Buy more than* S$200* and get FREE SHIPPING

Roll Tap

Sort by:
Showing 1 - 86 of 86 Results
Show: 30 60 90
VIEW: Grid View List View
New roll tap (TiN coating) (TIN-NRT)
OSG
4.50(2)
28.99 - 249.90 SGD
Surface Processing: Tin Coating
Category Roll Tap
High Roll Tap, for Steel, HRT
OSG
4.00(4)
12.99 - 28.99 SGD
Chamfer: 4P
Category Roll Tap
Titan Coating Roll Tap, R+V
YAMAWA MFG
4.00(1)
25.99 - 27.99 SGD
Category Roll Tap
VP new roll tap (for blind holes)
OSG
5.00(1)
32.99 - 119.90 SGD
Chamfer Lcf: 2P
Category Roll Tap
Roll Tap
YAMAWA MFG
13.99 - 22.99 SGD
Tap Grade: Class G, Surface Processing: Oxidation treatment , Processing Screw: Metric screw thread, 2014 TRUSCO Published Page: 1-0304, Purpose: Through hole processing. Work material: iron, carbon steel., Caution: Pilot hole process affects screw precision extremely. Pay attention during pilot hole work.
Category Roll Tap
 High roll tap ( for steel ) (HRT)
OSG
12.99 - 28.99 SGD
Chamfer: 2.5P
Category Roll Tap
 New roll tap (For steel)(NRT)
OSG
14.99 - 149.90 SGD
Category Roll Tap
VP new roll tap (for holes)
OSG
5.00(1)
32.99 - 119.90 SGD
Chamfer Lcf: 4P
Category Roll Tap
New roll tap (for nonferrous alloys) (B-NRT)
OSG
14.99 - 149.90 SGD
Chamfer Lcf: 4P, Purpose: For through holes
Category Roll Tap
 New roll tap (For steel)(NRT)
OSG
3.50(2)
14.99 - 149.90 SGD
Chamfer: 2P
Category Roll Tap
For Steel Rolltop, N+Rz
YAMAWA MFG
5.00(2)
12.99 - 13.99 SGD
Surface Processing: Oxidation treatment
Category Roll Tap
For T tough let stainless steel
TANOI MFG (TDT)
2.67(3)
27.99 - 48.99 SGD
Surface Processing: C coating
Category Roll Tap
General purpose roll tap (M) R - Y
YAMAWA MFG
9.39 - 16.99 SGD
Screw Type: M, Chamfer: 3P
Category Roll Tap
Roll tap (M)
YAMAWA MFG
13.99 - 48.99 SGD
Screw Type: M, Caution: * In case of order with cash on delivery, it may be shipped after the next day., * In case of order with cash on delivery, it may be shipped after the next day.
Category Roll Tap
High performance roll tap
YAMAWA MFG
2.00(1)
27.99 - 259.90 SGD
Screw Type: M
Category Roll Tap
Steel roll tap (U)
YAMAWA MFG
38.99 SGD
Nominal Dimension: UNF 3/8-24, Screw Diameter: UNF 3/8-24, Screw Type: UNF, Number of Threads per inch: 24, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Roll tap for dry machining (M)
YAMAWA MFG
4.00(1)
27.99 - 49.99 SGD
Screw Type: M
Category Roll Tap
Long non-ferrous roll tap (M)
YAMAWA MFG
5.00(1)
27.99 - 37.99 SGD
Screw Type: M, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., ※ In the case of COD orders there might be shipped after the next day.
Category Roll Tap
Roll tap (M)
YAMAWA MFG
12.99 - 38.99 SGD
Caution: *In case of order with cash on delivery, it may be shipped after the next day., *In case of order with cash on delivery, it may be shipped after the next day., *In case of order with cash on delivery, it may be shipped after the next day., *In case of order with cash on delivery, it may be shipped after the next day.
Category Roll Tap
Long steel roll tap
YAMAWA MFG
27.99 - 48.99 SGD
Screw Type: M, M, Caution: ※ In the case of COD orders there might be shipped after the next day.
