All Category

Side Milling Cutters

View : Grid List
Filter

Items 1 - 40 of 193

Set Ascending Direction
  1. Side cutter
    Okazaki Seiko Side cutter
    There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
    Hole Diameter d (Φmm)  25.4  Outer Diameter D (Φmm)  75  Material  MCO (cobalt High Speed ​​Steel) 
    from S$119.90
    Min. 3 days
  2. Carbide eggplant cutter
    STAR-M Carbide eggplant cutter
    6 types of work (R surface processing, curved surface processing, cutting processing, grooving processing, accurate grooving processing, rough cutting) can be done at will. Carbide blade can be used 360 °. Can be attached to a disc grinder with an outer diameter of 100 mm / 125 mm. Shaving (rough... Read More
    Outer Dia. x Inner Dia. (Φmm)  100×22  Appropriate number of revolutions (rev / min)  15000 / or less  Hole Diameter (Φmm)  22  Number of Tips  Blade Thickness (mm)  Material (Blade)  Carbide  Material (Main Unit)  Ordinary steel  Included Accessories  Torx wrench  Material to be cut  Wood / hardwood 
    from S$229.90
    Min. 2 days
  3. Side cutter
    Okazaki Seiko Side cutter
    There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
    Hole Diameter d (Φmm)  25.4  Outer Diameter D (Φmm)  75  Material  MCO (cobalt High Speed ​​Steel) 
    Rating:
    100%
    from S$109.90
    Min. 2 days
  4. Suriwari Milling
    Okazaki Seiko Suriwari Milling
    from S$24.99
    Min. 4 days
  5. Chips and screws for carbide agri-cutter
    STAR-M Chips and screws for carbide agri-cutter
    If the blade is worn, rotate the tip before use. Please purchase this new tip when you turn it 360 degrees and use it up. Carbide Egli Cutter Replacement Tip and Screw
    Suitable for  For Aegli Cutter No.560  Set Contents  4 tips / screws 
    from S$64.99
    Min. 2 days
  6. Side cutter
    Okazaki Seiko Side cutter
    There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
    Outer Diameter D (Φmm)  100  Hole Diameter d (Φmm)  25.4  Material  MCO (cobalt High Speed ​​Steel) 
    from S$179.90
    Min. 2 days
  7. Side cutter
    Okazaki Seiko Side cutter
    There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
    Outer Diameter D (Φmm)  100  Hole Diameter d (Φmm)  25.4  Material  MCO (cobalt High Speed ​​Steel) 
    from S$229.90
    Min. 3 days
  8. Professional Guard for Carbide Egli Cutters
    STAR-M Professional Guard for Carbide Egli Cutters
    When using the Eguri Cutter series, set the safety protection cover / Proguard before use. You can reduce the scattering of wood chips during work. Can be attached to a 100 mm disc grinder with an auxiliary handle. Protective cover to be attached to the Egli Cutter series
    Suitable Tool  Disc grinder  Suitable for  For Aegli Cutter No.560  Material (Main Unit)  Resin 
    from S$76.99
    Min. 4 days
  9. Carbide aegli cutter spacer
    STAR-M Carbide aegli cutter spacer
    Spacer that fits into the center hole of the main body (for replacement)
    Suitable for  For Aegli Cutter No.560 
    from S$3.29
    Min. 4 days
  10. Side cutter
    Okazaki Seiko Side cutter
    There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
    Outer Diameter D (Φmm)  125  Hole Diameter d (Φmm)  25.4  Material  MCO (cobalt High Speed ​​Steel) 
    from S$299.90
    Min. 3 days
  11. Aegli Cutter Chainsaw
    STAR-M Aegli Cutter Chainsaw
    For rounded surface processing, cutting, chamfering, and grooving.
    Size (mm)  107  Outer Dia. x Blade Thickness x Inner Dia. (mm)  107×6×20  Hole Diameter (Φmm)  20  Suitable Material  General wood, ice 
    from S$77.99
    Min. 3 days
  12. Side cutter
    Okazaki Seiko Side cutter
    MCO tool grooving, step cutting, side cutting Uses MCO material (cobalt high speed steel).
    Abbreviation  SC  Helix Angle  Straight blade 
    from S$109.90
    Min. 4 days
  13. Side cutter
    Fukuda Seiko (FKD) Side cutter
    from S$129.90
    Min. 13 days
  14. Carbide side cutter G80
    Okazaki Seiko Carbide side cutter G80
    Carbide tool tip material is G80 (for cast iron and non-ferrous metals)
    Abbreviation  BSCG 
    from S$279.90
    Min. 4 days
  15. Side cutter
    Okazaki Seiko Side cutter
    There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
    Outer Diameter D (Φmm)  150  Hole Diameter d (Φmm)  25.4  Material  MCO (cobalt High Speed ​​Steel) 
