All Category

Machine Reamers

A machine reamer is a cutting tool that greatly widens holes that have been drilled in advance or adjusts the shape of the holes. Because it is used for drilling, it is used in various places such as aircraft parts and nozzles. A thing that moves by power is called a machine reamer, while a thing that turns by hand is called a hand reamer. There are types for roughing and finishing, and the appropriate reamer differs depending on the size, shape, and material of the hole, so it is important to select a reamer that suits each situation.

Other Related Pages

View : Grid List
Filter

Items 1 - 40 of 104

Set Ascending Direction
  1. Machine reamer
    Okazaki Seiko Machine reamer
    The bite part is 45 ° and has a long vanish part blade. The shank is an MT (mall taper) shank. Machine reamers are used to finish hole diameters.
    Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Blade Diameter Tolerance  m5 
    Rating:
    80%
    from S$87.99
    Min. 2 days
  2. Machine Reamer
    Okazaki Seiko Machine Reamer
    The bite part is 45 ° and has a long vanish part blade. The shank is an MT (mall taper) shank. Machine reamers are used to finish hole diameters.
    Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Blade Diameter Tolerance  m5 
    from S$169.90
    Min. 2 days
  3. Machine reamer
    MonotaRO Machine reamer
    * Do not use for anything other than its intended purpose.
    Material  High speed steel HSS 
    Rating:
    60%
    from S$49.99
    Min. 2 days
  4. Machine reamer
    Okazaki Seiko Machine reamer
    Number of Tips  Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Shank Diameter (Φmm)  MT1  Blade Shape  Straight  Blade Diameter Tolerance  m5 
    from S$77.99
    Min. 2 days
  5. Machine reamer
    Okazaki Seiko Machine reamer
    Cast iron, general hole finishing of steel Uses MCO material (cobalt high speed steel) MCO material has excellent hardness, heat resistance, and wear resistance compared to the conventional high-speed (SKH9).
    Chamfer angle (°)  45  Material  MCO material (Cobalt high speed steel)  Abbreviation  MR  Shank  Morse taper shank  Coating  Non-coated  Blade Shape  Straight  Helix Angle  Straight blade 
    from S$85.99
    Min. 4 days
  6. Machine reamer
    Okazaki Seiko Machine reamer
    The bite part is 45 ° and has a long vanish part blade. The shank is an MT (mall taper) shank. Machine reamers are used to finish hole diameters.
    Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Blade Diameter Tolerance  m5 
    from S$359.90
    Min. 2 days
  7. Machine reamer
    Okazaki Seiko Machine reamer
    Chamfer angle (°)  45  Material  MCO material (Cobalt high speed steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Helix Angle (°)  Straight blade 
    from S$109.90
    Min. 4 days
  8. Spiral machine reamer
    Okazaki Seiko Spiral machine reamer
    Cast iron, general hole finishing of steel Uses MCO material (cobalt high speed steel) MCO material has excellent hardness, heat resistance, and wear resistance compared to the conventional high-speed (SKH9).
    Chamfer angle (°)  45  Helix Angle  Left twist 8 degrees  Material  MCO material (Cobalt high speed steel)  Shank  Morse taper shank  Coating  Non-coated  Abbreviation  SPMR  Blade Shape  Spiral 
    from S$109.90
    Min. 4 days
  9. Spiral blade machine reamer
    Okazaki Seiko Spiral blade machine reamer
    Chamfer angle (°)  45  Helix Angle (°)  Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Spiral 
    from S$109.90
    Min. 4 days
  10. 0.33-2.0mm precision reamer (replacement type)
    ESCO 0.33-2.0mm precision reamer (replacement type)
    Esco Part No.  EA824DA-16  Blade Length (mm)  74 
    from S$149.90
    Min. 6 days
  11. Reamer HS Spiral SUR
