All Category

Other Files

View : Grid List
Filter

Items 1 - 40 of 85

Set Ascending Direction
  1. All-purpose file
    TAKAGI All-purpose file
    For roughing of iron and non-ferrous metals
    Rating:
    100%
    from S$8.29
    Min. 2 days
  2. File holder
    Tajima (TJM DESIGN) File holder
    Polishing materials (sandpaper, cloth file, glue file, etc.) can be set according to the application, such as finishing the interior base of walls and floors, and treating the base of sheet metal and painting, making polishing work easy and fast. Wicker is wrapped around the grip so that your han... Read More
    Sanding Surface (mm)  (Abrasive) 75 × 240  Mass (g)  278  Mass of Main Unit (g)  278  Trusco Part No.  813-4399 
    Rating:
    78%
    from S$24.99
    Min. 2 days
  3. Plastic for Filing (with GRIP)
    Tsubosan Plastic for Filing (with GRIP)
    It is a single item that does not easily clog and allows you to work smoothly. Comes with a grip that fits comfortably in your hand. The side (only one side) is also engraved with a blade. Please use for plastic or soft metal. * If it is clogged, remove it with a brush etc. before use.
    Blade Length (mm)  135  Overall Length (mm)  235  Suitable Material  Plastic, soft metal  Abrasive Grit Size  Single eye (medium eye) 
    Rating:
    93%
    from S$13.99
    Min. 2 days
  4. Paper file holder
    TRUSCO Paper file holder
    A polishing holder that fits 1/3 cut paper files. Since the paper is wrapped around it, a uniform finished surface can be easily obtained.
    Mass (g)  17  Dimensions, Thickness x Width W x Length L (mm)  25×70×93  Trusco Part No.  818-5114  Material  Polyethylene 
    Rating:
    80%
    from S$3.79
    Min. 2 days
  5. File for aluminum (with GRIP)
    Tsubosan File for aluminum (with GRIP)
    It is a single item that does not easily clog and allows you to work smoothly. Comes with a grip that fits comfortably in your hand. The side (only one side) is also engraved with a blade. Please use for aluminum or soft metal. * If it is clogged, remove it with a brush etc. before use.
    Blade Length (mm)  150  Blade Width (mm)  16  Overall Length (mm)  190  Thickness (mm)  Suitable Material  Aluminum, soft metal  Shape  Flat  Abrasive Grit Size  Single (coarse) 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  6. Bright 900 Varito
    Tsubosan Bright 900 Varito
    This is a "deburring-only" proposal that was unlikely until now. By adopting a VR cut with the nafly (file angle) set to an obtuse angle, you can enjoy an unprecedented deburring feeling. In addition, by reviewing the taper structure of the file cross section and making it a straight st... Read More
    Rating:
    80%
    from S$26.99
    Min. 2 days
  7. File to cut to the side
    Tsubosan File to cut to the side
    Unlike the conventional file that is pushed forward and sharpened, it is held like a cutter knife and used to slide sideways with respect to the surface to be cut. It is a skilled finish that the cutting edge does not bite like a knife. With a finished surface equivalent to # 200, it can be used ... Read More
    Blade Width (mm)  10  Overall Length (mm)  130  Blade Length (mm)  40 
    from S$24.99
    Min. 2 days
  8. Electrodeposited diamond file
    YANASE Electrodeposited diamond file
    This product is made by electrodepositing diamond on a small diameter stainless steel wire. It bends freely with electrodeposited diamond thread. Ideal for polishing hard-to-reach or narrow areas.
    Outer Diameter (Φmm)  0.6  RoHS directive (corresponding to 10 substances)  Length (mm)  300  Recycled paper use mark  Conformity  Act on Promoting Green Procurement  Conformity 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  9. Kisage
    FFC Kisage
    Shave the metal.
    RoHS directive (corresponding to 10 substances)  Material  File steel 
    from S$13.99
    Min. 2 days
  10. Plastic model file
    MINESHIMA Plastic model file
    It is a basic file for plastic models.
    Rating:
    100%
    from S$3.19
    Min. 2 days
  11. Polishing spatula
    FFC Polishing spatula
    By rubbing it against metal, it gives a gloss and tightens.
    RoHS directive (corresponding to 10 substances) 
    from S$16.99
    Min. 2 days
  12. Quickcut Varito
    Tsubosan Quickcut Varito
