All Category

Turning Inserts / Parallelogram

View : Grid List
Filter

33 Item(s)

Set Ascending Direction
  1. Chip KNMX-71
    SANDVIK Chip KNMX-71
    Clearance Angle (°)  Nose Radius r (mm)  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Shape  Parallelogram 55 °  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$279.90
    Min. 5 days
  2. Chip XCMT
    ISCAR Chip XCMT
    Clearance Angle (°)  Material  IC908  Chip Breaker  One side  Shape  Special shape 
    from S$199.90
    Min. 5 days
  3. Chip BTAT
    Mitsubishi Materials Chip BTAT
    (Material) PVD coating that can extend the life under the same conditions as the cemented carbide grade. VP coat suitable for cast iron.
    Corner Radius (mm)  0.03  Thickness (mm)  2.5  Trusco Part No.  658-4918  Chip Breaker  One side  Shape  Parallelogram 82 °  Material  VP15TF  with or without Hole  Yes  Corner Height Tolerance (mm)  ±0.005  Thickness Tolerance (mm)  ±0.025  Tolerance of Inscribed Circle (mm)  ±0.025 
    from S$169.90
    Min. 5 days
  4. Chip KNUX-R11
    SANDVIK Chip KNUX-R11
    * If you order by cash on delivery, it may be shipped the next day or later.
    Clearance Angle (°)  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Shape  Parallelogram 55 °  Tolerance of Inscribed Circle (mm)  ±0.08~±0.25  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.13~±0.38 
    Rating:
    100%
    from S$229.90
    Min. 2 days
  5. Chip BTAT-B
    Mitsubishi Materials Chip BTAT-B
    (Material) PVD coating that can extend the life under the same conditions as the cemented carbide grade. VP coat suitable for cast iron.
    Thickness (mm)  2.5  Chip Breaker  One side  Shape  Parallelogram 82 °  Material  VP15TF  with or without Hole  Yes  Corner Height Tolerance (mm)  ±0.005  Tolerance of Inscribed Circle (mm)  ±0.025  Thickness Tolerance (mm)  ±0.025 
    from S$169.90
    Min. 5 days
  6. Chip BTBT-B
    Mitsubishi Materials Chip BTBT-B
    (Material) PVD coating that can extend the life under the same conditions as the cemented carbide grade. VP coat suitable for cast iron.
    Thickness (mm)  2.5  Chip Breaker  One side  Shape  Parallelogram 82 °  Material  VP15TF  with or without Hole  Yes 
    from S$229.90
    Min. 5 days
  7. Chip KNMX-LP
    ISCAR Chip KNMX-LP
    with or without Hole  Socket Shape  Chip Breaker  Clearance Angle (°)  Cutting Blade Length (mm)  19.72  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.52  Shape  Parallelogram 55 °  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$229.90
    Min. 5 days
  8. Negative Insert for Turning  T-Max  P  KN □□ Type-16 (Parallelogram 55 °) R0.5  Recommended Grade P (Steel)
    SANDVIK Negative Insert for Turning T-Max P KN □□ Type-16 (Parallelogram 55 °) R0.5 Recommended Grade P (Steel)
    Tip thickness (mm)  04  nose (mm)  05  Chip size  16  Shape of Tip  K (parallelogram 55 °)  Tip clearance angle (°)  Applicable Workpiece Materials  P (steel)  Tip Groove / Hole Symbol 
    from S$299.90
    Min. 3 days
  9. Negative Insert for Turning  T-Max  P  KN □□ Type-16 (Parallelogram 55 °) R1.0  Recommended Grade P (Steel)
    SANDVIK Negative Insert for Turning T-Max P KN □□ Type-16 (Parallelogram 55 °) R1.0 Recommended Grade P (Steel)
    Tip thickness (mm)  04  nose (mm)  10  Chip size  16  Shape of Tip  K (parallelogram 55 °)  Tip clearance angle (°)  Applicable Workpiece Materials  P (steel)  Tip Groove / Hole Symbol 
    from S$299.90
    Min. 3 days
  10. Chip BTBT
    Mitsubishi Materials Chip BTBT
    (Material) PVD coating that can extend the life under the same conditions as the cemented carbide grade. VP coat suitable for cast iron.
