All Category

For Milling

View : Grid List
Filter

Items 1 - 40 of 1268

Set Ascending Direction
  1. Chip SDMA
    Sumitomo Electric Hard Metal Chip SDMA
    0.8  Angle θ (°)  15  Clearance Angle (°)  15  Dimension T (mm)  3.18  Dimension A (mm)  9.525  Socket Shape  Cylindrical hole  Shape  Square  Chip Breaker  Without breaker 
    from S$79.99
    Min. 5 days
  2. Chip JPW
    BIG DAISHOWA Chip JPW
    * If you order by cash on delivery, it may be shipped the next day or later.
    Shape  Hexagon 
    from S$89.99
    Min. 5 days
  3. Chip for milling SDKN
    MonotaRO Chip for milling SDKN
    * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any purpose other than its intended purpose.
    Inscribed Circle Diameter (Φmm)  12.7  Clearance Angle (°)  15  Thickness (mm)  3.18  Material  MNP40 (cermet)  Right or Left Hand  None  with or without Hole  None  Abrasive Materials  P (steel)  Shape  Square 90 °  Tolerance of Nose Position (mm)  ±0.013  Thickness Tolerance (mm)  ±0.025  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13 
    Rating:
    94%
    from S$54.99
    Min. 2 days
  4. Milling Tips TEEN
    MonotaRO Milling Tips TEEN
    * Be sure to wear protective equipment when using as there is a risk of injury. * Do not use for any purpose other than its intended purpose.
    Inscribed Circle Diameter (Φmm)  12.7  Clearance Angle (°)  20  Thickness (mm)  4.76  Shape  Equilateral triangle 60 °  Material  MNP40 (cermet)  with or without Hole  None  Abrasive Materials  P (steel)  Thickness Tolerance (mm)  ±0.025  Tolerance of Nose Position (mm)  ±0.025  Tolerance of Inscribed Circle (mm)  ±0.025 
    Rating:
    90%
    from S$95.99
    Min. 2 days
  5. Chip SDKN
    Sumitomo Electric Hard Metal Chip SDKN
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Rating:
    93%
    from S$63.99
    Min. 2 days
  6. Chip SEMT
    Mitsubishi Materials Chip SEMT
    Rating:
    100%
    from S$87.99
    Min. 2 days
  7. Chip SOMT
    Mitsubishi Materials Chip SOMT
    Inscribed Circle Diameter (Φmm)  12.7  Cutting Blade Length (mm)  12.7  Thickness (mm)  3.97  Chip Breaker  One side  Shape  Square 90 °  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$87.99
    Min. 2 days
  8. Tip SFKN
    Sumitomo Electric Hard Metal Tip SFKN
    from S$139.90
    Min. 2 days
  9. Chip SEEN
    Mitsubishi Materials Chip SEEN
    Socket Shape  Corner Radius (mm)  0.3  Cutting Blade Length (mm)  12.7  Clearance Angle (°)  20  Thickness (mm)  3.18  Chip Breaker  None  Shape  Square 90 ° 
    from S$97.99
    Min. 2 days
  10. Chip SEGT
    Mitsubishi Materials Chip SEGT
    Optimal grade for general machining and milling of cast iron for medium finishing of cast iron
    Cutting Blade Length (mm)  13.4  Dimension D1 (Φmm)  13.4  Corner Radius (mm)  2.2  Dimension F1 (mm)  2.2  Clearance Angle (°)  20  Trusco Part No.  205-7603  Dimension S1 (mm)  3.97  Thickness (mm)  3.97  Suitable for  Cutter: ASX445  Accuracy  Material  HTi10  Abrasive Materials  K (cast iron) / N (non-ferrous metal)  Chip Breaker  One side  Cutting Edge Shape  Sharp edge  Shape  Square 90 °  with or without Hole  Yes 
    Rating:
    80%
    from S$119.90
    Min. 2 days
  11. Chip AOMT-PEER-M
    Mitsubishi Materials Chip AOMT-PEER-M
    Cutting Blade Length (mm)  12  Thickness (mm)  3.6  Chip Breaker  One side  Shape  Parallelogram 85 °  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$129.90
    Min. 2 days
  12. Chip SDKN
    KYOCERA Chip SDKN
    with or without Hole  None  Shape  Square  Socket Shape 
    Rating:
    100%
    from S$63.99
    Min. 2 days
  13. Insert TEEN
    Sumitomo Electric Hard Metal Insert TEEN
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Rating:
    80%
    from S$99.90
    Min. 2 days
  14. Chip TEEN
    Mitsubishi Materials Chip TEEN
    * If you order by cash on delivery, it may be shipped the next day or later.
