The reviews are automatic translation.
For assembly of electrical parts
On 2018-11-20 16:14:49
The feeling that there is a feeling of repulsion is exactly good for pinching parts, so our company always repeats this and distributes it to our employees.
Soldering of SMD parts, etc., fine work
On 2018-06-03 04:09:26
Baoshan's powerful series owns all three works and uses them properly.
Originally, when I grabbed a suitable force, it took the P - 892 with a tip width of 1.2 mm as standard, but the SMD parts also became small, the width of the 1.2 mm width that I chose was also "too much" under the magnifying glass Since it came to be P - 894, P - 891 introduced.
Here is "neighborhood", is not it? If it is better to be sharp, it will be P-894, and if you feel that the 0.6 mm width of P-891 is slightly fat, you will sharpen yourself.
It's easy to use, but it's magnetic ...
On 2018-04-04 09:32:45
Mechanically it is extremely easy to use, but taking the magnet is the biggest difficulty, as stress will accumulate as you pick up chip parts while using it.
I always think that it would be good if similar materials could be made of a nonmagnetic material such as SUS 304.
On 2017-07-10 14:36:34
The size was good, but this time work was not heavy.
Soldering work, others
On 2016-10-26 11:11:56
The main body has moderate rigidity, scissors work is supple and soft, supple parts are also grasped.
On 2016-08-08 03:14:33
I thought that cheap tweezers, home center cheap enough, but thought that it was so different! Because there is a waist, it is difficult to warp and the two edges fit each other so you can grasp firmly! If I do not buy it I feel that it is a loss.
Removal of the end of the seal
On 2015-12-09 14:54:54
As the tip is very solid, it is also suitable for taking off adhesive material with a sticky seal. Finally, tweezers we could meet.
Assembly light work
On 2014-06-12 13:48:39
If it is a cheap tweezers, the tip will bend soon and it will become difficult to grasp, whereas here it is a solid tip and you can grasp even a small part firmly. I can not use other tweezers anymore.
Part assembly work
On 2014-05-28 13:23:45
Strong and very easy to use
Household chores general
On 2014-01-20 20:39:18
Ideal for reliable work with high rigidity
On 2013-11-27 14:23:34
Do not talk about other tweezers without using this tweezers. Easy to use by processing (bending or scraping) the tip according to the application, cost performance is still the highest despite having been over 10 years since the launch.
Working with thin threads
On 2013-02-12 22:28:16
Finally I came across. It's small in size and good condition for grip. This is the first firm tweezers. It is a lifetime thing.