    from S$489.90
    Min. 4 days
  16. Side cutter
    Okazaki Seiko Side cutter
    Hole Diameter d (Φmm)  25.4  Blade Diameter D (Φmm)  75  Material  MCO (cobalt High Speed ​​Steel)  Helix Angle (°)  Right angle 
    from S$119.90
    Min. 5 days
  17. Dedicated wrench for cemented carbide grinder
    STAR-M Dedicated wrench for cemented carbide grinder
    Used when replacing the tip (for replacement)
    Suitable for  For Aegli Cutter No.560 
    from S$9.59
    Min. 4 days
  18. Side cutter
    Okazaki Seiko Side cutter
    Hole Diameter d (Φmm)  25.4  Blade Diameter D (Φmm)  250  Material  MCO (cobalt High Speed ​​Steel)  Helix Angle (°)  Right angle 
    from S$1,599.00
    Min. 5 days
  19. Side cutter
    Okazaki Seiko Side cutter
    Hole Diameter d (Φmm)  25.4  Blade Diameter D (Φmm)  60  Material  MCO (cobalt High Speed ​​Steel)  Helix Angle (°)  Right angle 
    from S$109.90
    Min. 5 days
  20. Side cutter
    Okazaki Seiko Side cutter
    There are blades on the outer circumference and sides, and it is used for grooving and side cutting. The material is MCO Cobalt Highs (equivalent to SKH55).
    Outer Diameter D (Φmm)  200  Hole Diameter d (Φmm)  25.4  Number of Tips  40  Material  MCO (cobalt High Speed ​​Steel) 
    from S$979.90
    Min. 5 days
  21. Side cutter
    Fukuda Seiko (FKD) Side cutter
    from S$119.90
    Min. 5 days
  22. Houndstooth side cutter
    Fukuda Seiko (FKD) Houndstooth side cutter
    from S$389.90
    Min. 5 days
  23. Cutter
    ISCAR Cutter
    RoHS directive (corresponding to 10 substances)  Mounting Diameter (Φmm)  25.4  Effective Diameter (Φmm)  76 
    from S$1,299.00
    Min. 5 days
  24. Side cutter
    Okazaki Seiko Side cutter
    Blade Diameter D (Φmm)  175  Hole Diameter d (Φmm)  31.75  Material  MCO (cobalt High Speed ​​Steel)  Helix Angle (°)  Right angle 
    from S$779.90
    Min. 5 days
  25. Houndstooth side cutter (G2)
    Asahi Tools Houndstooth side cutter (G2)
    Hole Diameter (Φmm)  25.4 
    from S$359.90
    Min. 5 days
  26. Side cutter SN SLOTTING
    Kennametal Side cutter SN SLOTTING
    Uses 4 corners. For narrow grooving
    dimension THUB (mm)  12 
    from S$1,499.00
    Min. 10 days
  27. Side cutter
    Okazaki Seiko Side cutter
    Blade Diameter D (Φmm)  125  Hole Diameter d (Φmm)  25.4  Material  MCO (cobalt High Speed ​​Steel)  Helix Angle (°)  Right angle 
    from S$329.90
    Min. 5 days
  28. Cutter
    SANDVIK Cutter
    CoroMill 331 is a versatile side cutter for high chip evacuation and high precision grooving.
    from S$1,999.00
    Min. 7 days
  29. Cutter
    SANDVIK Cutter
    from S$3,899.00
    Min. 4 days
  30. Cutter
    ISCAR Cutter
    Mounting Diameter (Φmm)  10  Effective Diameter (Φmm)  63 
    from S$1,099.00
    Min. 5 days
  31. Cutter
    ISCAR Cutter
    RoHS directive (corresponding to 10 substances)  Effective Diameter (Φmm)  100  Mounting Diameter (Φmm)  32 
    from S$1,299.00
    Min. 5 days
  32. Cutter
    ISCAR Cutter
    Effective Diameter (Φmm)  350 
    from S$2,999.00
    Min. 5 days
  33. Staggered T slot cutter
    Fukuda Seiko (FKD) Staggered T slot cutter
    from S$259.90
    Min. 5 days
  34. Side cutter
    Okazaki Seiko Side cutter
    Hole Diameter d (Φmm)  25.4  Blade Diameter D (Φmm)  80  Material  MCO (cobalt High Speed ​​Steel)  Helix Angle (°)  Right angle 
    from S$199.90
    Min. 5 days
  35. Cutter
    ISCAR Cutter
    Effective Diameter (Φmm)  80 
    from S$1,199.00
    Min. 32 days
  36. Side cutter insert LNEQ-R
    Kennametal Side cutter insert LNEQ-R
    Insert for LN groove cutter. For roughing. 4-corner specifications
    Dimension LI (mm)  12.7  Square Size (mm)  0.4  Number of cutting edges  Width W (mm)  9.52 
    from S$97.99
    Min. 10 days
  37. Cutter
    ISCAR Cutter
    from S$1,299.00
    Min. 5 days
  38. Slotting cutter
    OSG Slotting cutter
    from S$1,299.00
    Min. 5 days
  39. Cutter
    SANDVIK Cutter
    CoroMill 331 is a versatile side cutter for high chip evacuation and high precision grooving.
    from S$3,899.00
    Min. 4 days
  40. CoroMill 495 cutter
    SANDVIK CoroMill 495 cutter
    Chamfering cutter A wide variety of cutters For chamfering
    Trusco Part No.  816-3595 
    from S$669.90
    Min. 3 days
View : Grid List
Filter

Items 1 - 40 of 193

Set Ascending Direction