All Category

Drill Sockets

View : Grid List
Filter

Items 1 - 40 of 42

Set Ascending Direction
  1. Drill socket
    TAKURA KOGU SEISAKUSYO  Drill socket
    MT (Morse taper) Used when you want to change or extend the shank.
    Rating:
    86%
    from S$129.90
    Min. 2 days
  2. Long drill socket
    TAKURA KOGU SEISAKUSYO  Long drill socket
    from S$179.90
    Min. 4 days
  3. Drill socket
    TRUSCO Drill socket
    It is used when you want to change the size of the Morse taper or when you want to extend it.
    Specification  Hardened abrasive 
    from S$179.90
    Min. 2 days
  4. Drill socket
    PROCHI Drill socket
    Full polishing, high frequency partial quenching Full polishing, high frequency partial quenching drill socket.
    from S$89.99
    Min. 4 days
  5. Drill socket long type
    TRUSCO Drill socket long type
    Use this when you want to change the size of the Morse taper or extend it. Since the drill socket has a long neck, it is convenient when there is a gap between the workpieces. When resizing the Morse taper. For extension when the work position is at the bottom.
    from S$389.90
    Min. 2 days
  6. Drill socket quenching polishing
    TAKURA KOGU SEISAKUSYO  Drill socket quenching polishing
    from S$129.90
    Min. 5 days
  7. Drill socket long type
    TRUSCO Drill socket long type
    Use this when you want to change the size of the Morse taper or extend it.
    from S$379.90
    Min. 3 days
  8. MT drill socket + hardened product
    MITSUBA SEIKO MT drill socket + hardened product
    Change MT taper. Used to extend the length.
    from S$159.90
    Min. 7 days
  9. MT drill socket
    MITSUBA SEIKO MT drill socket
    Change MT taper. Used to extend the length.
    from S$119.90
    Min. 7 days
  10. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  271  Width (mm)  32  Mass (g)  4957 
    from S$299.90
    Min. 8 days
  11. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Mass (g)  1745  Overall Length (mm)  264  Width (mm)  46 
    from S$299.90
    Min. 8 days
  12. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  158.5  Width (mm)  24  Mass (g)  246 
    from S$169.90
    Min. 8 days
  13. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  217  Width (mm)  24  Mass (g)  771 
    from S$199.90
    Min. 8 days
  14. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Mass (g)  1290  Overall Length (mm)  220  Width (mm)  46 
    from S$299.90
    Min. 8 days
  15. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  330  Mass (g)  4234  Width (mm)  64 
    from S$589.90
    Min. 8 days
  16. 99 extension bar
    Muraki 99 extension bar
    Carbide extension bar for NC spot drills.
    from S$399.90
    Min. 8 days
  17. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  195  Width (mm)  32  Mass (g)  550 
    from S$199.90
    Min. 8 days
  18. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  157  Width (mm)  18  Mass (g)  223 
    from S$169.90
    Min. 8 days
  19. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  214  Width (mm)  32  Mass (g)  700 
    from S$199.90
    Min. 8 days
  20. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Mass (g)  1630  Width (mm)  18  Overall Length (mm)  233 
    from S$299.90
    Min. 8 days
  21. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  392  Width (mm)  64  Mass (g)  7000 
    from S$899.90
    Min. 8 days
  22. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Width (mm)  18  Overall Length (mm)  233  Mass (g)  373 
    from S$169.90
    Min. 8 days
  23. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Mass (g)  1721  Width (mm)  24  Overall Length (mm)  249 
    from S$299.90
    Min. 8 days
  24. Partial firing of drill socket
    GLOBE (formerly Horiuchi) Partial firing of drill socket
    Due to the fully polished finish, both runout accuracy and taper contact are good. It is economical because it is properly hardened on the necessary parts.
    Overall Length (mm)  158.5  Width (mm)  24  Mass (g)  246 
    from S$55.99
    Min. 8 days
  25. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  173  Width (mm)  24  Mass (g)  320 
    from S$169.90
    Min. 8 days
  26. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Mass (g)  1007  Overall Length (mm)  239  Width (mm)  32 
    from S$199.90
    Min. 8 days
  27. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  358  Width (mm)  46  Mass (g)  5400 
    from S$779.90
    Min. 8 days
  28. Partial firing of drill socket
    GLOBE (formerly Horiuchi) Partial firing of drill socket
    Due to the fully polished finish, both runout accuracy and taper contact are good. It is economical because it is properly hardened on the necessary parts.
    Overall Length (mm)  192  Width (mm)  24  Mass (g)  464 
    from S$58.99
    Min. 8 days
  29. Partial firing of drill socket
    GLOBE (formerly Horiuchi) Partial firing of drill socket
    Due to the fully polished finish, both runout accuracy and taper contact are good. It is economical because it is properly hardened on the necessary parts.
    Overall Length (mm)  157  Width (mm)  18  Mass (g)  223 
    from S$55.99
    Min. 8 days
  30. Partial firing of drill socket
    GLOBE (formerly Horiuchi) Partial firing of drill socket
    Due to the fully polished finish, both runout accuracy and taper contact are good. It is economical because it is properly hardened on the necessary parts.
    Overall Length (mm)  142.5  Mass (g)  149  Width (mm)  18 
    from S$55.99
    Min. 8 days
  31. MT3xMT2  [Abrasive finish] Drill socket
    ESCO MT3xMT2 [Abrasive finish] Drill socket
    Used for machining, changing Morse taper shafts for drills, etc.
    Overall Length (mm)  196  Material  SCM415 
    from S$169.90
    Min. 2 days
  32. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Width (mm)  18  Overall Length (mm)  201  Mass (g)  680 
    from S$199.90
    Min. 8 days
  33. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  273  Mass (g)  2977  Width (mm)  64 
    from S$599.90
    Min. 8 days
  34. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Mass (g)  1440  Overall Length (mm)  239  Width (mm)  46 
    from S$299.90
    Min. 8 days
  35. Partial firing of drill socket
    GLOBE (formerly Horiuchi) Partial firing of drill socket
    Due to the fully polished finish, both runout accuracy and taper contact are good. It is economical because it is properly hardened on the necessary parts.
    Overall Length (mm)  298  Mass (g)  3284  Width (mm)  64 
    from S$459.90
    Min. 8 days
  36. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Mass (g)  2695  Overall Length (mm)  296  Width (mm)  46 
    from S$299.90
    Min. 8 days
  37. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Mass (g)  1.49  Overall Length (mm)  142.5  Width (mm)  18 
    from S$169.90
    Min. 8 days
  38. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  335 
    from S$779.90
    Min. 8 days
  39. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  298  Mass (g)  3284  Width (mm)  64 
    from S$589.90
    Min. 8 days
  40. Drill socket total quenching
    GLOBE (formerly Horiuchi) Drill socket total quenching
    Due to the total quenching and total polishing finish, durability, runout accuracy, and taper contact are all good.
    Overall Length (mm)  192  Width (mm)  24  Mass (g)  464 
    from S$169.90
    Min. 8 days
View : Grid List
Filter

Items 1 - 40 of 42

Set Ascending Direction