All Category

Pneumatic Tool Accessories

Pneumatic tool accessories are parts related to “pneumatic tools” that are driven using the force of compressed air returning. This category includes needles for air chisel used for peeling operations, air sander replacement pads and polishing paper used for polishing operations, and sponge buffs for air polishers. Also included in the pneumatic tool accessories are connecting hoses such as impact wrenches and grinders that protect pneumatic tool connections that generate vibration from vibration.
View : Grid List
Filter

Items 1 - 40 of 1441

Set Ascending Direction
  1. FCH-20 Holder Spring
    FUJI INDUSTRIAL TECHNIQUE FCH-20 Holder Spring
    Rating:
    100%
    from S$3.59
    Min. 2 days
  2. Side handle for U-83P
    U-TOOLS (SAITAMA SEIKI) Side handle for U-83P
    Suitable for  U-83P 
    from S$16.99
    Min. 8 days
  3. Drill chuck for FRD-6PH-3 (8)
    FUJI INDUSTRIAL TECHNIQUE Drill chuck for FRD-6PH-3 (8)
    Air Consumption (m3/min)  0.6  Chucking Size (mm)  Overall Length (mm)  45.2  Suitable Model  FRD-6PH-3-8  Trusco Part No.  798-4235 
    from S$129.90
    Min. 7 days
  4. Nile timing unit TU01
    MUROMOTO TEKKO Nile timing unit TU01
    Trusco Part No.  852-3535 
    from S$299.90
    Min. 4 days
  5. Needle General Purpose
    MonotaRO Needle General Purpose
    Due to the use of special steel, it is tough and has a long life. A highly versatile needle that can be used by various manufacturers. Needle for pneumatic and electric chisel. * Needle for pneumatic / electric chisel. Never use it for any other purpose.
    Length (mm)  180 
    Rating:
    91%
    from S$76.99
    Min. 2 days
  6. Flat eraser pad
    MASTER AIR Flat eraser pad
    A flat eraser pad used for low-speed drills.
    RoHS directive (corresponding to 10 substances)  Thickness (mm)  15  Allowable Rotation Speed (min -1 [rpm])  4000  Screw Dimensions  5/16-24  Diameter (Φmm)  88  Suitable Model  MPT38660  Specification  With 6Φ adapter 
    Rating:
    85%
    from S$19.99
    Min. 2 days
  7. Parts Air impact wrench KW-1600proX
    KUKEN Parts Air impact wrench KW-1600proX
    Rating:
    100%
    from S$0.26
    Min. 2 days
  8. Air Hammer Lytopic Hammer (Air type)
    TOKU PNEUMATIC Air Hammer Lytopic Hammer (Air type)
    For concrete chipping work in civil engineering, construction, and building structures. For deburring work.
    Rating:
    100%
    from S$14.99
    Min. 2 days
  9. FCH-20 type chisel
    FUJI INDUSTRIAL TECHNIQUE FCH-20 type chisel
    Cutting Edge Shape  Flat type 
    Rating:
    100%
    from S$22.99
    Min. 2 days
  10. Parts for Air Orbital Sander
    MonotaRO Parts for Air Orbital Sander
    * Do not use for anything other than its intended purpose.
    Pad Dimensions (mm)  73×98  Suitable Model  M12 Monotaro Air Orbital Thunder 
    Rating:
    68%
    from S$29.99
    Min. 2 days
  11. coil spring
    AIRREX (Anest Iwata) coil spring
    Suitable for  TL9534 TL9003 TLX9803 
    Rating:
    87%
    from S$27.99
    Min. 2 days
  12. Sandblast Exclusive Sand
    ESCO Sandblast Exclusive Sand
    Abrasive Grain Size  60  Material  Aluminum system  Esco Part No.  EA127B-15  Suitable for  For EA127B, BB, BK 
    Rating:
    93%
    from S$47.99
    Min. 2 days
  13. Parts Air Riveter R1A1