    This is a "deburring-only" proposal that was unlikely until now. By adopting a VR cut with the nafly (file angle) set to an obtuse angle, you can enjoy an unprecedented deburring feeling. In addition, by reviewing the taper structure of the file cross section and making it a straight st... Read More
    Rating:
    100%
    from S$12.99
    Min. 2 days
  13. File type 5 for aluminum
    Tsubosan File type 5 for aluminum
    It is a single item that does not easily clog and allows you to work smoothly. Comes with a grip that fits comfortably in your hand. The side (only one side) is also engraved with a blade. Please use for aluminum or soft metal. * If it is clogged, remove it with a brush etc. before use.
    Blade Width (mm)  11  Blade Length (mm)  110  Overall Length (mm)  215  Thickness (mm)  3.5  Suitable Material  Aluminum, soft metal  Shape  Flat  Abrasive Grit Size  Single (coarse) 
    from S$9.79
    Min. 2 days
  14. File for plastic
    Tsubosan File for plastic
    It is a single item that does not easily clog and allows you to work smoothly. Comes with a grip that fits comfortably in your hand. The blade is also engraved on one side (only one side). * If it is clogged, remove it with a brush etc. before use.
    Abrasive Grit Size  Single eye (medium eye)  Overall Length (mm)  215  Blade Width (mm)  11  Blade Length (mm)  110  Thickness (mm)  3.5  Suitable Material  Plastic, soft metal 
    from S$16.99
    Min. 2 days
  15. HOMARE Plastic File Medium
    Karasawa file HOMARE Plastic File Medium
    The ultimate made in Japan. File Honor (Homare) It has a more delicate sharpness than the Swiss Vallorbe. Special surface processing that does not clog, jointly developed with Niigata University. Since the eyes are single, the skin surface after scraping is clean and the surface can be beautifull... Read More
    Suitable Material  Plastic, wood, light metal, etc.  Material  SKS8  Abrasive Grit Size  Second 
    Rating:
    60%
    from S$29.99
    Min. 2 days
  16. File for leather / rubber half circle 200MM
    YAMAGUCHI File for leather / rubber half circle 200MM
    Mass (g)  160  Width (mm)  20  Overall Length (mm)  200  Thickness (mm)  8.5  Trusco Part No.  811-6943  Shape  Half curved  Suitable Material  Leather / Rubber  Abrasive Grit Size  Onishi / Ironwork 
    Rating:
    100%
    from S$23.99
    Min. 2 days
  17. Varito Standard
    Tsubosan Varito Standard
    This is a "deburring-only" proposal that was unlikely until now. By adopting a VR cut with the nafly (file angle) set to an obtuse angle, you can enjoy an unprecedented deburring feeling. In addition, by reviewing the taper structure of the file cross section and making it a straight st... Read More
    from S$10.99
    Min. 2 days
  18. Needle file
    MINESHIMA Needle file
    Tip Diameter (mm)  0.6  Type  For finishing 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  19. File storage band
    Tsubosan File storage band
    For the purpose of protecting the cutting edge of the file, we adopted a thick cotton fabric to consider the global environment and waterproofing (mercerizing). Can store 8 types of files and 2 types of wooden patterns.
    Rating:
    60%
    from S$32.99
    Min. 2 days
  20. Craft File Oil eyes 3
    MINESHIMA Craft File Oil eyes 3
    It is a file reset with reasonable price.
    Rating:
    60%
    from S$7.69
    Min. 2 days
  21. File for stainless steel half circle 2
    YAMAGUCHI File for stainless steel half circle 2
    Mass (g)  152  Length of File  200  Width (mm)  21  Thickness (mm)  Trusco Part No.  811-6931  Shape  Half curved  Abrasive Grit Size  Second  Suitable Material  Stainless steel 
    from S$32.99
    Min. 2 days
  22. Craft file 5
    MINESHIMA Craft file 5
    It is a file reset with reasonable price.
    from S$8.89
    Min. 2 days
  23. Moro Hand File
    Tsubosan Moro Hand File
    For flat finishing with a large surface width. Scratch removal and chamfering of cutting scratches. Flattening after sanding. * If it is clogged, remove it with a brush etc. before use.
    from S$19.99
    Min. 5 days
  24. Craft file
    MINESHIMA Craft file
    A reasonably priced oil file.
    from S$3.19
    Min. 7 days
  25. Craft file
    Tsubosan Craft file
    It has a sharp sharpening and is excellent in durability. An easy-to-use file with a wooden handle. Please use it for processing all kinds of metals including iron. * If it is clogged, remove it with a brush etc. before use.
