All Category

Cutter Arbors

View : Grid List
Filter

Items 1 - 40 of 151

Set Ascending Direction
  1. Parting Plate Bit (Bit Bit Three Sets)
    SAKAI MACHINE TOOL Parting Plate Bit (Bit Bit Three Sets)
    Used for parting and groove cutting. It is used by inserting it into the parting plate tool holder. (Total high-speed material)
    Overall Length (mm)  36.5  Material  Total high-speed wood  Width (mm)  1.8  Suitable Model  ML210、ML360  Height (mm) 
    Rating:
    95%
    from S$48.99
    Min. 2 days
  2. Milling cutter arbor
    SAKAI MACHINE TOOL Milling cutter arbor
    A tool for attaching metal saws, etc. Install a metal saw with a hole diameter of 15.875 mm.
    Hole Diameter (Φmm)  15.875  Suitable Model  ML210、ML360 
    from S$199.90
    Min. 2 days
  3. Fly cutter (with dedicated tool)
    SAKAI MACHINE TOOL Fly cutter (with dedicated tool)
    It is for attaching to a milling attachment to cut a flat surface, drill holes, etc. The shank is 10mmΦ and can be attached with a collet. With a dedicated bite (# 3445-1).
    Included Accessories  Dedicated byte (# 3445-1)  Shank Diameter (Φmm)  10 
    from S$129.90
    Min. 6 days
  4. Chuck arbor
    BIG DAISHOWA Chuck arbor
    from S$64.99
    Min. 5 days
  5. Adjustable Face Mill Arbor
    BIG DAISHOWA Adjustable Face Mill Arbor
    from S$199.90
    Min. 5 days
  6. S axis Cutter Arbor
    TAKURA KOGU SEISAKUSYO  S axis Cutter Arbor
    from S$199.90
    Min. 4 days
  7. Big Plus Face Mill Arbor Type H
    BIG DAISHOWA Big Plus Face Mill Arbor Type H
    from S$329.90
    Min. 5 days
  8. Metal soar bar
    TAKURA KOGU SEISAKUSYO  Metal soar bar
    from S$329.90
    Min. 4 days
  9. Milling Arbor (MT-2)
    Mr. Meister Milling Arbor (MT-2)
    It is a milling arbor (MT-2). It is used to perform circular sawing with a milling cutter on a mini milling machine Little Milling 1 etc. A special milling cutter is required separately.
    RoHS directive (corresponding to 10 substances)  Specification  Taper MT-2 
    from S$179.90
    Min. 6 days
  10. Milling Arbor for LittleMilling-9 (MT-3)
    Mr. Meister Milling Arbor for LittleMilling-9 (MT-3)
    It is used when slitting the material or cutting the material.
    RoHS directive (corresponding to 10 substances) 
    from S$179.90
    Min. 7 days
  11. Big Plus Face Mill Arbor Type A
    BIG DAISHOWA Big Plus Face Mill Arbor Type A
    from S$299.90
    Min. 5 days
  12. Face mill arbor
    Manyo tools Face mill arbor
    Arbor for JIS B 4113 standard front milling cutter. It can be used widely from roughing to finishing.
    RoHS directive (corresponding to 10 substances) 
    from S$499.90
    Min. 5 days
  13. S axis side cutter arbor
    TAKURA KOGU SEISAKUSYO  S axis side cutter arbor
    Dimension d (Φmm)  25.4  Dimension D (Φmm)  32  Dimension L1 (mm)  70  Hardness  HRC45~50  Material  SCM435  Runout Accuracy  Within 0.015 
    Rating:
    70%
    from S$249.90
    Min. 4 days
  14. Big Plus Face Mill Arbor Type A
    BIG DAISHOWA Big Plus Face Mill Arbor Type A
    from S$229.90
    Min. 5 days
  15. Face mill arbor
    NT Tool Face mill arbor
    Coolant can be supplied from the end face of the holder inlay to the cutter with oil hole holes.
    from S$299.90
    Min. 6 days
  16. Milling Arbor Set (MT-3)
    Mr. Meister Milling Arbor Set (MT-3)
    A set of milling cutter and arbor for the precision tabletop milling machine Little Milling 9.
    RoHS directive (corresponding to 10 substances)  Saw Blade Thickness (mm)  1.6  Inner Diameter of Saw Blade (Φmm)  16  Outer Diameter of Saw Blade (Φmm)  50  Taper  MT-3  Set Contents  Milling arbor milling cutter 
    from S$279.90
    Min. 2 days
  17. Face mill arbor type A
