The reviews are automatic translation.
Showing 1 - 20 of 20 Reviews which have 5 star
[ See all 34 customer reviews ]
On 2018-05-23 11:55:30
For stones for stones, the sharpness was good, even with a manual tap it was not necessary to switch back.
Work efficiency UP
On 2018-03-23 21:04:35
We are using it for making threads into stainless steel (SUS 304) through hole.
Previously, I used a hand tap, but this point tap raised working efficiency because cutting waste is discharged in the direction of tool advancement.
On 2017-03-06 17:20:47
Used for stainless steel thread cutting. I do not have any complaints.
Stainless steel tapping process
On 2016-07-14 17:43:03
Even if it is somewhat expensive, I chose a product of trust. It is useless if you break up on the way.
On 2015-12-27 12:50:09
Purchased to make threads on a thick iron plate, originally for stainless steel, I cut the Don Dong mountain without breaking.
Used for landslides of nuts
On 2015-04-16 18:42:51
You can dress well.
Tap stand of sus
On 2015-03-19 18:01:18
A nice place of OSG's tap is best for penetrating type screw stands as chips fall down.
Tap processing in machining center
On 2014-09-17 20:53:28
It got well, I was satisfied with durability so so.
Part installation on the vehicle
On 2014-08-15 13:23:30
The sharpness is good, the rest is durability
Drilling of steel material
On 2014-06-19 13:06:37
It is preeminent sharpness! It is! It is!
On 2014-03-06 22:17:28
It was able to be cut well without problems.
Re-trimming the collet chuck screw
On 2013-05-16 20:29:09
It was saved because the size was special and it was hard to find. Of course it was pretty sharp and easy to use.
On 2013-03-04 19:17:19
You can cut well. Only durability is a problem It is satisfying if you can use a reasonable amount
SUS 304 9 mm thick plate
On 2012-10-08 15:50:12
SUS304 We processed 12 holes in M 10 and 48 holes in M 8 with a combination of stainless steel and hand tap on 9 mm thick plate, but we are satisfied
Tap processing of welding member
On 2012-09-25 10:23:36
One word of durability and break, tap processing is planned to be changed to OSG products.
Tap work of SUS products
On 2011-08-08 12:24:09
Kireaji well and durability was better than other companies.
It is used for tapping of SUS303, 304, 316.
On 2011-04-27 14:55:15
It is a tap that you can purchase well because it can be used stably.
Used to stand female thread on pipe
On 2011-01-13 13:32:15
I am very satisfied.
Used to stand female thread on thin pipe
On 2010-12-13 22:19:24
It cheaply cuts well
It is used for tapping of sus303 and sus304.
On 2010-11-19 07:54:07
I am very satisfied.