    Blade Length (mm)  100  Overall Length (mm)  190  Suitable Material  General metals such as iron  Abrasive Grit Size  Second 
    from S$7.69
    Min. 4 days
  26. Craft file
    MINESHIMA Craft file
    A file with a reasonable price.
    from S$2.69
    Min. 7 days
  27. Craft File Nakame 5
    MINESHIMA Craft File Nakame 5
    It is a file reset with reasonable price.
    Rating:
    40%
    from S$8.89
    Min. 7 days
  28. File 20 for round stainless steel
    YAMAGUCHI File 20 for round stainless steel
    Length of File  200  Mass (g)  72  Outer Diameter (Φmm)  Trusco Part No.  811-6932  Shape  Round  Abrasive Grit Size  Second  Suitable Material  Stainless steel 
    from S$23.99
    Min. 2 days
  29. Craft File Middle eyes
    MINESHIMA Craft File Middle eyes
    It is a medium-sized file with a reasonable price.
    from S$2.69
    Min. 7 days
  30. Nail file-supple B-
    Hiroshima File Nail file-supple B-
    High-class nail file made by the only precision file maker in Japan by making full use of its technology-Supple- It can be used semi-permanently. A feeling of sharpening that even professionals are surprised at! It can be sharpened supplely and smoothly, and the toes become smooth. Please experie... Read More
    RoHS directive (corresponding to 10 substances)  Overall Length (mm)  128  Width (mm)  6~12  Thickness (mm) 
    from S$52.99
    Min. 2 days
  31. File 20 for stainless steel flat
    YAMAGUCHI File 20 for stainless steel flat
    Mass (g)  152  Length of File  200  Width (mm)  21  Thickness (mm)  Trusco Part No.  811-6930  Shape  Flat  Abrasive Grit Size  Second  Suitable Material  Stainless steel 
    from S$24.99
    Min. 4 days
  32. Flat gravel for plastic resin 2
    YAMAGUCHI Flat gravel for plastic resin 2
    Width (mm)  16  Overall Length (mm)  200  Thickness (mm)  Shape  Flat  Abrasive Grit Size  Gravel eyes  Suitable Material  Plastic resin 
    from S$18.99
    Min. 4 days
  33. Diamond reamer for beads
    SUN UP Diamond reamer for beads
    Diary reamer dedicated to bead processing A set of 4 smooth reamers (2) that clean the holes of the beads and widen the size to make it easier to pass through, and soft reamers (2) for deburring the entrance and exit of the bead holes.
    Overall Length (mm)  128  Mass (g)  33 
    from S$15.99
    Min. 2 days
  34. 920 handle (for titanium super hand)
    Tsubosan 920 handle (for titanium super hand)
    Trusco Part No.  852-8585 
    from S$6.39
    Min. 5 days
  35. Multi file
    Vallorbe Multi file
    As the name implies, a file with a wide range of applications. It is effective for cutting workpieces (aluminum, brass, resin, hard wood, etc.) that are easily clogged with ordinary files. Since the front and back have different roughness, it is possible to use rough cutting and finish cutting pr... Read More
    RoHS directive (corresponding to 10 substances)  Suitable Material  Aluminum, brass, resin, hard wood, etc.  Shape of File  Flat 
    Rating:
    60%
    from S$85.99
    Min. 5 days
  36. Hobby Yass Reset
    trad Hobby Yass Reset
    With a vinyl case that is convenient for storage and storage. Large hard resin grip that is easy to grip and does not get tired. For plastic models, radio-controlled models, and metalwork. Since the sharpened skin is beautiful, it is also ideal for sharpening and finishing blades.
    RoHS directive (corresponding to 10 substances) 
    from S$10.99
    Min. 5 days
  37. Plastic Model Komaru File
    MINESHIMA Plastic Model Komaru File
    It is a basic file for plastic models.
    Shape  Komaru 
    from S$3.59
    Min. 7 days
  38. File for Co-Handled Plastic
    H&H File for Co-Handled Plastic
    For processing PVC, plastics, resin materials, etc.
    Dimension (mm)  150 
    from S$10.99
    Min. 5 days
  39. Sand belt
    Milescraft Sand belt
    For polishing plastic, metal, wood, painted surfaces, etc.
    Belt Length (mm)  303  Belt Width (mm)  40 
    from S$11.99
    Min. 8 days
  40. Flat single eye for plastic resin
    YAMAGUCHI Flat single eye for plastic resin
    Mass (g)  170  Overall Length (mm)  200  Width (mm)  21  Thickness (mm)  Trusco Part No.  811-6945  Shape  Flat  Suitable Material  Plastic resin  Abrasive Grit Size  Second 
    from S$18.99
    Min. 4 days
View : Grid List
Filter

Items 1 - 40 of 85

Set Ascending Direction