All Category

Ball High-Speed End Mills

A ball end mill is a cutting tool with a cutting edge. By rotating this cutting tool at high speed, it is possible to machine various places such as walls, holes and grooves. The feature is that the bottom blade is spherical, and it is mainly used to create various curved shapes. Another feature is that it can be used for a variety of machining shapes, such as cutting the plastic part. Ball end mills can also be used according to the material to be processed, such as for resin and aluminum.
View : Grid List
Filter

Items 1 - 40 of 58

Set Ascending Direction
  1. High-speed ball end mill, 2-flute
    MonotaRO High-speed ball end mill, 2-flute
    * Do not use for anything other than its intended purpose.
    Blade Diameter Tolerance (mm)  0~-0.030  Number of Tips  Helix Angle (°)  30 
    Rating:
    88%
    from S$19.99
    Min. 2 days
  2. 2-Flute Ball End Mill Regular Blade
    SANKO MFG 2-Flute Ball End Mill Regular Blade
    Number of Tips  Material  High cobalt high speed (SKH57) 
    from S$59.99
    Min. 110 days
  3. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Shank Diameter (Φmm)  Material  Cobalt high speed HS-Co 
    from S$55.99
    Min. 5 days
  4. Cobalt High Speed ​​Ball End Mill 2 Flute EBD
    OSG Cobalt High Speed ​​Ball End Mill 2 Flute EBD
    The most standard 2-flute ball end mill.
    Number of Tips  Helix Angle (°)  30 
    Rating:
    100%
    from S$67.99
    Min. 2 days
  5. Ball end mill 2BE
    Fukuda Seiko (FKD) Ball end mill 2BE
    Number of Tips  Material  HSS-Co 
    from S$89.99
    Min. 5 days
  6. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Shank Diameter (Φmm)  Material  Cobalt high speed HS-Co 
    from S$55.99
    Min. 110 days
  7. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Material  Cobalt high speed HS-Co 
    from S$199.90
    Min. 110 days
  8. NK ball end mill
    MOLDINO (Former Hitachi Tool) NK ball end mill
    * If you order by cash on delivery, it may be shipped the next day or later.
    Number of Tips  Material  Cobalt heiss 
    from S$58.99
    Min. 3 days
  9. Powder High Speed ​​Ball End Mill V Coat XPM 2 Flute V-XPM-EBD
    OSG Powder High Speed ​​Ball End Mill V Coat XPM 2 Flute V-XPM-EBD
    A powdered high-speed XPM ball end mill with V coating.
    Number of Tips  Helix Angle (°)  32  Surface Treatment  V coating (composite multilayer coating) 
    from S$149.90
    Min. 3 days
  10. Ball end mill, 4-flute 4BE
    Fukuda Seiko (FKD) Ball end mill, 4-flute 4BE
    Number of Tips  Material  HSS-Co(SKH56) 
    from S$229.90
    Min. 5 days
  11. Cobalt High Speed ​​End Mill Roughing Ball Long Shank EX-LS-REBS
    OSG Cobalt High Speed ​​End Mill Roughing Ball Long Shank EX-LS-REBS
    RoHS directive (corresponding to 10 substances)  Helix Angle (°)  30  Act on Promoting Green Procurement  Conformity  Surface Treatment  TiN coating 
    from S$199.90
    Min. 5 days
  12. Cobalt High Speed ​​Ball End Mill TiN Coated 2-Flute EX-TIN-EBD
    OSG Cobalt High Speed ​​Ball End Mill TiN Coated 2-Flute EX-TIN-EBD
    Cobalt highs are used for the blade material Excellent anti-welding and wear resistance with TiN coating.
    Number of Tips  Helix Angle (°)  30  Surface Treatment  TiN 
    from S$97.99
    Min. 2 days
  13. NK ball end mill
    MOLDINO (Former Hitachi Tool) NK ball end mill
    General-purpose 2-flute ball end mill using molten highs
    Number of Tips  Helix Angle  30°  Material  Cobalt heiss  Cutting Edge Shape  ball  Shank Diameter Tolerance (mm)  h7  R Tolerance (mm)  ±0.02 
    from S$64.99
    Min. 6 days
  14. Roughing ball end mill
    SANKO MFG Roughing ball end mill
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.05  Helix Angle (°)  30  Number of Tips 
    from S$149.90
    Min. 5 days
  15. Cobalt High Speed ​​Taper Ball End Mill 2 Flute Short TPBDS
    OSG Cobalt High Speed ​​Taper Ball End Mill 2 Flute Short TPBDS
    Number of Tips  Helix Angle (°)  25  Material  Cobalt high speed steel (HSS-Co)  Act on Promoting Green Procurement  Conformity  Tolerance of Taper Half Angle (minute)  ±10 
    from S$149.90
    Min. 5 days
  16. Long shank ball end mill, 2-flute 2LS-BE
    Fukuda Seiko (FKD) Long shank ball end mill, 2-flute 2LS-BE
    Number of Tips 
    from S$229.90
    Min. 5 days
  17. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Material  Cobalt high speed HS-Co 
    from S$87.99
    Min. 110 days
  18. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Overall Length (mm)  150  Shank Diameter (Φmm)  16  Number of Tips  Helix Angle (°)  30  Blade Length (mm)  35  Material  Cobalt high speed HS-Co 
    from S$139.90
    Min. 5 days
  19. Cobalt High Speed ​​Taper Ball End Mill 2 Flute Regular TPBDR
    OSG Cobalt High Speed ​​Taper Ball End Mill 2 Flute Regular TPBDR