    LOBSTER (LOBTEX) Parts Air Riveter R1A1
    from S$2.89
    Min. 2 days
  14. Gear type eraser pad
    MASTER AIR Gear type eraser pad
    Efficiently scrapes stickers and lines with many corners !! It can be used with low-speed drills, etc.
    RoHS directive (corresponding to 10 substances)  Diameter (Φmm)  100  Thickness (mm)  27  Allowable Rotation Speed (min -1 [rpm])  3500  Screw Dimensions  5/16-24  Suitable Model  MPT38660  Specification  With 6Φ adapter 
    Rating:
    76%
    from S$45.99
    Min. 2 days
  15. Concrete breaker (pneumatic)
    TOKU PNEUMATIC Concrete breaker (pneumatic)
    Rating:
    100%
    from S$29.99
    Min. 2 days
  16. Part medium size impact wrench KW-14HP
    KUKEN Part medium size impact wrench KW-14HP
    Rating:
    100%
    from S$0.07
    Min. 2 days
  17. Parts Flux chipper FCH-20
    FUJI INDUSTRIAL TECHNIQUE Parts Flux chipper FCH-20
    Number of units used 
    from S$1.29
    Min. 2 days
  18. Parts Air impact wrench SI-1600B ULTRA
    SHINANO Parts Air impact wrench SI-1600B ULTRA
    Rating:
    87%
    from S$0.31
    Min. 2 days
  19. Parts Belt sander SI-2700
    SHINANO Parts Belt sander SI-2700
    Rating:
    100%
    from S$0.47
    Min. 2 days
  20. Cup GrindStone (For 093/123)
    UHT (Ushio) Cup GrindStone (For 093/123)
    For grinding
    Wheel Diameter (Φmm)  30  Mounting Dimensions  M7×P0.75 
    Rating:
    90%
    from S$74.99
    Min. 2 days
  21. Socket set
    AIRREX (Anest Iwata) Socket set
    "AIRREX" is Anest Iwata's DIY brand. It is a set of sockets that are ideal for impact wrenches. Tightening and loosening bolts and nuts.
    Rating:
    85%
    from S$32.99
    Min. 2 days
  22. Sponge contact for roller minico
    OFFICE MINE Sponge contact for roller minico
    For all polishing
    Rating:
    100%
    from S$119.90
    Min. 2 days
  23. Chischisel for chipper
    Nippon Pneumatic Mfg Chischisel for chipper
    from S$27.99
    Min. 2 days
  24. Flat chisel for chippers
    Nippon Pneumatic Mfg Flat chisel for chippers
    from S$27.99
    Min. 2 days
  25. Bimetal air saw blade
    TRUSCO Bimetal air saw blade
    Uses a bimetal saw blade that is hard to break, is strong against impact, and has good sharpness. It can be cut even in a small place. For cutting thin iron plates, thin stainless steel plates, aluminum, plastics, bumper materials, FRP, etc. For finishing woodworking and resin products. For debur... Read More
    Mass (g)  48.2  Material  Bimetal high speed  2018 Trusco page  5 0866 
    from S$48.99
    Min. 2 days
  26. Shrimp Riveter M Nosepiece
    LOBSTER (LOBTEX) Shrimp Riveter M Nosepiece
    Tip parts for LOBTEX S-type / M-type air riveters and hand riveters * Install a size that matches the diameter of the rivet flange you are using. If rivets of different sizes are used, rivets cannot be performed normally.
    from S$9.79
    Min. 2 days
  27. Flat chisel 20mm width for air opener M270F
    MonotaRO Flat chisel 20mm width for air opener M270F
    Tip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.
    Dimension (mm)  12.7X175  Mass (g)  192  Suitable for  For air archer M270F  Material  SCM440  Shank Shape  Square 
    from S$28.99
    Min. 2 days
  28. Air chipper 50 mm wide Flat chisel for M270F
