The reviews are automatic translation.
Power gate remote control
On 2018-09-03 15:56:10
I want some more detailed information. I would like to have the description such as actual size and conformity in the image. It is still floating in the air because the repair is still not completed and return is also troublesome due to size difference.
For camcorder power supply
On 2018-07-27 15:17:25
I am using it for the camcorder's 100 V power supply, since it can be used for more than 6 years for my home, I made it the same one. It was better than camping car supplies store because it is cheap.
I intended to use for the joint of the cable, but did not use it
On 2018-05-29 14:35:22
I want you to try hard with a quick temp. Bush is difficult to see
Winch power supply connector
On 2017-09-19 18:38:58
I hope the water will not come in from the cable to the plug side. I am worried because the width of rubber bush (official name unknown) is short so that water does not enter, but I am expecting that "worry was in vain".
Used for private cars
On 2017-05-31 18:24:36
I used it for the external power connection cable of the camper. Although there is no instruction, construction is soon to understand construction.
To the power supply of the camper
On 2017-04-17 17:16:56
The connector attached to the power supply of the camper with one touch is distorted when used for many years because the bottom is a plus. The metal is better.
On 2016-10-14 20:50:34
Because it is not sold at a nearby store, it is very helpful.
For wagon car external power inlet
On 2016-08-30 02:33:08
It is also possible to solder and finish the code well, because it is one touch, so if you find a variety of things you sell it with a monotaro and purchase immediately. It was not quite possible to sell it because it was hard to sell.
Parts exchange of industrial equipment
On 2016-07-22 22:02:57
I am satisfied as a waterproof use. It would have been better if possible if the thickness of the pin was a bit bigger. I'd like to find out more suitable connectors in the future. Thank you very much.
Repair of navigational instrument for small ships (renewal of connection point of cable)
On 2015-10-22 09:01:46
The cable of the ship's navigational instrument became partially damaged and repair was done because it required a waterproof type connector (7 pin) (renewal connection point of cable). Because of Made in Japan, reliability and workability The use impression is satisfactory.
Power supply connector Replace due to breakage
On 2015-09-16 18:50:41
Parts fee + consumption tax + shipping cost is expensive. Correspondence until goods arrival is quick and good. I did not mention the address of the receipt.
It is mounted on equipment to be used outdoors.
On 2014-01-08 10:13:22
It is convenient to attach and detach with one touch, but there is a problem in durability. Is the spring to be locked plastic? I think that this depends on the frequency of use, but it will crack. It is one to two years with desorption 2 to 3 times a week.
As a terminal for input to the external power supply terminal of the minivan.
On 2013-03-04 20:15:44
I bought it as an input terminal connected to the external power supply terminal of the car. I think that it is a firm product even if it is cheap. I do not know the durability because it is made of resin, but I think that it can be firmly jointed with the terminal on the car side and it is light as well. Moreover, it was easy to solder the cable though it wrote wrongly in the review of the cap, and the workability was also good. It is reasonable that it is reasonable that even if it gets broken it can be replaced at once.
Repair of Kato Works Rafter
On 2011-12-31 09:23:44
I got cheaper than manufacturer genuine products and I am very satisfied. Just be careful as solder can not be used for repair. PE - 8 and PE - 10 of the part number are the thickness of the connecting line.