The reviews are automatic translation.
On 2014-06-17 10:39:34
I think that it is better to think better in terms of price. Some people who have written durability but also buy again when the price is price so it will not run out. We strongly hope for resale.
Chamfering of aluminum material
On 2014-04-30 13:21:12
I tried to chamfer the corners of the material with a milling cutter, but the cutting surface is irregular and it does not become a product. It is for chamfering holes and dish processing.
Tap lower hole chamfering, deburring (SS400 and S25C)
On 2014-02-01 12:52:14
Used after drilling SS400 or S25C. Because it was inexpensive at a special price, it is satisfactory in terms of cost. Ideal for mild steel.
On 2013-09-22 21:07:29
I purchased iron holes for chamfering. It was cheap so I did not expect much, but I was thinking about purchasing next time as the surface was beautifully taken. I do not know because the durability is still around 100.
Material Dracon grooves, hole chamfering
On 2013-05-05 07:40:28
Usually we are processing aluminum material, but this time we processed duracon material. I am slightly satisfied about Bali after processing. I was concerned about the roughness of the cutting edge of the counter sink a little. I would like to pay attention when processing aluminum materials in the future.
Chamfer after drilling
On 2012-11-15 13:06:34
Good cost performance. Sharp enough to be satisfied. I am concerned about sustainability.
Used for chamfering after drilling
On 2012-08-29 17:25:18
The sharpness was reduced without using 100 spots and the deburring was supposed to be a burr tool.
I use it in various situations.
On 2012-07-09 13:47:49
I am very satisfied that I can purchase it at disposal price.
Bonde 1.6 Dishes for steel plates
On 2011-12-21 02:12:16
The use frequency is not so high, but the sharpness has fallen quickly soon. Since other brand products have been in the same usage for many years, I regret that I should have made it to a maker item. There are good ones with monotail brands, but do not purchase this counter sink again.
Deburring of hole machining
On 2011-08-26 12:21:29
It was usable in general. For the moment there is no problem.
Chamfer mainly aluminum alloy, dish processing.
On 2011-08-10 13:08:57
I think that use frequency is not so high, but it was felt earlier that the sharpness of the sharpness which was originally not so good was felt. Although the roughness of the cut surface is also slight, it is worrisome. Although I can not imagine such a thing as thinking about the price, considering continued use does not fall into the next option.
Processing and chamfering of parts
On 2011-06-13 13:03:12
It's fine, sharpness is good and the price is also cheap
Machining of steel materials
On 2011-04-11 19:04:15
Although it is a monotaro brand, it is quite satisfying with the sharpness.
Deburring after drilling of SUS 304 material
On 2011-04-02 20:40:42
I did not use all the cutting tools (with shanks) bought at your store. This counter sink is unbearable, and it holds to any hole diameter.
On 2011-02-23 17:17:07
You can cut well. Almost chattering did not come out with cutting oil. I will buy it again as the price is price because it will not run out.
On 2011-02-23 11:31:42
Can be used properly. Heavy usage is also enduring fairly so.
Chamfering with drilling machine after drilling
On 2010-11-12 22:00:32
I did not expect much price honestly to price alone, but it cuts beyond what I thought. However, durability is superior to those of maker items, so it is four stars. I think cost performance is high.
For sinking and chamfering of dish screws
On 2010-09-21 22:56:01
Although it is cheap, it can be used quite well