    BIG DAISHOWA Face mill arbor type A
    from S$249.90
    Min. 5 days
  18. Big Plus Face Mill Arbor Type H
    BIG DAISHOWA Big Plus Face Mill Arbor Type H
    from S$259.90
    Min. 5 days
  19. Smart damper face mill arbor
    BIG DAISHOWA Smart damper face mill arbor
    Dimension L (mm)  180  holder length L (mm)  180 
    from S$2,999.00
    Min. 5 days
  20. Quick Change Jacob Taper Arbor
    BIG DAISHOWA Quick Change Jacob Taper Arbor
    For drilling Φ13 or less.
    Other  Drill chuck is not included.  Jacobs Taper  JT6 
    from S$149.90
    Min. 5 days
  21. Clamp bolt for cutter arbor with oil hole
    MST Corp. Clamp bolt for cutter arbor with oil hole
    from S$19.99
    Min. 3 days
  22. Front milling arbor straight shank
    Showa Tool Front milling arbor straight shank
    W1  12.7  H3  10  C4  40  G1  M1  H4  16  W2  14  K1  C3  24  C5  23  H1  30  L1  15  31.75  C1  60  H2 
    from S$199.90
    Min. 4 days
  23. Face mill Arbor
    BIG DAISHOWA Face mill Arbor
    RoHS directive (corresponding to 10 substances) 
    from S$299.90
    Min. 5 days
  24. Big Plus Face Mill Arbor Type A
    BIG DAISHOWA Big Plus Face Mill Arbor Type A
    from S$379.90
    Min. 5 days
  25. End collar for S-axis side cutter arbor
    TAKURA KOGU SEISAKUSYO  End collar for S-axis side cutter arbor
    Suitable for  ST32×25.4×50 
    from S$29.99
    Min. 6 days
  26. Big Plus Face Mill Arbor Type H
    BIG DAISHOWA Big Plus Face Mill Arbor Type H
    from S$249.90
    Min. 5 days
  27. Face mill arbor
    BIG DAISHOWA Face mill arbor
    from S$379.90
    Min. 5 days
  28. Face mill arbor type A
    BIG DAISHOWA Face mill arbor type A
    from S$249.90
    Min. 5 days
  29. NT Shank milling arbor (main unit)
    TAKURA KOGU SEISAKUSYO  NT Shank milling arbor (main unit)
    from S$329.90
    Min. 4 days
  30. Front milling arbor for ATC (FMA)
    TAKURA KOGU SEISAKUSYO  Front milling arbor for ATC (FMA)
    from S$299.90
    Min. 4 days
  31. S axis Side cutter arbor (with collar)
    TAKURA KOGU SEISAKUSYO  S axis Side cutter arbor (with collar)
    from S$359.90
    Min. 5 days
  32. Side cutter arbor
    MST Corp. Side cutter arbor
    Tools for machining centers
    from S$389.90
    Min. 8 days
  33. Oil Hole Tsuki Cutter Arbor Strong Type [Φ63 / 66]
    MST Corp. Oil Hole Tsuki Cutter Arbor Strong Type [Φ63 / 66]
    Bolt  (Clamp) M10  Dimension W (mm)  10  Dimension H (mm)  18  Dimension D (Φmm)  22  Dimension d (Φmm)  Dimension K (mm)  Dimension C (Φmm)  60  cutter diameter  63/66  Type  Fig.1  Dimension G  M10 
    from S$2,599.00
    Min. 3 days
  34. Cutter arbor powerful type Φ40 with oil hole
    MST Corp. Cutter arbor powerful type Φ40 with oil hole
    from S$2,999.00
    Min. 8 days
  35. Milling Arbor
    OSG Milling Arbor
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$359.90
    Min. 6 days
  36. Smart damper face mill arbor
    BIG DAISHOWA Smart damper face mill arbor
    from S$1,299.00
    Min. 5 days
  37. 2-face restraint, face milling arbor type A
    Showa Tool 2-face restraint, face milling arbor type A
    50.8  75 
    from S$779.90
    Min. 4 days
  38. 2-face restraint, face milling arbor type A
    Showa Tool 2-face restraint, face milling arbor type A
    C4  50  H4  20  C5  27  H1  34  C3  28  H3  14  G1  M2  H2  W1  15.9  K1  38.1  L1  80 
    from S$779.90
    Min. 4 days
  39. Red screw arbor A100
    MST Corp. Red screw arbor A100
    Included Accessories  Coolant duct 
    from S$1,999.00
    Min. 8 days
  40. BT Shank Face Mill Arbor
    YUKIWA SEIKO BT Shank Face Mill Arbor
    from S$199.90
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 151

Set Ascending Direction