
    Min. 2 days
  5. 4 Blade Long Blade End Mill
    SANKO MFG 4 Blade Long Blade End Mill
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Dimension Tolerance (mm)  +0.03~0  Helix Angle (°)  30  Number of Tips 
    Rating:
    93%
    from S$35.99
    Min. 2 days
  6. SG-FAX Roughing end mill Fine pitch short
    NACHI (NACHI-FUJIKOSHI) SG-FAX Roughing end mill Fine pitch short
    SG coating is applied to powdered highs to enable high-efficiency machining like carbide. Lifespan is more than 3 times that of conventional products. Supports from mold steel to difficult-to-cut materials. Carbon steel, alloy steel, pre-hardened steel, die steel, heat resistant alloy, cast iron,... Read More
    Surface Treatment  SG (TiCN) coating  Helix Angle  Standard  Tolerance (μm)  ±100 
    from S$109.90
    Min. 4 days
  7. 4-flute regular blade end mill
    SANKO MFG 4-flute regular blade end mill
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Number of Tips 
    from S$29.99
    Min. 5 days
  8. 2-Flute Ball End Mill Regular Blade
    SANKO MFG 2-Flute Ball End Mill Regular Blade
    Number of Tips  Material  High cobalt high speed (SKH57) 
    from S$59.99
    Min. 110 days
  9. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Shank Diameter (Φmm)  Material  Cobalt high speed HS-Co 
    from S$55.99
    Min. 5 days
  10. Estec Muscle 3-Flute End Mill Regular Blade
    SANKO MFG Estec Muscle 3-Flute End Mill Regular Blade
    Uses high-grade powder highs. The original blade mold enables from heavy cutting to finishing.
    Outer Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  50  Material  High-class powder HSS (STEC) 
    from S$48.99
    Min. 183 days
  11. Super hard long end mill 4-flute
    NACHI (NACHI-FUJIKOSHI) Super hard long end mill 4-flute
    A general-purpose end mill that can process copper, stainless steel, and aluminum. Suitable for wide side surface and deep side surface processing.
    Number of Tips  Helix Angle  Standard  Shank Diameter Tolerance (mm)  h7 
    from S$53.99
    Min. 4 days
  12. 4.0x 60mm end mill (TiN coat, Co-HSS / 4 blades)
    ESCO 4.0x 60mm end mill (TiN coat, Co-HSS / 4 blades)
    Blade Length (mm)  12  Blade Diameter (Φmm)  Number of Tips  Overall Length (mm)  60  Shank Diameter (Φmm)  Material  Cobalt heiss  Esco Part No.  EA824RB-4.0  Surface Treatment  TiN coat 
    from S$49.99
    Min. 6 days
  13. N coating REα nick end mill 3D type
    SANKO MFG N coating REα nick end mill 3D type
    Adopting a new surface treatment "N coating", it achieves a long life of 1.8 times or more compared to general products. Four types of blade lengths are available to suit your needs.
    Helix Angle (°)  30  Material  Cobalt high speed (HS-Co)  Surface Treatment  N coating 
    from S$87.99
    Min. 5 days
  14. 3S end mill 6 blades special long blade 6XLF
    Fukuda Seiko (FKD) 3S end mill 6 blades special long blade 6XLF
    Shank Diameter (Φmm)  42  Number of Tips  Material  HSS-Co(SKH56) 
    from S$1,999.00
    Min. 5 days
  15. High sluffing end mill, short, 4-flute
    MonotaRO High sluffing end mill, short, 4-flute
    * Do not use for anything other than its intended purpose.
    Helix Angle (°)  30  Number of Tips  Material  Cobalt high speed steel 
    Rating:
    95%
    from S$28.99
    Min. 2 days
  16. High-speed end mill for aluminum, short, 2-flute
    MonotaRO High-speed end mill for aluminum, short, 2-flute
    * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  42  Shank Diameter Tolerance (mm)  h6 
    Rating:
    83%
    from S$15.99
    Min. 2 days
  17. Square High-Speed Steel End Mill, Long, 2-Flute
    MonotaRO Square High-Speed Steel End Mill, Long, 2-Flute
    Suitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30 
    Rating:
    96%
    from S$18.99
    Min. 2 days
  18. High-speed square end mill Medium 2-flute
    MonotaRO High-speed square end mill Medium 2-flute
    Suitable for processing carbon steel, alloy steel, pre-hardened steel (HRC30-40), aluminum, etc. * Do not use for anything other than its intended purpose.
