All Category

Reamers

A reamer is a cutting tool that is used to process a prepared hole that has been drilled in advance to a desired dimension, shape, and good finish with the required accuracy. Used for high-precision drilling in a variety of applications from aircraft parts to nozzles. It has a cylindrical or conical outer shape with multiple cutting edges, and is manually or machine rotated to pass through the hole. The appropriate type and cutting speed differ depending on the material to be cut, whether the cutting fluid is water-soluble or oily, and the appropriate blade reamer will be selected depending on the shape and diameter of the hole.
View : Grid List
Filter

Items 1 - 40 of 1008

Set Ascending Direction
  1. Adjustable Reamer
    F.P.TOOLS Adjustable Reamer
    The blade diameter is adjustable.
    Number of Tips  Material  SKS 
    Rating:
    83%
    from S$119.90
    Min. 2 days
  2. Hand reamer (percent)
    Okazaki Seiko Hand reamer (percent)
    Cast iron, general hole finishing of steel Uses MCO material (cobalt high speed steel) MCO material has excellent hardness, heat resistance, and wear resistance compared to the conventional high-speed (SKH9).
    Chamfer angle (°)  Abbreviation  HRM  Material  MCO material (Cobalt high speed steel)  Coating  Non-coated  Blade Shape  Straight  Helix Angle  Straight blade  Shank  Straight shank 
    from S$46.99
    Min. 4 days
  3. Carbide High Helical Short Reamer
    Okazaki Seiko Carbide High Helical Short Reamer
    Solid type Carbide helical reamer (CHR) short type
    Number of Tips  Material  Carbide  Blade Shape  Helical blade  Coating  Non-coated  Shank  Straight shank 
    Rating:
    100%
    from S$32.99
    Min. 4 days
  4. Hand reamer
    Okazaki Seiko Hand reamer
    Cast iron, general hole finishing of steel Uses MCO material (cobalt high speed steel) MCO material has excellent hardness, heat resistance, and wear resistance compared to the conventional high-speed (SKH9).
    Chamfer angle (°)  Abbreviation  HR  Material  MCO material (Cobalt high speed steel)  Coating  Non-coated  Blade Shape  Straight  Helix Angle  Straight blade  Shank  Straight shank 
    from S$32.99
    Min. 4 days
  5. Carbide powerful reamer (1/100 units)
    Okazaki Seiko Carbide powerful reamer (1/100 units)
    Blade Shape  Spiral  Shank  Straight shank 
    from S$77.99
    Min. 5 days
  6. Hand Reamer
    Okazaki Seiko Hand Reamer
    Uses MCO material.
    Material  MCO (cobalt High Speed ​​Steel)  Blade Diameter Tolerance  m5 
    Rating:
    94%
    from S$31.99
    Min. 2 days
  7. Hand Reamer
    F.P.TOOLS Hand Reamer
    The hand reamer is used to finish the hole diameter, and the tip biting part is sloped about 1 degree for better guidance. * If you order by cash on delivery, it may be shipped the next day or later.
    Blade Diameter Tolerance (mm)  0~+0.005  Material  High speed steel HSS  Coating  Non-coated  Blade Shape  Straight  Shank  Straight shank 
    Rating:
    73%
    from S$27.99
    Min. 2 days
  8. Hand Reamer
    TRUSCO Hand Reamer
    It has a loose bite corner and a shank square part, and finishes the hole after passing through a drill hole or a rough reamer with high accuracy. Originally for hand finishing, it is also used for machines for final finishing. Work Material: Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, Stai... Read More
    Material  High speed steel (HSS)  Blade Shape  Straight 
    Rating:
    100%
    from S$34.99
    Min. 2 days
  9. Taper Pin Reamer
    Okazaki Seiko Taper Pin Reamer
    Uses MCO material.