    Corner Radius (mm)  0.03  Thickness (mm)  2.5  Chip Breaker  One side  Shape  Parallelogram 82 °  Material  VP15TF  with or without Hole  Yes 
    from S$229.90
    Min. 5 days
  11. Chip KNMX-71
    SANDVIK Chip KNMX-71
    Clearance Angle (°)  Nose Radius r (mm)  0.5  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Shape  Parallelogram 55 °  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$279.90
    Min. 5 days
  12. Chip XCMT
    OSG Chip XCMT
    RoHS directive (corresponding to 10 substances)  Manufacturer Product Code  7823064  Act on Promoting Green Procurement  Conformity  Material  XP9020  Shape  parallelogram 
    from S$169.90
    Min. 5 days
  13. Chip KNUX-FR13
    SANDVIK Chip KNUX-FR13
    Clearance Angle (°)  Nose Radius r (mm)  1.5  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Material  H13A  Shape  Parallelogram 55 °  Right or Left Hand  Right hand  Tolerance of Inscribed Circle (mm)  ±0.08~±0.25  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.13~±0.38 
    from S$229.90
    Min. 5 days
  14. Chip KNUX-R12
    SANDVIK Chip KNUX-R12
    Clearance Angle (°)  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Shape  Parallelogram 55 °  Right or Left Hand  Right hand  Tolerance of Inscribed Circle (mm)  ±0.08~±0.25  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.13~±0.38 
    from S$199.90
    Min. 2 days
  15. Chip KNMX-RP
    ISCAR Chip KNMX-RP
    with or without Hole  Chip Breaker  Socket Shape  Clearance Angle (°)  Cutting Blade Length (mm)  19.72  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.52  Shape  Parallelogram 55 °  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$229.90
    Min. 5 days
  16. Chip KNUX-L12
    SANDVIK Chip KNUX-L12
    Clearance Angle (°)  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Right or Left Hand  Left hand  Shape  Parallelogram 55 °  Tolerance of Inscribed Circle (mm)  ±0.08~±0.25  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.13~±0.38 
    from S$229.90
    Min. 3 days
  17. Chip KNUX-FR12
    SANDVIK Chip KNUX-FR12
    Clearance Angle (°)  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Material  H13A  Shape  Parallelogram 55 °  Right or Left Hand  Right hand  Tolerance of Inscribed Circle (mm)  ±0.08~±0.25  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.13~±0.38 
    from S$229.90
    Min. 5 days
  18. Chip KNUX-L11
    SANDVIK Chip KNUX-L11
    * If you order by cash on delivery, it may be shipped the next day or later.
    Clearance Angle (°)  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Shape  Parallelogram 55 °  Tolerance of Inscribed Circle (mm)  ±0.08~±0.25  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.13~±0.38 
    from S$199.90
    Min. 3 days
  19. Chip BTAT-B
    Mitsubishi Materials Chip BTAT-B
    (Material) PVD coating that can extend the life under the same conditions as the cemented carbide grade. VP coat suitable for cast iron.
    Thickness (mm)  2.5  Chip Breaker  One side  Shape  Parallelogram 82 °  Material  VP15TF  with or without Hole  Yes  Corner Height Tolerance (mm)  ±0.005  Thickness Tolerance (mm)  ±0.025  Tolerance of Inscribed Circle (mm)  ±0.025 
    from S$169.90
    Min. 5 days
  20. Chip KNUX
    SANDVIK Chip KNUX
    * If you order by cash on delivery, it may be shipped the next day or later.
    Socket Shape  Chip Breaker  with or without Hole  Clearance Angle (°)  Nose Radius r (mm)  Corner Radius (mm)  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Shape  Parallelogram 55 °  Right or Left Hand  Right hand  Tolerance of Inscribed Circle (mm)  ±0.08~±0.25  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.13~±0.38 