    Socket Shape  Shape  60 ° equilateral triangle  with or without Hole  None 
    from S$119.90
    Min. 2 days
  15. Chip XDGT-GL08
    Mitsubishi Materials Chip XDGT-GL08
    Corner Radius (mm)  0.8  Clearance Angle (°)  15  Cutting Blade Length (mm)  15.5  Thickness (mm)  Chip Breaker  One side  Material  TF15  Shape  parallelogram 
    from S$249.90
    Min. 2 days
  16. Chip APMT-PDER-H2
    Mitsubishi Materials Chip APMT-PDER-H2
    from S$129.90
    Min. 2 days
  17. Chip SEEN
    Mitsubishi Materials Chip SEEN
    Socket Shape 
    from S$129.90
    Min. 2 days
  18. Chip TPCH
    Sumitomo Electric Hard Metal Chip TPCH
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Clearance Angle (°)  11 
    from S$89.99
    Min. 2 days
  19. Chip SOMT
    Mitsubishi Materials Chip SOMT
    (Material) PVD coating that can extend the life under the same conditions as the cemented carbide grade. VP coat suitable for cast iron.
    Corner Radius (mm)  0.8  Inscribed Circle Diameter (Φmm)  12.7  Cutting Blade Length (mm)  12.7  Trusco Part No.  249-0501  Thickness (mm)  3.97  Chip Breaker  One side  Shape  Square 90 °  Material  VP15TF  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    Rating:
    100%
    from S$119.90
    Min. 2 days
  20. Chip SEER
    Mitsubishi Materials Chip SEER
    (Material) CVD coating with improved wear resistance and fracture resistance due to a special tough crystal structure. Work material: Steel / stainless steel
    Socket Shape  Corner Radius (mm)  0.3  Dimension Re (mm)  Dimension F1 (mm)  1.4  Dimension D1 (mm)  12.7  Cutting Blade Length (mm)  12.7  Trusco Part No.  155-9915  Clearance Angle (°)  20  Dimension S1 (mm)  3.18  Thickness (mm)  3.18  Material  F7030  Chip Breaker  One side  Abrasive Materials  P (steel) / M (stainless steel)  Shape  Square 90 ° 
    from S$129.90
    Min. 2 days
  21. Insert AXMT-G
    Sumitomo Electric Hard Metal Insert AXMT-G
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Chip Breaker  One side  Shape  Parallelogram 85 °  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.15  Corner Height Tolerance (mm)  ±0.08~±0.2  Thickness Tolerance (mm)  ±0.13 
    from S$109.90
    Min. 3 days
  22. Chip SPCH
    Sumitomo Electric Hard Metal Chip SPCH
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Clearance Angle (°)  11  Cutting Blade Length (mm)  15.875  Inscribed Circle Diameter (Φmm)  15.875  Thickness (mm)  4.76  Shape  90 ° square 
    from S$159.90
    Min. 2 days
  23. Chip TEKN
    Sumitomo Electric Hard Metal Chip TEKN
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Clearance Angle (°)  20  Thickness (mm)  3.18  Shape  Equilateral triangle  Socket Shape  No hole  Chip Breaker  Without breaker 
    from S$87.99
    Min. 3 days
  24. Chip TNMG
    Mitsubishi Materials Chip TNMG
    (Material) Optimal grade for general machining and milling of cast iron for medium finishing of cast iron
    Clearance Angle (°)  Chip Breaker  Both sides  Socket Shape  Cylindrical hole  Shape  Equilateral triangle 60 °  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    Rating:
    100%
    from S$64.99
    Min. 4 days
  25. Chip SEEN
    Mitsubishi Materials Chip SEEN
    (Material) CVD coating with improved wear resistance and fracture resistance due to a special tough crystal structure. Work material: Steel / stainless steel
    Socket Shape  Corner Radius (mm)  0.3  Dimension Re (mm)  1.0  Dimension F1 (mm)  1.4  Cutting Blade Length (mm)  12.7  Dimension D1 (mm)  12.7  Trusco Part No.  155-9893  Clearance Angle (°)  20  Dimension S1 (mm)  3.18  Thickness (mm)  3.18  Material  F7030  Chip Breaker  None  Shape  Square 90 ° 
    from S$129.90
    Min. 2 days
  26. Chip C32GUR
    FUJIGEN KOGYO Chip C32GUR
    NC End Mill / Shrilyn / Guts-Tenda Tip
    Number of Corners to Use  Shape  rhombus 