    EIKO Reamer HS Spiral SUR
    Coating  Non-coated  Blade Shape  Right blade left twist  Material  SKH56  Shank  Straight shank 
    from S$169.90
    Min. 5 days
  12. Machine reamer
    Okazaki Seiko Machine reamer
    Chamfer angle (°)  45  Material  MCO material (Cobalt high speed steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Helix Angle (°)  Straight blade 
    from S$1,199.00
    Min. 5 days
  13. Long blade machine reamer
    Okazaki Seiko Long blade machine reamer
    Chamfer angle (°)  45  Material  MCO material (Cobalt high speed steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Helix Angle (°)  Straight blade 
    from S$279.90
    Min. 4 days
  14. Machine reamer (G2)
    Asahi Tools Machine reamer (G2)
    Blade Shape  Straight  Shank  Taper shank 
    from S$129.90
    Min. 5 days
  15. Machine reamer
    Mierasen Machine reamer
    Widely used for machinery, it has a 45 ° bite angle and a long vanish blade, and the shank is a Morse taper shank. Work Material: Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel, Aluminum Alloy.
    Material  High speed steel (HSS)  Blade Shape  Straight  Shank  Taper shank 
    from S$119.90
    Min. 2 days
  16. Long blade machine reamer
    Okazaki Seiko Long blade machine reamer
    Ideal for deep hole drilling Uses MCO material (cobalt high speed steel) MCO material has excellent hardness, heat resistance, and wear resistance compared to the conventional high-speed (SKH9).
    Chamfer angle (°)  45  Abbreviation  LMR  Material  MCO material (Cobalt high speed steel)  Shank  Morse taper shank  Coating  Non-coated  Blade Shape  Straight  Helix Angle  Straight blade 
    from S$279.90
    Min. 4 days
  17. Reamer HS Straight MR3
    TAIYO-TOOL Reamer HS Straight MR3
    Material  SKH51  Blade Shape  Straight  Shank  Taper shank 
    from S$169.90
    Min. 8 days
  18. Reamer HS Spiral ST
    SK SHINKAI Reamer HS Spiral ST
    Material  HSS-CO  Blade Shape  Spiral  Shank  Straight shank 
    from S$58.99
    Min. 8 days
  19. Machine reamer CSPR
    EIKO Machine reamer CSPR
    Blade Shape  Spiral  Shank  Straight shank  Coating  TiCN2 coating  Material  Ultra fine particles 
    from S$99.90
    Min. 5 days
  20. Reamer HS Straight MR8
    TAIYO-TOOL Reamer HS Straight MR8
    Material  SKH51  Blade Shape  Straight  Shank  Taper shank 
    from S$149.90
    Min. 8 days
  21. Reamer HS Spiral STO
    SK SHINKAI Reamer HS Spiral STO
    Material  HSS-CO  Blade Shape  Spiral  Shank  Straight shank 
    from S$77.99
    Min. 8 days
  22. Reamer HS Straight SP-MR
    TAIYO-TOOL Reamer HS Straight SP-MR
    Material  SKH51  Blade Shape  Straight  Shank  Taper shank 
    from S$169.90
    Min. 8 days
  23. Reamer HS Spiral FHR
    SK SHINKAI Reamer HS Spiral FHR
    Material  HAP40  Blade Shape  Spiral  Shank  Straight shank 
    from S$129.90
    Min. 8 days
  24. 14.0x190mm / MT-1 machine reamer
    ESCO 14.0x190mm / MT-1 machine reamer
    Blade Diameter (Φmm)  14  Overall Length (mm)  190  Number of Tips  Blade Length (mm)  75  Material  Cobalt heiss  Esco Part No.  EA827HV-12  Blade Shape  Straight  Shank  Taper shank 
    from S$149.90
    Min. 6 days
  25. Machine reamer
    No Brand Machine reamer
    Widely used for machinery, it has a 45 ° bite angle and a long vanish blade, and the shank is a Morse taper shank. Work Material: Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel, Aluminum Alloy.
    Blade Shape  Straight 
    from S$119.90
    Min. 2 days
  26. Spiral blade machine reamer
    Okazaki Seiko Spiral blade machine reamer
    Chamfer angle (°)  45  Helix Angle (°)  Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Spiral 
    from S$279.90
    Min. 5 days
  27. Reamer HS Straight MR2
    TAIYO-TOOL Reamer HS Straight MR2