    Number of Tips  Helix Angle (°)  30  Shank Diameter Tolerance (mm)  h6 
    Rating:
    100%
    from S$15.99
    Min. 2 days
  19. NK end mill 2-flute long blade
    MOLDINO (Former Hitachi Tool) NK end mill 2-flute long blade
    Side cutting / counterbore processing * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Specification  Medium finishing / finishing  Shank Diameter Tolerance (mm)  h7 
    Rating:
    93%
    from S$38.99
    Min. 2 days
  20. Cobalt High Speed ​​Square End Mill 2 Flute Short EDS
    OSG Cobalt High Speed ​​Square End Mill 2 Flute Short EDS
    Dimension Tolerance (mm)  0~-0.030  Number of Tips  Helix Angle (°)  30 
    Rating:
    83%
    from S$29.99
    Min. 2 days
  21. Aluminum end mill
    MOLDINO (Former Hitachi Tool) Aluminum end mill
    Side cutting, grooving, counterbore processing * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Blade Diameter Tolerance (mm)  0~-0.0.3  Number of Tips  Helix Angle (°)  45  Helix Angle  45°  Shank Diameter Tolerance (mm)  h7 
    Rating:
    91%
    from S$32.99
    Min. 2 days
  22. 2-flute General-purpose end mill Medium blade
    Mitsubishi Materials 2-flute General-purpose end mill Medium blade
    It is the most versatile end mill with a wide blade length and overall length.
    Number of Tips  Helix Angle (°)  30  Cutting Edge Shape  Pinkado  Shape  Square 
    Rating:
    85%
    from S$28.99
    Min. 2 days
  23. 4-Flute Center Cutting End Mill (M)
    Mitsubishi Materials 4-Flute Center Cutting End Mill (M)
    Suitable for side surface machining and finish cutting, and vertical feed is also possible. The most versatile 4-flute high-speed end mill. * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Helix Angle (°)  30  Number of Tips  Cutting Edge Shape  Pinkado  Shape  Square 
    from S$29.99
    Min. 2 days
  24. Cobalt High Speed ​​Square End Mill 2 Flute Short for Aluminum AL-EDS
    OSG Cobalt High Speed ​​Square End Mill 2 Flute Short for Aluminum AL-EDS
    Ideal for aluminum alloy processing. It can also be used for copper alloy and plastic processing.
    Tolerance  0~-0.030  Dimension Tolerance (mm)  0~-0.030  Number of Tips  Helix Angle (°)  40  Corner Shape  Pinkado 
    Rating:
    92%
    from S$37.99
    Min. 2 days
  25. 2-Flute General-Purpose End Mill Long Blade
    Mitsubishi Materials 2-Flute General-Purpose End Mill Long Blade
    A 2-flute general-purpose series that uses a long blade length and is ideal for deep carving. General purpose * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Number of Tips 
    Rating:
    97%
    from S$32.99
    Min. 2 days
  26. Single-blade aluminum sash, woodworking end mill (1LA)
    Mitsubishi Materials Single-blade aluminum sash, woodworking end mill (1LA)
    Deep carving type with longer blade length and overall length than 1MA
    Number of Tips  Helix Angle (°)  25  Material  High speed steel HSS  Type  Sharp corner  Cutting Edge Shape  Tip pin type 
    Rating:
    100%
    from S$46.99
    Min. 2 days
  27. Heavy end mill
    NACHI (NACHI-FUJIKOSHI) Heavy end mill
    A general-purpose roughing end mill that can process from steel to stainless steel and aluminum. A special nick provides a machined surface comparable to a medium finish. Square end mill 4-flute. (Center cut)
    Number of Tips 
    Rating:
    100%
    from S$45.99
    Min. 2 days
  28. Cobalt High Speed Square End Mill + TiN Coat + Multi-Flute + Short + EX-TIN-EMS
    OSG Cobalt High Speed Square End Mill + TiN Coat + Multi-Flute + Short + EX-TIN-EMS
    Cobalt highs are used for the blade material. Excellent anti-welding and wear resistance with TiN coating. * Center holes are provided for outer diameters of 41 mm or more. * If you order by cash on delivery, it may be shipped the next day or later.
    Dimension Tolerance (mm)  0~+0.030  Helix Angle (°)  30  Corner Shape  Pinkado  Surface Treatment  TiN coating 
    Rating:
    100%
    from S$48.99
    Min. 2 days
  29. G Medium End Mill 2 Flute
    NACHI (NACHI-FUJIKOSHI) G Medium End Mill 2 Flute
    A general-purpose coated end mill that can process copper, stainless steel, and aluminum. Suitable for grooving.