    Rating:
    78%
    from S$38.99
    Min. 2 days
  10. Tapered reamer
    ENGINEER Tapered reamer
    RoHS directive (corresponding to 10 substances)  Material  High carbon steel 
    Rating:
    89%
    from S$13.99
    Min. 2 days
  11. Spiral blade chucking reamer
    Okazaki Seiko Spiral blade chucking reamer
    Short blade type straight shank Uses MCO material (cobalt high speed steel) Left twist 20 °, bite angle 45 °
    Helix Angle (°)  20  Material  MCO material (Cobalt high speed steel)  Coating  Non-coated  Blade Shape  Spiral  Shank  Straight shank  Blade Diameter Tolerance  m5 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  12. Craft reamer
    Amon Industry Craft reamer
    You can make a hole of about 5 to 23 mm in the resin part. For mounting switches, etc. A hole is made cleanly.
    Overall Length (mm)  160 
    Rating:
    90%
    from S$16.99
    Min. 2 days
  13. Hand reamer (percent)
    Okazaki Seiko Hand reamer (percent)
    Material  MCO material (Cobalt high speed steel)  Blade Shape  Straight  Helix Angle (°)  Straight blade 
    Rating:
    100%
    from S$48.99
    Min. 2 days
  14. Hand reamer (percent)
    Okazaki Seiko Hand reamer (percent)
    Blade Diameter Tolerance (mm)  +0.005~ 0  Number of Tips  Material  MCO (cobalt High Speed ​​Steel)  Blade Shape  Straight  Helix Angle (°)  Straight blade 
    Rating:
    100%
    from S$48.99
    Min. 2 days
  15. Adjustable reamer
    F.P.TOOLS Adjustable reamer
    The blade diameter is adjustable.
    Material  SKS 
    Rating:
    100%
    from S$119.90
    Min. 2 days
  16. Hand reamer (percent)
    Okazaki Seiko Hand reamer (percent)
    Number of Tips  Material  MCO material (Cobalt high speed steel)  Blade Shape  Straight  Helix Angle (°)  Straight blade 
    from S$48.99
    Min. 2 days
  17. Machine reamer
    Okazaki Seiko Machine reamer
    The bite part is 45 ° and has a long vanish part blade. The shank is an MT (mall taper) shank. Machine reamers are used to finish hole diameters.
    Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Blade Diameter Tolerance  m5 
    Rating:
    80%
    from S$87.99
    Min. 2 days
  18. Machine Reamer
    Okazaki Seiko Machine Reamer
    The bite part is 45 ° and has a long vanish part blade. The shank is an MT (mall taper) shank. Machine reamers are used to finish hole diameters.
    Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Blade Diameter Tolerance  m5 
    from S$169.90
    Min. 2 days
  19. Hand reamer
    F.P.TOOLS Hand reamer
    The hand reamer is used to finish the hole diameter, and the tip biting part is sloped about 1 degree for better guidance. * If you order by cash on delivery, it may be shipped the next day or later.
    Shank Diameter Tolerance (mm)  -0.02~-0.05  Blade Diameter Tolerance (mm)  0~+0.005  Overall Length L (mm)  115  Chamfering Length T (mm)  12  Shank Length l2 (mm)  42  Number of Tips  Blade Length l1 (mm)  60  Shank Diameter d (Φmm)  Material  High speed steel HSS  Coating  Non-coated  Blade Shape  Straight  Shank  Straight shank 
    Rating:
    100%
    from S$48.99
    Min. 2 days
  20. Tapered pin reamer
    Okazaki Seiko Tapered pin reamer
    Used for taper pin hole machining Uses MCO material (cobalt high speed steel) MCO material has excellent hardness, heat resistance, and wear resistance compared to the conventional high-speed (SKH9). * Tip bite angle 45 degrees
    Chamfer angle (°)  45 (tip)  Material  MCO material (Cobalt high speed steel)  Coating  Non-coated  Blade Shape  Straight  Helix Angle  Straight blade  Shank  Straight shank  Abbreviation  TPR 
    from S$38.99
    Min. 2 days
  21. FP Gold Reamer Straight Blade 1.0-14.0
    F.P.TOOLS FP Gold Reamer Straight Blade 1.0-14.0
    Due to the TiN coating, the cutting speed and durability are more than double that of conventional high-speed machines and chucking reamers. Excellent roundness and surface roughness. The shank diameter uses an end mill shank. * If you order by cash on delivery, it may be shipped the next day or ... Read More
    Blade Diameter Tolerance (mm)  0~+0.005  Material  High speed steel HSS  Blade Shape  Straight  Shank  Straight shank  Surface Treatment  TiN coating  Coating  TiN coating  Shank Diameter Tolerance  h7 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  22. Hand reamer (percent)
    Okazaki Seiko Hand reamer (percent)
    Number of Tips  Material  MCO material (Cobalt high speed steel)  Blade Shape  Straight  Helix Angle (°)  Straight blade 
    Rating:
    60%
    from S$67.99
    Min. 2 days
  23. Carbide short reamer
    Okazaki Seiko Carbide short reamer
    Blade Shape  Straight  Helix Angle (°)  Straight blade  Shank  Straight shank 
    Rating:
    100%
    from S$35.99
    Min. 2 days
  24. Machine reamer
    MonotaRO Machine reamer
    * Do not use for anything other than its intended purpose.
