All Category

Chuck Jaws

Claws are used for molding chucks attached to lathes. There are variations depending on the type and size, such as scrolling and hydraulic or pneumatic. Basically, the nail is used with one set of three, so you can purchase what you sell as a set of three. Most of them are not used in general households, but are used for business purposes, but they are often used when drilling or cutting with a lathe, and are also consumables, so frequent checks are required. It becomes.
View : Grid List
Filter

Items 1 - 40 of 189

Set Ascending Direction
  1. Raw nail for Kitagawa
    MonotaRO Raw nail for Kitagawa
    * Do not use for any purpose other than its intended purpose.
    Material  S50C  Dimension E (mm) 
    Rating:
    89%
    from S$46.99
    Min. 2 days
  2. Kitagawa Nail (Hydraulic / Pneumatic) HO
    KATO Kitagawa Nail (Hydraulic / Pneumatic) HO
    Since it is necessary to process according to the shape of the material, we use S50C, which is easy to correct and cut. It is also used for general-purpose lathes, NC lathes, machining centers, drilling machines, milling cutters, etc.
    Material  S50C  Teeth Spacing  1.5 
    Rating:
    20%
    from S$59.99
    Min. 2 days
  3. Raw nail (for scroll) for sole (empire chuck)
    IZS Raw nail (for scroll) for sole (empire chuck)
    Dimension E (mm)  Type  For scrolling  Material  S45C 
    from S$74.99
    Min. 2 days
  4. Kitagawa raw nail (for scroll chuck) SK
    KATO Kitagawa raw nail (for scroll chuck) SK
    Since it is necessary to process according to the shape of the material, we use S50C, which is easy to correct and cut. It is also used for general-purpose lathes, NC lathes, machining centers, drilling machines, milling cutters, etc.
    Shape  Material  S50C  Dimension E (mm)  Dimension F (mm)  3.5 
    Rating:
    60%
    from S$69.99
    Min. 2 days
  5. Iron raw nails for Kitagawa HO
    ARM SANGYO Iron raw nails for Kitagawa HO
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$87.99
    Min. 2 days
  6. Iron claw for Kitagawa scroll chuck
    ARM SANGYO Iron claw for Kitagawa scroll chuck
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$89.99
    Min. 2 days
  7. Iron raw nails for Kitagawa B
    ARM SANGYO Iron raw nails for Kitagawa B
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$86.99
    Min. 3 days
  8. Kitagawa raw nail (for scroll) SK
    IZS Kitagawa raw nail (for scroll) SK
    Material  S45C  Dimension E (mm) 
    Rating:
    53%
    from S$67.99
    Min. 2 days
  9. Hard Jaw
    Kitagawa Iron Works Hard Jaw
    * If you order by cash on delivery, it may be shipped the next day or later.
    from S$459.90
    Min. 2 days
  10. HO / HO Small Diameter
    GiGA SELECTION HO / HO Small Diameter
    Material  S45C 
    from S$46.99
    Min. 4 days
  11. High Claw
    IZS High Claw
    It is a high claw of the chuck for Kitagawa ironworks. It is processed and used depending on the intended use.
    Dimension D (mm)  14  Dimension B (mm)  36  Dimension A (mm)  90  Dimension F (mm)  25  Material  S45C  Dimension E (mm)  Dimension G (mm)  45  Teeth Spacing  1.5 
    from S$109.90
    Min. 2 days
  12. Scroll Chuck Hard Jaw
    Kitagawa Iron Works Scroll Chuck Hard Jaw
    Dimension T6 (mm)  7.94  Maximum static Gripping Force (KN [kgf])  (31[3161])  Dimension T3 (mm)  40  Dimension T1 (mm)  80  Dimension T2 (mm)  28  Maximum Operating Speed (min -1 [rpm])  3500  Mass (kg)  13.4  Suitable for  HBS07C (hard nail)  Dimension T9 (mm)  40  Type  Split claw  Handle Torque (Nm [kgfm])  (107.9[11.0]) 
    from S$469.90
    Min. 2 days
  13. Iron claws for Nippon Steel
    ARM SANGYO Iron claws for Nippon Steel
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$86.99
    Min. 3 days
  14. Kitagawa high claw (for scroll)
    IZS Kitagawa high claw (for scroll)
    Material  S45C  Dimension E (mm) 
    from S$149.90
    Min. 4 days
  15. 3 jaw scroll chuck Hard jaw type
    DI CHUN IRON WORK 3 jaw scroll chuck Hard jaw type
    from S$779.90
    Min. 4 days
  16. Howa's raw claws (hydraulic / pneumatic)
    IZS Howa's raw claws (hydraulic / pneumatic)
    Material  S45C 
    from S$49.99
    Min. 4 days
  17. HO22M/H27MA(HO37M)
    GiGA SELECTION HO22M/H27MA(HO37M)
    Material  S45C 
    from S$49.99
    Min. 4 days
  18. B-200 / B-200 small diameter
    GiGA SELECTION B-200 / B-200 small diameter
    Cell Spacing (mm)  (Serration) 1.5 × 60 °  Material  S45C 
    from S$45.99
    Min. 4 days
  19. SBS-B scroll raw nail
    GiGA SELECTION SBS-B scroll raw nail
    Material  S45C 
    from S$64.99