    Rating:
    60%
    from S$299.90
    Min. 3 days
  27. Chip TPCH
    Sumitomo Electric Hard Metal Chip TPCH
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Clearance Angle (°)  11 
    from S$89.99
    Min. 2 days
  28. Chip APMT
    MOLDINO (Former Hitachi Tool) Chip APMT
    * If you order by cash on delivery, it may be shipped the next day or later.
    Clearance Angle (°)  11  Chip Breaker  One side  Shape  Parallelogram 85 °  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$109.90
    Min. 3 days
  29. Chip SEKN
    SANDVIK Chip SEKN
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$199.90
    Min. 3 days
  30. Chip AOMT-H
    Mitsubishi Materials Chip AOMT-H
    * If you order by cash on delivery, it may be shipped the next day or later.
    Chip Breaker  One side  Shape  Parallelogram 85 °  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$129.90
    Min. 4 days
  31. Insert APMT
    OSG Insert APMT
    RoHS directive (corresponding to 10 substances)  Act on Promoting Green Procurement  Conformity 
    from S$199.90
    Min. 5 days
  32. Chip RDMW
    Mitsubishi Materials Chip RDMW
    Clearance Angle (°)  15  Chip Breaker  None  Shape  Round 
    from S$64.99
    Min. 4 days
  33. Chip SEMT
    Mitsubishi Materials Chip SEMT
    from S$119.90
    Min. 4 days
  34. Chip TEEN
    Mitsubishi Materials Chip TEEN
    Socket Shape 
    from S$129.90
    Min. 4 days
  35. Chip ADET-SR
    MOLDINO (Former Hitachi Tool) Chip ADET-SR
    * If you order by cash on delivery, it may be shipped the next day or later.
    Clearance Angle (°)  15  Thickness (mm)  3.18  Chip Breaker  One side  Shape  Parallelogram 85 °  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.025  Thickness Tolerance (mm)  ±0.025  Corner Height Tolerance (mm)  ±0.025 
    from S$149.90
    Min. 3 days
  36. Chip DEGX
    Mitsubishi Materials Chip DEGX
    (Material) Optimal grade for general machining and milling of cast iron for medium finishing of cast iron
    Inscribed Circle Diameter (Φmm)  12.7  Cutting Blade Length (mm)  15.5  Clearance Angle (°)  20  Thickness (mm)  4.76  Chip Breaker  Both sides  Socket Shape  Cylindrical hole  Shape  Diamond 55 °  Material  HTi10  Corner Height Tolerance (mm)  ±0.025  Tolerance of Inscribed Circle (mm)  ±0.025  Thickness Tolerance (mm)  ±0.13 
    from S$299.90
    Min. 4 days
  37. Chip SOMT
    Sumitomo Electric Hard Metal Chip SOMT
    Chip Breaker  One side  Clearance Angle (°)  Others  Shape  Square  with or without Hole  Yes 
    from S$95.99
    Min. 4 days
  38. Chip TEGX
    Mitsubishi Materials Chip TEGX
    (Material) Optimal grade for general machining and milling of cast iron for medium finishing of cast iron
    Socket Shape  Chip Breaker  Corner Radius (mm)  0.4  Trusco Part No.  118-7147  Cutting Blade Length (mm)  16.5  Clearance Angle (°)  20  Thickness (mm)  3.18  Inscribed Circle Diameter (Φmm)  9.525  Shape  Equilateral triangle 60 °  Material  HTi10  Tolerance of Inscribed Circle (mm)  ±0.025  Corner Height Tolerance (mm)  ±0.025  Thickness Tolerance (mm)  ±0.13 
    from S$229.90
    Min. 4 days
  39. Chip SPCH
    Sumitomo Electric Hard Metal Chip SPCH
    * For separately shipped products, if you order by cash on delivery, it will be shipped the next day or later.
    Clearance Angle (°)  11  Inscribed Circle Diameter (Φmm)  12.7  Cutting Blade Length (mm)  12.7  Thickness (mm)  3.18  Shape  90 ° square 
    from S$63.99
    Min. 3 days
  40. Chip GPMT-U2
    Mitsubishi Materials Chip GPMT-U2
    Corner Radius (mm)  0.4  Clearance Angle (°)  11  Thickness (mm)  2.38  Chip Breaker  One side  with or without Hole  Yes  Tolerance of Inscribed Circle (mm)  ±0.05~±0.13  Corner Height Tolerance (mm)  ±0.08~±0.18  Thickness Tolerance (mm)  ±0.13 
    from S$119.90
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 1268

Set Ascending Direction