    Material  High speed steel HSS 
    Rating:
    60%
    from S$49.99
    Min. 2 days
  25. Hand reamer
    F.P.TOOLS Hand reamer
    The hand reamer is used to finish the hole diameter, and the tip biting part is sloped about 1 degree for better guidance. * If you order by cash on delivery, it may be shipped the next day or later.
    Blade Diameter Tolerance (mm)  0~+0.005  Chamfering Length T (mm)  10  Overall Length L (mm)  100  Shank Length l2 (mm)  38  Blade Length l1 (mm)  50  Shank Diameter d (Φmm)  Number of Tips  Material  High speed steel HSS  Coating  Non-coated  Blade Shape  Straight  Shank  Straight shank 
    Rating:
    90%
    from S$38.99
    Min. 2 days
  26. Hex axis Taper reamer
    Mitsutomo Hex axis Taper reamer
    Number of Tips  Overall Length (mm)  130  Blade Diameter (mm)  3~11  Blade Length (mm)  80  Trusco Part No.  859-2325  Shank  Taper shank 
    from S$25.99
    Min. 2 days
  27. Machine reamer
    Okazaki Seiko Machine reamer
    Number of Tips  Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Shank Diameter (Φmm)  MT1  Blade Shape  Straight  Blade Diameter Tolerance  m5 
    from S$77.99
    Min. 2 days
  28. Hand reamer
    F.P.TOOLS Hand reamer
    The hand reamer is used to finish the hole diameter, and the tip biting part is sloped about 1 degree for better guidance. * If you order by cash on delivery, it may be shipped the next day or later.
    Blade Diameter Tolerance (mm)  0~+0.005  Chamfering Length T (mm)  10  Shank Length l2 (mm)  35  Blade Length l1 (mm)  45  Shank Diameter d (Φmm)  Number of Tips  Overall Length L (mm)  90  Material  High speed steel HSS  Coating  Non-coated  Blade Shape  Straight  Shank  Straight shank 
    from S$35.99
    Min. 2 days
  29. Spiral hand reamer
    Okazaki Seiko Spiral hand reamer
    Cast iron, general hole finishing of steel Uses MCO material (cobalt high speed steel) MCO material has excellent hardness, heat resistance, and wear resistance compared to the conventional high-speed (SKH9).
    Chamfer angle (°)  Helix Angle  Left twist 8 degrees  Material  MCO material (Cobalt high speed steel)  Coating  Non-coated  Abbreviation  SPHR  Blade Shape  Spiral  Shank  Straight shank 
    Rating:
    100%
    from S$39.99
    Min. 4 days
  30. Hand reamer
    F.P.TOOLS Hand reamer
    The hand reamer is used to finish the hole diameter, and the tip biting part is sloped about 1 degree for better guidance. * If you order by cash on delivery, it may be shipped the next day or later.