    Min. 4 days
  20. Round raw nails for Kitagawa, Toyokazu, Matsumoto
    THECUT Round raw nails for Kitagawa, Toyokazu, Matsumoto
    from S$459.90
    Min. 5 days
  21. High claw for scroll chuck
    TRUSCO High claw for scroll chuck
    Material  S45C 
    Rating:
    100%
    from S$119.90
    Min. 2 days
  22. Kitagawa Nail (Hydraulic / Pneumatic) HJA
    IZS Kitagawa Nail (Hydraulic / Pneumatic) HJA
    Cell Spacing (mm)  1.5  Dimension E (mm)  Material  S45C 
    from S$86.99
    Min. 4 days
  23. Kitagawa Nail (Hydraulic / Pneumatic) HN
    KATO Kitagawa Nail (Hydraulic / Pneumatic) HN
    Since it is necessary to process according to the shape of the material, we use S50C, which is easy to correct and cut. It is also used for general-purpose lathes, NC lathes, machining centers, drilling machines, milling cutters, etc.
    Shape  Material  S50C  Dimension E (mm) 
    Rating:
    60%
    from S$89.99
    Min. 5 days
  24. SBS scroll raw nail
    GiGA SELECTION SBS scroll raw nail
    Material  S45C  Hook Type  Yamatori  Dimension F (mm)  3.5  Dimension E (mm) 
    from S$69.99
    Min. 4 days
  25. Iron claw for Victor scroll chuck
    ARM SANGYO Iron claw for Victor scroll chuck
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$89.99
    Min. 3 days
  26. Kitagawa raw nail (for hydraulic and air chuck)
    THECUT Kitagawa raw nail (for hydraulic and air chuck)
    from S$48.99
    Min. 5 days
  27. HO wide claws
    GiGA SELECTION HO wide claws
    Material  S45C 
    from S$119.90
    Min. 4 days
  28. Steel claws (hydraulic / pneumatic)
    IZS Steel claws (hydraulic / pneumatic)
    Cell Spacing (mm)  1.5  Material  S45C 
    from S$58.99
    Min. 4 days
  29. Raw nail for Victor scroll
    Victor Raw nail for Victor scroll
    Material  S45C 
    from S$139.90
    Min. 3 days
  30. HJ hard nails
    GiGA SELECTION HJ hard nails
    Cell Spacing (mm)  (Serration) 1.5 × 60 °  Material  SNCM21  Hardness  HRB58~60 
    from S$569.90
    Min. 4 days
  31. R-HO / B-200 circular (iron)
    GiGA SELECTION R-HO / B-200 circular (iron)
    Material of thin materials, thin plates, and processed pipes: S45C can be grasped without deformation, which is effective as a measure against chattering.
    Material  S45C 
    from S$379.90
    Min. 4 days
  32. Iron raw nails for Kitagawa KPC
    ARM SANGYO Iron raw nails for Kitagawa KPC
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$129.90
    Min. 3 days
  33. Aluminum raw nail for Kitagawa scroll chuck
    ARM SANGYO Aluminum raw nail for Kitagawa scroll chuck
    Since it is softer than iron nails, it is hard to scratch the work. As it is soft, it can be easily scraped and workability is good. Since it is light, the grasping power does not easily decrease due to centrifugal force. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  Aluminum alloy / A2017P T351 
    from S$159.90
    Min. 4 days
  34. Small diameter raw nail
    TRUSCO Small diameter raw nail
    It uses S45C steel, which is easy to correct and has appropriate hardness. In addition, careful processing has been performed in consideration of factors such as a decrease in restoration accuracy (center runout) after reattachment and a cause of distortion in the attachment of the master jaw.
    Cell Spacing (mm)  1.5 
    from S$88.99
    Min. 2 days
  35. SBS small diameter
    GiGA SELECTION SBS small diameter
    Dimension F (mm)  Dimension K (mm)  Dimension E (mm)  Hook Type  Small diameter  Material  S45C 
    from S$77.99
    Min. 4 days
  36. Victor nail (for scroll)
    IZS Victor nail (for scroll)
    Material  S45C 
    from S$129.90
    Min. 5 days
  37. Soft Jaw for Scroll Chuck (Unhardened)
    Kitagawa Iron Works Soft Jaw for Scroll Chuck (Unhardened)
    Kitagawa Iron Works Scroll chuck soft jaw. * If you order by cash on delivery, it may be shipped the next day or later.
    Material  SCM420HL 
    from S$109.90
    Min. 13 days
  38. Howa Iron Raw Nail
    ARM SANGYO Howa Iron Raw Nail
    We guarantee high quality because we process 6 faces one by one and then process raw nails. For lathe chuck * The shipping unit is 1 set (3 pieces).
    Material  S-50C 
    from S$86.99
    Min. 3 days
  39. H01MA
    GiGA SELECTION H01MA
    Material  S45C 
    from S$129.90
    Min. 4 days
  40. Toyoka / Kitagawa / Matsumoto combined high claw (hydraulic / pneumatic)
    IZS Toyoka / Kitagawa / Matsumoto combined high claw (hydraulic / pneumatic)
    Material  S45C  Dimension E (mm) 
    from S$119.90
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 189

Set Ascending Direction