    from S$279.90
    Min. 5 days
  21. Chip BTAT-B
    Mitsubishi Materials Chip BTAT-B
    (Material) PVD coating that can extend the life under the same conditions as the cemented carbide grade. VP coat suitable for cast iron.
    Thickness (mm)  2.5  Chip Breaker  One side  Shape  Parallelogram 82 °  Material  VP15TF  with or without Hole  Yes  Corner Height Tolerance (mm)  ±0.005  Tolerance of Inscribed Circle (mm)  ±0.025  Thickness Tolerance (mm)  ±0.025 
    from S$169.90
    Min. 4 days
  22. Chip KNUX-FL12
    SANDVIK Chip KNUX-FL12
    Clearance Angle (°)  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Material  H13A  Right or Left Hand  Left hand  Shape  Parallelogram 55 °  Tolerance of Inscribed Circle (mm)  ±0.08~±0.25  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.13~±0.38 
    from S$229.90
    Min. 5 days
  23. Chip BTAT-B
    Mitsubishi Materials Chip BTAT-B
    (Material) PVD coating that can extend the life under the same conditions as the cemented carbide grade. VP coat suitable for cast iron.
    Thickness (mm)  2.5  Chip Breaker  One side  Shape  Parallelogram 82 °  Material  VP15TF  with or without Hole  Yes  Corner Height Tolerance (mm)  ±0.005  Tolerance of Inscribed Circle (mm)  ±0.025  Thickness Tolerance (mm)  ±0.025 
    from S$169.90
    Min. 5 days
  24. Chip MAC
    SANDVIK Chip MAC
    Discontinued
  25. Chip KNMX-1
    KYOCERA Chip KNMX-1
    Clearance Angle (°)  Inscribed Circle Diameter (Φmm)  9.525  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Corner Height Tolerance (mm)  ±0.08~±0.18  Shape  Parallelogram 55 °  Thickness Tolerance (mm)  ±0.13 
    Discontinued
  26. Chip KNUX
    SANDVIK Chip KNUX
    Clearance Angle (°)  Nose Radius r (mm)  1.5  Cutting Blade Length (mm)  19.7  Thickness (mm)  4.76  Inscribed Circle Diameter (Φmm)  9.525  Material  H13A  Right or Left Hand  Left hand  Shape  Parallelogram 55 °  Tolerance of Inscribed Circle (mm)  ±0.08~±0.25  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.13~±0.38 
    Discontinued
  27. Chip MAC
    SANDVIK Chip MAC
    Discontinued
  28. Chip KNMX
    Mitsubishi Materials Chip KNMX
    Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Clearance Angle (°)  Shape  Parallelogram 55 °  Thickness Tolerance (mm)  ±0.13  Thickness (mm)  5.56 
    Discontinued
  29. Chip MAC
    SANDVIK Chip MAC
    Discontinued
  30. Chip KNMX
    Mitsubishi Materials Chip KNMX
    Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Clearance Angle (°)  Thickness Tolerance (mm)  ±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Shape  Parallelogram 55 °  Thickness (mm)  5.56 
    Discontinued
  31. Chip ZCMT
    Dijet Chip ZCMT
    * If you order by cash on delivery, it may be shipped the next day or later.
    Corner Radius (mm)  0.4  Thickness (mm)  3.18  Clearance Angle (°)  Chip Breaker  One side  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    Discontinued
  32. Chip KNMX
    SANDVIK Chip KNMX
    * If you order by cash on delivery, it may be shipped the next day or later.
    Shape  Parallelogram 55 °  Material  4225  Clearance Angle (°)  Thickness Tolerance (mm)  ±0.13  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Inscribed Circle Diameter (Φmm)  9.525  Thickness (mm)  4.76  Corner Height Tolerance (mm)  ±0.08~±0.18  Cutting Blade Length (mm)  19.7 
    Discontinued
  33. Chip MAC
    SANDVIK Chip MAC
    Discontinued
View : Grid List
Filter

33 Item(s)

Set Ascending Direction