    Dimension Tolerance (mm)  0~-0.020  Number of Tips  Surface Treatment  G (TiN) coating  Helix Angle  Standard  Shank Diameter Tolerance (mm)  h7 
    Rating:
    100%
    from S$37.99
    Min. 2 days
  30. G standard end mill 4-flute
    NACHI (NACHI-FUJIKOSHI) G standard end mill 4-flute
    A general-purpose coated end mill that can process copper, stainless steel, and aluminum. Suitable for side surface processing.
    Dimension Tolerance (mm)  +0.020~0  Number of Tips  Surface Treatment  G (TiN) coating  Helix Angle  Standard 
    from S$45.99
    Min. 2 days
  31. End mill for aluminum-1AL
    MOLDINO (Former Hitachi Tool) End mill for aluminum-1AL
    1-flute end mill for aluminum processing with excellent machinability Side processing Medium finishing / finishing processing
    Blade Diameter Tolerance (mm)  0~-0.1  Number of Tips  Helix Angle (°)  30  Abrasive Materials  Aluminum alloy wrought material  Shank Diameter Tolerance (mm)  h7 
    Rating:
    100%
    from S$48.99
    Min. 2 days
  32. Cobalt High Speed ​​Square End Mill 2 Flute Long EDL
    OSG Cobalt High Speed ​​Square End Mill 2 Flute Long EDL
    Dimension Tolerance (mm)  0~-0.030  Number of Tips  Helix Angle (°)  30 
    Rating:
    93%
    from S$37.99
    Min. 2 days
  33. High-speed end mill for aluminum, short 1-flute
    MonotaRO High-speed end mill for aluminum, short 1-flute
    * Do not use for anything other than its intended purpose.
    Number of Tips  Helix Angle (°)  30  Shank Diameter (Φmm)  Cutting Edge Shape  Pinkado  Shank Diameter Tolerance (mm)  h6  Blade Diameter Tolerance (mm)  ±0.15 
    Rating:
    100%
    from S$26.99
    Min. 2 days
  34. Surface Polishing Cutter
    MOLDINO (Former Hitachi Tool) Surface Polishing Cutter
    * If you order by cash on delivery, it may be shipped the next day or later.
    Chamfer Angle  90°  Material  Heiss 
    Rating:
    95%
    from S$27.99
    Min. 2 days
  35. Cobalt High Speed ​​Square End Mill 4-Flute Center Cut Short CC-EMS
    OSG Cobalt High Speed ​​Square End Mill 4-Flute Center Cut Short CC-EMS
    Suitable for side surface machining and finish cutting, and vertical feed is also possible. Center-cut short 4-flute end mill.
    Dimension Tolerance (mm)  0~+0.030  Helix Angle (°)  30  Number of Tips 
    Rating:
    95%
    from S$35.99
    Min. 2 days
  36. NK End Mill 4-Flute Long, Center Cut
    MOLDINO (Former Hitachi Tool) NK End Mill 4-Flute Long, Center Cut
    Side cutting * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Blade Diameter Tolerance (mm)  +0.03~0  Helix Angle (°)  30  Number of Tips  Specification  Medium finishing / finishing  Shank Diameter Tolerance (mm)  h7 
    Rating:
    84%
    from S$45.99
    Min. 2 days
  37. NK End Mill 2-Flute Regular
    MOLDINO (Former Hitachi Tool) NK End Mill 2-Flute Regular
    Side cutting, grooving, counterbore processing * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Specification  Medium finishing / finishing  Shank Diameter Tolerance (mm)  h7 
    Rating:
    85%
    from S$32.99
    Min. 2 days
  38. G standard end mill 4-flute
    NACHI (NACHI-FUJIKOSHI) G standard end mill 4-flute
    A general-purpose coated end mill that can process copper, stainless steel, and aluminum. Suitable for side surface processing.
    Number of Tips  Surface Treatment  G (TiN) coating  Helix Angle  Standard 
    Rating:
    80%
    from S$53.99
    Min. 2 days
  39. 3S End Mill 4 Flute, Especially Long Blade 4XLF
    Fukuda Seiko (FKD) 3S End Mill 4 Flute, Especially Long Blade 4XLF
    Number of Tips  Material  HSS-Co(SKH56) 
    Rating:
    90%
    from S$53.99
    Min. 2 days
  40. 2-flute long blade end mill
    SANKO MFG 2-flute long blade end mill
    Outer Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Material  Cobalt high speed (HS-Co) 
    from S$39.99
    Min. 153 days
View : Grid List
Filter

Items 1 - 40 of 869

Set Ascending Direction