    Number of Tips  Helix Angle (°)  25  Material  Cobalt high speed steel (HSS-Co)  Act on Promoting Green Procurement  Conformity  Tolerance of Taper Half Angle (minute)  ±10 
    from S$199.90
    Min. 5 days
  20. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Material  Cobalt high speed HS-Co 
    from S$55.99
    Min. 110 days
  21. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Material  Cobalt high speed HS-Co 
    from S$169.90
    Min. 5 days
  22. Ball end mill, 2-flute
    NACHI (NACHI-FUJIKOSHI) Ball end mill, 2-flute
    Number of Tips  Material  Heiss 
    from S$56.99
    Min. 4 days
  23. Cobalt High Speed ​​Ball End Mill Multi-Flute EBM
    OSG Cobalt High Speed ​​Ball End Mill Multi-Flute EBM
    Helix Angle (°)  30  Act on Promoting Green Procurement  Conformity 
    from S$119.90
    Min. 5 days
  24. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Material  Cobalt high speed HS-Co 
    from S$63.99
    Min. 5 days
  25. Taper blade ball end mill
    SANKO MFG Taper blade ball end mill
    Tolerance for Ball Endmill Radius (mm)  0~-0.04  tapered piece angle tolerance (min)  0~-10  Helix Angle (°)  25  Material  Powder high speed (SPM) 
    from S$119.90
    Min. 5 days
  26. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Overall Length (mm)  150  Shank Diameter (Φmm)  16  Number of Tips  Helix Angle (°)  30  Material  Cobalt high speed HS-Co 
    from S$119.90
    Min. 5 days
  27. AG mill ball (2-flute)
    NACHI (NACHI-FUJIKOSHI) AG mill ball (2-flute)
    Number of Tips 
    from S$77.99
    Min. 4 days
  28. ESM ball end mill
    MOLDINO (Former Hitachi Tool) ESM ball end mill
    Engraving, curved surface processing, R processing
    Number of Tips  Specification  Medium finishing / finishing  Material  Powdered high speed (high speed steel) 
    from S$97.99
    Min. 3 days
  29. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Shank Diameter (Φmm)  Material  Cobalt high speed HS-Co 
    from S$69.99
    Min. 5 days
  30. Long Shank Ball End Mill 4 Flute 4LS-BE
    Fukuda Seiko (FKD) Long Shank Ball End Mill 4 Flute 4LS-BE
    Number of Tips  Material  HSS-Co(SKH57) 
    from S$999.00
    Min. 5 days
  31. NK Ball End Mill-NB
    MOLDINO (Former Hitachi Tool) NK Ball End Mill-NB
    Blade Diameter Tolerance (mm)  0~-0.03  Shank Diameter (Φmm)  10  Blade Diameter (Φmm)  10.0  Overall Length (mm)  110  Number of Tips  Blade Length (mm)  22.0  Helix Angle  30°  Ball Radius R (mm)  Specification  Medium finishing / finishing  Shank Diameter Tolerance (mm)  h7  R Tolerance (mm)  ±0.02 
    from S$87.99
    Min. 3 days
  32. End mill HS ball BELR
    Fukuda Seiko (FKD) End mill HS ball BELR
    Number of Tips  Material  HSSCO 
    from S$299.90
    Min. 9 days
  33. End mill HS ball LS-BER
    Fukuda Seiko (FKD) End mill HS ball LS-BER
    Material  HSSCO 
    from S$199.90
    Min. 9 days
  34. Estec 2-flute ball end mill
    SANKO MFG Estec 2-flute ball end mill
    Uses high-grade powder highs. Can process difficult-to-cut materials and process for a long time.
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Material  High-class powder HSS (STEC) 
    from S$77.99
    Min. 243 days
  35. Powder high taper ball end mill + XPM + 2 blades + short + XPM-TPBDS
    OSG Powder high taper ball end mill + XPM + 2 blades + short + XPM-TPBDS
    A tapered blade ball end mill that uses powdered high-speed XPM as the base material.
    Number of Tips  Helix Angle (°)  25  Act on Promoting Green Procurement  Conformity  Material  Powder high speed (XPM)  Tolerance of Taper Half Angle (minute)  ±10 
    from S$199.90
    Min. 5 days
  36. Endmill Court HS Ball 2AGRE
    NACHI (NACHI-FUJIKOSHI) Endmill Court HS Ball 2AGRE
    Number of Tips  Material  HSSCO 
    from S$299.90
    Min. 5 days
  37. 2-flute ball end mill regular blade
    SANKO MFG 2-flute ball end mill regular blade
    Number of Tips  Material  Cobalt heiss 
    from S$1,299.00
    Min. 5 days
  38. C coated 4-flute ball end mill short blade
    SANKO MFG C coated 4-flute ball end mill short blade
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Helix Angle (°)  30  Number of Tips  Surface Treatment  C coating  Material  High cobalt high speed (SKH57) 
    from S$119.90
    Min. 5 days
  39. ESM-C Coated Ball End Mill-2ESMBC
    MOLDINO (Former Hitachi Tool) ESM-C Coated Ball End Mill-2ESMBC
    Blade Diameter Tolerance (mm)  0~-0.03  Number of Tips  Helix Angle  30°  Surface Treatment  Century Court  Specification  Medium finishing / finishing  Material  Powdered high speed (high speed steel)  Shank Diameter Tolerance (mm)  h7  R Tolerance (mm)  ±0.02 
    from S$129.90
    Min. 3 days
  40. 2-flute ball end mill short blade
    SANKO MFG 2-flute ball end mill short blade
    Tolerance for Ball Endmill Radius (mm)  0~-0.03  Number of Tips  Helix Angle (°)  30  Material  Cobalt high speed HS-Co 
    from S$649.90
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 58

Set Ascending Direction