    Material  SKH51  Blade Shape  Straight  Shank  Taper shank 
    from S$259.90
    Min. 8 days
  28. Reamer HS Straight MR5
    EIKO Reamer HS Straight MR5
    Shank  MT (Morse Taper) Shank  Material  SKH51  Blade Shape  Straight 
    from S$129.90
    Min. 5 days
  29. 9.0x160mm / MT-1 machine reamer
    ESCO 9.0x160mm / MT-1 machine reamer
    Overall Length (mm)  160  Number of Tips  Blade Length (mm)  70  Blade Diameter (Φmm)  Material  Cobalt heiss  Esco Part No.  EA827HV-7  Blade Shape  Straight  Shank  Taper shank 
    from S$129.90
    Min. 6 days
  30. Machine reamer
    Okazaki Seiko Machine reamer
    The bite part is 45 ° and has a long vanish part blade. The shank is an MT (mall taper) shank. The material is MCO Cobalt Highs (equivalent to SKH55). Machine reamers are used to finish hole diameters.
    Number of Tips  12  Blade Length  180  Overall Length  385  Blade Diameter  50  Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Shank Diameter (Φmm)  MT5  Blade Shape  Straight 
    from S$1,299.00
    Min. 5 days
  31. Machine reamer
    Okazaki Seiko Machine reamer
    Chamfer angle (°)  45  Material  MCO material (Cobalt high speed steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Helix Angle (°)  Straight blade 
    from S$469.90
    Min. 5 days
  32. 20.0x230mm / MT-2 machine reamer
    ESCO 20.0x230mm / MT-2 machine reamer
    Blade Length (mm)  110  Blade Diameter (Φmm)  20  Overall Length (mm)  230  Number of Tips  Material  Cobalt heiss  Esco Part No.  EA827HV-18  Blade Shape  Straight  Shank  Taper shank 
    from S$239.90
    Min. 6 days
  33. Reamer 830 head
    SANDVIK Reamer 830 head
    Shank Diameter (Φmm)  16  Blade Diameter (Φmm)  23  Overall Length (mm)  25.85  Number of Tips  Trusco Part No.  606-8413  Material  P10R (No brazing cermet)  Blade Shape  Spiral  Shank  Straight shank 
    from S$679.90
    Min. 33 days
  34. Speed reamer MT shank
    Okazaki Seiko Speed reamer MT shank
    High-speed rotation and high feed are possible. Special surface treatment. Uses MCO material (cobalt high speed steel).
    Helix Angle (°)  Left 30  Shank  MT (Morse Taper) Shank  Surface Treatment  Nitriding treatment  Blade Shape  Spiral 
    from S$119.90
    Min. 5 days
  35. Reamer HS Spiral SURN
    EIKO Reamer HS Spiral SURN
    Helix Angle (°)  25  Coating  Non-coated  Blade Shape  Right blade left twist  Material  SKH56  Shank  Straight shank 
    from S$179.90
    Min. 5 days
  36. Reamer HS Straight MR3
    EIKO Reamer HS Straight MR3
    Shank  MT (Morse Taper) Shank  Material  SKH51  Blade Shape  Straight 
    from S$159.90
    Min. 5 days
  37. 7.0x140mm / MT-1 machine reamer
    ESCO 7.0x140mm / MT-1 machine reamer
    Overall Length (mm)  140  Blade Length (mm)  55  Number of Tips  Blade Diameter (Φmm)  Material  Cobalt heiss  Esco Part No.  EA827HV-5  Blade Shape  Straight  Shank  Taper shank 
    from S$129.90
    Min. 6 days
  38. Reamer HS Spiral SP-SUR
    EIKO Reamer HS Spiral SP-SUR
    Helix Angle (°)  12  Coating  Non-coated  Blade Shape  Right blade right twist  Material  SKH56  Shank  Straight shank 
    from S$279.90
    Min. 5 days
  39. Reamer HS Straight MR4
    TAIYO-TOOL Reamer HS Straight MR4
    Material  SKH51  Blade Shape  Straight  Shank  Taper shank 
    from S$149.90
    Min. 8 days
  40. Machine reamer
    Okazaki Seiko Machine reamer
    The bite part is 45 ° and has a long vanish part blade. The shank is an MT (mall taper) shank. The material is MCO Cobalt Highs (equivalent to SKH55). Machine reamers are used to finish hole diameters.
    Number of Tips  12  Material  MCO (cobalt High Speed ​​Steel)  Shank  MT (Morse Taper) Shank  Blade Shape  Straight  Blade Diameter Tolerance  m5 
    from S$749.90
    Min. 5 days
View : Grid List
Filter

Items 1 - 40 of 104

Set Ascending Direction