All Category

Insert Taps

View : Grid List
Filter

36 Item(s)

Set Ascending Direction
  1. Screw Thread Inserts Tap HL-HT Screw Type: M
    OSG Screw Thread Inserts Tap HL-HT Screw Type: M
    Used for screwing female threads into which helical coils are inserted. Compared to ordinary taps with the same nominal size, the pitch is the same, but the outer diameter is made larger by the amount of the insert.
    Type of Thread 
    Rating:
    86%
    from S$25.99
    Min. 2 days
  2. For insert screws + spiral tap + EX-HL-SFT
    OSG For insert screws + spiral tap + EX-HL-SFT
    Accuracy  1b  Chamfer  2.5P  Number of Flutes  Helix Angle (°)  35  Material  High vanadium high speed (HSSE)  Type of Thread 
    Rating:
    60%
    from S$32.99
    Min. 2 days
  3. Spiral tap for aluminum material (for insert coil screw) AL-SP STI
    YAMAWA Spiral tap for aluminum material (for insert coil screw) AL-SP STI
    * This product is a tap for insert coil (Helisert Sprue). Please note that it is different from the normal tap diameter. * If you order by cash on delivery, it may be shipped the next day or later.
    Rating:
    80%
    from S$53.99
    Min. 4 days
  4. Point Tap for Insert Screw EX-HL-POT
    OSG Point Tap for Insert Screw EX-HL-POT
    Accuracy  1b  Number of Flutes  Chamfer  5P  Material  High vanadium high speed (HSSE)  Type of Thread 
    Rating:
    100%
    from S$32.99
    Min. 2 days
  5. E-Sert Tap
    TSUGAMI E-Sert Tap
    A tap specially designed and manufactured for E-sert pilot holes.
    from S$29.99
    Min. 6 days
  6. E-Sert Tap # 1 # 2 # 3 Set
    TSUGAMI E-Sert Tap # 1 # 2 # 3 Set
    A tap specially designed and manufactured for E-sert pilot holes.
    from S$87.99
    Min. 2 days
  7. E-Sert Spiral Tap
    TSUGAMI E-Sert Spiral Tap
    A tap specially designed and manufactured for E-sert pilot holes.
    Rating:
    60%
    from S$38.99
    Min. 6 days
  8. E-Sert Tap # 2 # 3 Set
    TSUGAMI E-Sert Tap # 2 # 3 Set
    A tap specially designed and manufactured for E-sert pilot holes.
    Rating:
    100%
    from S$64.99
    Min. 4 days
  9. Nu-Roll Tap for Non-Ferrous Metal for Insert Screw HL-B-NRT
    OSG Nu-Roll Tap for Non-Ferrous Metal for Insert Screw HL-B-NRT
    Aluminum (casting, rolling, forged alloy) and other light alloys, suitable for chip damage countermeasures or for extending the life of taps.
    Chamfer  2P  Type of Thread  Surface Treatment  Homo processing  Material  Heiss 
    from S$39.99
    Min. 3 days
  10. E-Cert Tap Set of 3
    TSUGAMI E-Cert Tap Set of 3
    A tap specially designed and manufactured for E-sert pilot holes.
    from S$86.99
    Min. 6 days
  11. E-Sert Point Tap
    TSUGAMI E-Sert Point Tap
    A tap specially designed and manufactured for E-sert pilot holes.
    from S$39.99
    Min. 6 days
  12. Spiral Tap for Insert Screw Long Shank HL-LT-SFT
    OSG Spiral Tap for Insert Screw Long Shank HL-LT-SFT
    Type of Thread 
    from S$45.99
    Min. 3 days
  13. E-sert tap 2-piece set
    TSUGAMI E-sert tap 2-piece set
    A tap specially designed and manufactured for E-sert pilot holes.
    from S$56.99
    Min. 5 days
  14. Carbide Hand Tap for Light Alloy (For Insert Coil Screw) N-CT LA STI
    YAMAWA Carbide Hand Tap for Light Alloy (For Insert Coil Screw) N-CT LA STI
    Type of Thread 
    from S$249.90
    Min. 4 days
  15. E-Cert Tap Set
    TSUGAMI E-Cert Tap Set
    from S$199.90
    Min. 5 days
  16. Point Tap for Insert Screw Long Shank HL-LT-POT
    OSG Point Tap for Insert Screw Long Shank HL-LT-POT
    Type of Thread 
    from S$43.99
    Min. 3 days
  17. For insert screws + hand tap + HL-HT + screw type: U
    OSG For insert screws + hand tap + HL-HT + screw type: U
    from S$25.99
    Min. 2 days
  18. E-cert 2 taps (iron / fabric)
    TSUGAMI E-cert 2 taps (iron / fabric)
    Thread Pitch  2.5  Material  Iron  Nominal Size of Screw  M18  Surface Treatment  Phosphate 
    from S$299.90
    Min. 12 days
  19. Nu-Roll Tap for Non-Ferrous Metal for Insert Screw Long Shank HL-LT-B-NRT
    OSG Nu-Roll Tap for Non-Ferrous Metal for Insert Screw Long Shank HL-LT-B-NRT
    Material  High speed steel HSS  Type of Thread 
    from S$63.99
    Min. 3 days
  20. E-Cert Tap 2-Piece Set for Tripod
    TSUGAMI E-Cert Tap 2-Piece Set for Tripod
    A tap specially designed and manufactured for E-sert pilot holes.