    MonotaRO Air chipper 50 mm wide Flat chisel for M270F
    Tip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.
    Dimension (mm)  12.7X175  Mass (g)  265  Suitable for  For air archer M270F  Material  SCM440  Shank Shape  Square 
    from S$35.99
    Min. 2 days
  29. Parts Lytopic Hammer AA-3B
    TOKU PNEUMATIC Parts Lytopic Hammer AA-3B
    Number of units used 
    Rating:
    100%
    from S$1.99
    Min. 2 days
  30. Parts Air impact wrench KW-140P
    KUKEN Parts Air impact wrench KW-140P
    Rating:
    100%
    from S$0.26
    Min. 2 days
  31. Flat chisel
    AIRREX (Anest Iwata) Flat chisel
    Specification  Hex axis only  Suitable for  TLX9803、TL9834 
    Rating:
    100%
    from S$24.99
    Min. 2 days
  32. Nose cap for Air Finish Neira
    MonotaRO Nose cap for Air Finish Neira
    Dedicated replacement part for Monotaro Air Finish Neira. * Do not use for any purpose other than its intended purpose. * Due to model changes, the color will change from red to white.
    Suitable for  MF35、MF57 
    Rating:
    20%
    from S$3.59
    Min. 2 days
  33. Parts Medium size impact wrench KW-2500pro
    KUKEN Parts Medium size impact wrench KW-2500pro
    Rating:
    100%
    from S$0.26
    Min. 2 days
  34. # 120 / 1kgx2 sandblast sand
    ESCO # 120 / 1kgx2 sandblast sand
    Esco Part No.  EA127B-17  Material  Aluminum system  Suitable for  For EA127B, BB, BK 
    from S$47.99
    Min. 2 days
  35. Trametme changer (tractor claw replacement air tool)
    Air Wave (Wa Corp.) Trametme changer (tractor claw replacement air tool)
    Only the inner tension bar under the grip rotates, so even if the inner tension bar rotates at high speed, you can rest assured that you will not get burned or injured. Tractor claws and halo claws can be replaced using the air impact wrench used to replace tires. Even rusted nuts can be attached... Read More
    Withstand load N ・ m (kgf ・ m)  (Horizontal) 592  Angle of Flexible Head (°)  40  Material (Socket)  Cr-Mo (chromium molybdenum steel) 
    Rating:
    92%
    from S$99.90
    Min. 2 days
  36. Air Hose
    UHT (Ushio) Air Hose
    Ushio Hand Tools / Micro Spindle Parts
    Length (m)  1.5  Specification  With band  Mass (g)  36  Trusco Part No.  143-3504 
    Rating:
    100%
    from S$16.99
    Min. 2 days
  37. Flat chisel
    AIRREX (Anest Iwata) Flat chisel
    Suitable Model  TL9003/TL9534 
    from S$25.99
    Min. 2 days
  38. Paper dust bag
    Compact Tool Paper dust bag
    A disposable dust suction bag for dust suction sanders.
    Trusco Part No.  366-3906  Mass (g)  300 
    Rating:
    100%
    from S$32.99
    Min. 2 days
  39. Duct hose
    Compact Tool Duct hose
    The low center of gravity design provides a good sense of stability and excellent usability. Duct hose for dust suction sander Φ19. Putty polishing, woodworking polishing, FRP polishing.
    Dimension (mm)  Hose Length (mm)  1250  Mass (g)  130  Trusco Part No.  366-3914 
    Rating:
    60%
    from S$38.99
    Min. 2 days
  40. New Soft Wrap (for 093/123)
    UHT (Ushio) New Soft Wrap (for 093/123)
    For polishing
    Specification  1 rubber pad  Diameter (Φmm)  30  Mass (g)  45  Mounting Dimensions  M7×P0.75 
    Rating:
    100%
    from S$48.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 1441

Set Ascending Direction