    Shank Diameter Tolerance (mm)  -0.02~-0.05  Blade Diameter Tolerance (mm)  0~+0.005  Shank Length l2 (mm)  23  Shank Diameter d (Φmm)  Blade Length l1 (mm)  40  Number of Tips  Overall Length L (mm)  72  Chamfering Length T (mm)  Material  High speed steel HSS  Coating  Non-coated  Blade Shape  Straight  Shank  Straight shank 
    from S$35.99
    Min. 2 days
  31. Long hand reamer
    TRUSCO Long hand reamer
    It has a loose bite corner and a shank square part, and finishes the hole after passing through a drill hole or a rough reamer with high accuracy. Originally for hand finishing, it is also used for machines for final finishing. Ideal for deep hole drilling. Work Material: Cast Iron, Carbon Steel,... Read More
    Material  High speed steel (HSS)  Blade Shape  Straight  Shank  Taper shank 
    from S$119.90
    Min. 2 days
  32. Carbide short reamer (1/100 units)
    Okazaki Seiko Carbide short reamer (1/100 units)
    Blade Shape  Straight  Helix Angle (°)  Straight blade  Shank  Straight shank 
    Rating:
    80%
    from S$35.99
    Min. 4 days
  33. Hand reamer
    F.P.TOOLS Hand reamer
    The hand reamer is used to finish the hole diameter, and the tip biting part is sloped about 1 degree for better guidance. * If you order by cash on delivery, it may be shipped the next day or later.
    Shank Diameter Tolerance (mm)  -0.02~-0.05  Blade Diameter Tolerance (mm)  0~+0.005  Shank Length l2 (mm)  30  Shank Diameter d (Φmm)  Blade Length l1 (mm)  40  Number of Tips  Overall Length L (mm)  80  Chamfering Length T (mm)  Material  High speed steel HSS  Coating  Non-coated  Blade Shape  Straight  Shank  Straight shank 
    from S$35.99
    Min. 4 days
  34. Hand reamer
    F.P.TOOLS Hand reamer
    * If you order by cash on delivery, it may be shipped the next day or later.
    Number of Tips  Blade Shape  Straight 
    from S$45.99
    Min. 163 days
  35. Chucking reamer straight shank
    Okazaki Seiko Chucking reamer straight shank
    Chamfer angle (°)  45  Material  MCO material (Cobalt high speed steel)  Coating  Non-coated  Blade Shape  Straight  Helix Angle (°)  Straight blade  Shank  Straight shank 
    Rating:
    87%
    from S$64.99
    Min. 4 days
  36. Bridge Reamer
    Okazaki Seiko Bridge Reamer
    Uses MCO material Ideal for large reamer charges
    Number of Tips  Tip Angle (°)  55 (with food)  Material  MCO (cobalt High Speed ​​Steel)  Blade Shape  Straight  Shank  Taper shank  Blade Diameter Tolerance  h8 
    from S$129.90
    Min. 4 days
  37. High Helical Reamer
    F.P.TOOLS High Helical Reamer
    * If you order by cash on delivery, it may be shipped the next day or later.
    Blade Diameter Tolerance (mm)  0~+0.005  Material  H.S.S.-Co  Coating  Non-coated  Blade Shape  Spiral 
    from S$48.99
    Min. 4 days
  38. Hand reamer
    F.P.TOOLS Hand reamer
    * If you order by cash on delivery, it may be shipped the next day or later.
    Number of Tips 
    from S$37.99
    Min. 5 days
  39. Bridge reamer
    Okazaki Seiko Bridge reamer
    Used when the reamer fee is large Uses MCO material (cobalt high speed steel) MCO material has excellent hardness, heat resistance, and wear resistance compared to the conventional high-speed (SKH9).
    Chamfer angle (°)  55 (tip)  Abbreviation  BR  Material  MCO material (Cobalt high speed steel)  Shank  MT (Morse Taper) Shank  Coating  Non-coated  Blade Shape  Straight  Helix Angle  Straight blade 
    from S$97.99
    Min. 4 days
  40. Bridge reamer
    Okazaki Seiko Bridge reamer
    Uses MCO material Ideal for large reamer charges
    Shank (MT No.)  Tip Angle (°)  55 (with food)  Material  MCO (cobalt High Speed ​​Steel)  Blade Shape  Straight  Shank  Taper shank  Blade Diameter Tolerance  h8 
    from S$259.90
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 1008

Set Ascending Direction