    Suitable for  E-Sert 1 / 4-20 
    from S$77.99
    Min. 6 days
  21. Spiral tap + for insert screw + A-SFT + HL + screw type: M
    OSG Spiral tap + for insert screw + A-SFT + HL + screw type: M
    Type of Thread 
    from S$49.99
    Min. 3 days
  22. For insert screws + hand tap + long shank + HL-LT + screw type: M
    OSG For insert screws + hand tap + long shank + HL-LT + screw type: M
    Material  High speed steel HSS  Type of Thread 
    from S$35.99
    Min. 3 days
  23. E-cert tap for tripod
    TSUGAMI E-cert tap for tripod
    A tap specially designed and manufactured for E-sert pilot holes.
    Rating:
    100%
    from S$38.99
    Min. 6 days
  24. E-Cert Tap Set of 3 for tripod
    TSUGAMI E-Cert Tap Set of 3 for tripod
    A tap specially designed and manufactured for E-sert pilot holes.
    Suitable for  E-Sert 1 / 4-20 
    from S$129.90
    Min. 6 days
  25. Insert Tap
    Recoil Japan Insert Tap
    The pitch is the same as a normal tap, but the outer diameter of the tap is made larger for inserts. Dedicated tap for screw thread insert (STI)
    Specification  Color: None  Accuracy  Level 2  Tip Shape  Middle tap 
    from S$29.99
    Min. 2 days
  26. For insert screws + hand tap + long shank + HL-LT + screw type: U
    OSG For insert screws + hand tap + long shank + HL-LT + screw type: U
    Material  High speed steel HSS 
    from S$35.99
    Min. 3 days
  27. Spiral tap + for insert screw + A-SFT + HL + screw type: U
    OSG Spiral tap + for insert screw + A-SFT + HL + screw type: U
    Chamfer  2.5P  Number of Flutes  Type of Thread  UNF 
    from S$63.99
    Min. 3 days
  28. Spiral tap + for insert screw + long shank + A-LT-SFT + HL
    OSG Spiral tap + for insert screw + long shank + A-LT-SFT + HL
    Chamfer  2.5P  Number of Flutes  Material  Heiss  Surface Treatment  V coating 
    from S$67.99
    Min. 3 days
  29. Recoil tap (METRIC)
    TAKEGAWA Recoil tap (METRIC)
    from S$37.99
    Min. 6 days
  30. Hand tap for insert coil Metric thread (STI-HT)
    YAMAWA Hand tap for insert coil Metric thread (STI-HT)
    It is a part made of a relatively soft material, and is used for female thread processing for inserting and using an insert coil after threading for the purpose of reinforcing female threads and increasing durability. * For separately shipped products, if you order by cash on delivery, it will be... Read More
    Discontinued
  31. Sprue dedicated tap
    NIPPON SPREW Sprue dedicated tap
    A high sprue tap that is larger than a normal tap with the same nominal diameter of the applicable screw by the sprue line segment. Medium, top, 2 bottles set. Work material: Soft material such as aluminum.
    Set Contents  Medium x 1, Upper x 1 
    Discontinued
  32. Hand tap for insert coil Metric thread (STI-HT)
    YAMAWA Hand tap for insert coil Metric thread (STI-HT)
    It is a part made of a relatively soft material, and is used for female thread processing for inserting and using an insert coil after threading for the purpose of reinforcing female threads and increasing durability. 5P / medium tap with bite, 1.5P / top tap
    Type of Thread  Shape  M5 and below are protruding centers. 
    Rating:
    100%
    Discontinued
  33. Hand tap for insert coil For unified screw (STI-HT)
    YAMAWA Hand tap for insert coil For unified screw (STI-HT)
    It is a part made of a relatively soft material, and is used for female thread processing for inserting and using an insert coil after threading for the purpose of reinforcing female threads and increasing durability. * If you order by cash on delivery, it may be shipped the next day or later.
    Discontinued
  34. Insert coil tap
    YAMAWA Insert coil tap
    * If you order by cash on delivery, it may be shipped the next day or later.
    Discontinued
  35. Sprue 2-piece tap for M thread (iron / fabric)
    Osaka Spirit Sprue 2-piece tap for M thread (iron / fabric)
    Surface Treatment  Fabric (or standard)  Material  Iron (or standard) 
    Discontinued
  36. Spiral tap for insert coil
    YAMAWA Spiral tap for insert coil
    * This product is a tap for insert coil (Helisert Sprue). Please note that it is different from the normal tap diameter.
    Thread Number of Chamfered Portion  2.5 mountains  Type of Thread 
    Discontinued
View : Grid List
Filter

36 Item(s)

Set Ascending Direction