The reviews are automatic translation.
On 2018-06-20 15:37:42
It was inexpensive, we could use it normally without being able to do it.
Used for fixing during measurement
On 2018-06-12 14:58:54
It's cheap anyhow. In other words, I would like you to polish only the top surface. If you are measuring precisely at the time of purchase, you can not use it unless you measure it precisely and polish it once.
I am using it for positioning
On 2018-06-12 14:46:54
The ON OFF lever became a little harder after a while. I am worried that I will not finish this last.
Balance weight of the astronomical telescope
On 2018-04-04 15:08:38
Purchased in addition to two small magnet holders. The magnetic force of the small magnet holder was sufficient, but it is weak here. Hanging may fall outdoors.
Used for fixing the guide during signboard assembly
On 2018-02-28 21:03:55
Although it is used for fixing the signboard assembly guide, it has been easy to move and fine adjust, and it is useful even in the field.
When fixing non-hand-held material to machine
On 2018-01-17 14:55:18
I am saved because I was able to fully support the work for the price. It would be great if you could order size
Piping assembly work
On 2018-01-12 18:24:27
It is cheap but it was very helpful as it can be used as it is.
Fixation of steel
On 2017-12-14 19:48:55
We purchased 4 pieces for welding material fixing, but none of them are perpendicular
Fixation of jig
On 2017-11-17 15:35:23
Although it is made in China, COSPA is good. I am using it to fix the jig of the drill board but it is comfortable to fix securely.
Just in the box is written MADE IN P.R.C. Why is not it described as MADE IN China? It will not change the quality either.
For size setting in woodworking machine elevator
On 2017-10-22 23:43:30
I am satisfied with sufficient holding power, and it is desirable to make it smaller in my application.
Fastening the vice with a drilling machine
On 2017-10-12 14:59:36
Compared to Shinwa's magnet stand, the On-Off handle was hard. But it is cheap so OK.
Used for work lamp stand
On 2017-10-02 08:59:08
I think this price is cheap as normal, the magnetic force is not weak
On 2017-09-16 07:53:59
Magnetic force is sufficient. I would like to use it quickly, please tell me the pillar for this magnet base.
On 2017-09-05 17:06:33
Although the things are good for the price, I feel that the magnetism is a little weak.
I think that COSPA is good.
On 2017-08-19 01:15:22
It is very useful. I did not make five stars because I do not know the durability yet.
Used in a precision crossing machine
On 2017-08-04 23:33:36
It is convenient for cheap. There is no difference when ON. It is quite powerful.
During reinforcing bar bending, butting
On 2017-07-12 19:21:55
Because the magnetic force is strong, working dimensions can be taken firmly when bending the reinforcing bars.
When cutting aluminum structural materials
On 2017-06-25 19:23:24
When cutting aluminum material, it is used as an aid to reduce the size of sizing and clamping.
The price is also cheap, the magnetic force is powerful and it is convenient to use conveniently.
Fastening of steel during welding
On 2017-06-17 07:57:52
There is a switch ON · OFF and it is easy to use. As it is, right angle also comes out so adjustment is easy.
For sensor positioning
On 2017-03-29 15:12:14
I am using it when installing a sensor to remove it. Although I am using several pieces, I am useful because it can be removed completely by on / off.