The reviews are automatic translation.
Used as a replacement bearing for a ruther
On 2018-10-22 17:31:41
It was used as a repair for Ruther. It is actually a specially designed bearing, but it was used because it has the same inside diameter / outside diameter. Although I do not measure, I think that it is the accuracy of the same diameter from the feeling at the time of insertion.
Bearing of rotating part of motor
On 2018-10-10 14:40:52
There is no abnormal noise and we can use it without problems. Because cost performance is good, I would like to buy from now on.
Floor hinge repair
On 2018-09-10 14:46:32
Because the bearings of the discontinued floor hinge were disaggered, we measured the size and replaced it with the oil seal. Thanks to that, the play of the door has run out.
Cell motor bearings
On 2017-06-07 13:57:03
It is inexpensive, we are dealing with alternatives and we are very satisfied. It seems there is no need to purchase genuine products.
Maintenance of motorcycle
On 2017-03-02 15:12:00
I do not know long-term durability, but I use it without problems. I am using it because cost is the best. I believe in Osaka soul and use it.
Exchange of bearings in the driven pulley of the scooter
On 2017-02-21 22:10:43
I removed the genuinely old parts and replaced it with this one. There is already no problem although it will already be over a year.
We used it for bearing of truck of truck.
On 2017-01-06 20:06:53
It is a cheap and easy-to-use product. I am very satisfied with the large number of sizes.
Repair parts for electric tools
On 2016-11-24 23:07:00
In the power tool, bearings are heavily exhausted, and bearings are replaced every maintenance. Because price is also cheap, you can exchanging with brand new without misunderstanding. There is no problem.
On 2016-11-10 19:23:54
It is stable all the time without variation. You can use it with confidence.
Maintenance parts for original mind CNC milling machine
On 2016-02-09 07:04:52
I purchased it as a spare for the replacement of the bearings used in the spindle unit. Although manufacturers are different, standards are the same, so they should be used without problems. (There is no problem if the tolerance accuracy is equivalent to a Japanese-made bearing maker.If the accuracy of Osaka soul is bad, it becomes a garbage.) It is a recommended item for those who use CNC milling machine frequently. The higher the rotation speed, the more the bearing balls will be worn out, so that the rotation shaft may be blurred, making it impossible to perform beautiful machining, opening a hole larger than the specified size, or causing distorted holes to open. If you think that machining accuracy has deteriorated, it is better to replace it earlier. We recommend that you use a bearing pooler when removing the bearing with bearing exchange. (I made a special puller at a low price, but since it can only use the original mind CNC milling machine, it may be better to sell it on the market.)
On 2015-11-04 06:39:49
I bought 6904ZZ, but I was engraved with 61904 on the main body. I got an explanation "I gave the manufacturer's own description" inquired, but I do not know the next purchase.
Machine assembly and repair parts.
On 2015-04-23 21:26:50
Until now, I was using a domestic bearing, but I tried to substitute it. Are you from China? Is it Korean again? I do not understand well, but the basic size is fine. Regarding specs, I do not know well because there is no inspection device, but I do not feel bad, and I can use it without problems. I'm sorry when the BOJ is doing my best with inflation goals, but the price is 1/3. I do not recommend it, but there is no problem.
On 2015-02-06 14:24:19
Although durability is now to come, the feeling of use is no problem, it is attractive in terms of price. However, depending on the operating temperature and environment, you may consider using other companies' products.
Used for replacement parts of automobile parts
On 2014-08-11 11:39:21
I think that it will be understood by using 5 years. Now it is now possible to use air conditioners.
My hobby bike
On 2014-06-10 19:24:20
It's cheap anyhow. Quality also has no problem.
Repairing children's toys
On 2014-05-14 09:40:13
Operating condition is also good
For repairing rotary machinery
On 2011-12-02 20:33:28
Because the price is relatively inexpensive, there are some uncertainties, but for now I can use it normally. Although durability is a problem, it is not used frequently, so we anticipate that this is enough.
I used it as a bearing of piston arm of Makita compressor.
On 2011-11-17 13:33:10
This time I bought a person with a cheap price, but I was able to use it well, regardless of the price.