Category Roll Tap
Steel roll tap (M)
YAMAWA MFG
24.99 - 119.90 SGD
Screw Type: M, M, Caution: ※ With regard to unaccompanied goods, in the case of COD orders will be shipped the next day or later
Category Roll Tap
New roll tap
OSG
59.99 - 85.99 SGD
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Titanium coating roll tap
YAMAWA MFG
25.99 SGD
ADD TO CART
Tolerance: G7, Pitch: 0.5, Pitch (mm): 0.5, Dimensions L (mm): 46, Grade: G7, Screw Diameter: M3, Dimension d (mm): 4, Nominal Designation: M3, Screw Type: M, Dimension l (mm): 9, Grade of Female Screws: 6H, Dimensions k (mm): 3.2, Convex number: 4, Dimensions lk (mm): 4, Manufacture'w product code: RVP73.0GB
Category Roll Tap
Titanium coating roll tap
YAMAWA MFG
25.99 SGD
ADD TO CART
Tolerance: G7, Pitch: 0.7, Pitch (mm): 0.7, Dimensions L (mm): 52, Grade: G7, Screw Diameter: M4, Dimension d (mm): 5, Nominal Designation: M4, Screw Type: M, Dimension l (mm): 11, Grade of Female Screws: 6H, Dimensions k (mm): 4, Convex number: 4, Dimensions lk (mm): 7, Manufacture'w product code: RVP74.0IB
Category Roll Tap
No grooved new roll tap for copper (CU - NRT)
OSG
35.99 - 76.99 SGD
Screw Type: M, Chamfer: 2P, Chamfer Lcf: 2P
Category Roll Tap
Titanium coating roll tap
YAMAWA MFG
25.99 SGD
ADD TO CART
Tolerance: G7, Pitch: 0.7, Pitch (mm): 0.7, Dimensions L (mm): 52, Grade: G7, Screw Diameter: M4, Dimension d (mm): 5, Nominal Designation: M4, Screw Type: M, Dimension l (mm): 11, Grade of Female Screws: 6H, Dimensions k (mm): 4, Convex number: 4, Dimensions lk (mm): 7, Manufacture'w product code: RVP74.0IP, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
New roll tap (for V coated thin plate) (V - SS - NRT)
OSG
38.99 - 48.99 SGD
Screw Type: M, Chamfer: 8P, Chamfer Lcf: 8P
Category Roll Tap
For T tough let stainless steel
TANOI MFG (TDT)
27.99 - 48.99 SGD
Surface Processing: C coating
Category Roll Tap
No groove tap New roll tap (steel for long shank) (LT-NRT)
OSG
28.99 - 109.90 SGD
Screw Type: M, M, Chamfer: 2P, 2P, Chamfer Lcf: 2P, 2P
Category Roll Tap
Carbide New roll tap (OT-NRT)
OSG
169.90 - 489.90 SGD
Screw Type: M, Chamfer: 2P, Chamfer Lcf: 2P, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Tafuretto - L
NACHI
179.90 - 329.90 SGD
Screw Type: M, Radial Number: 4, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
High roll tap (for nonferrous alloys) (B - HRT)
OSG
14.99 - 28.99 SGD
Chamfer: 2.5P
Category Roll Tap
Steel for New roll tap metric thread
YAMAWA MFG
12.99 SGD
Pitch: 0.5, Pitch (mm): 0.5, Dimensions L (mm): 46, Screw Diameter: M3, Dimension d (mm): 4, Nominal Designation: M3, Screw Type: M, Dimension l (mm): 9, Grade of Female Screws: 2B, Dimensions k (mm): 3.2, Convex number: 4, Dimensions lk (mm): 6, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Steel for New roll tap metric thread
YAMAWA MFG
35.99 SGD
Blade Diameter: 10, 10, Pitch: 1.5, 1.5, Pitch (mm): 1.5, 1.5, Screw Diameter: M10, M10, Screw Type: M, M, Shank Diameter d (phi mm): 7, 7, Chamfer: P, P, Shank Diameter (mm): 7, 7
Category Roll Tap
New roll tap for non-ferrous metric thread
YAMAWA MFG
12.99 SGD
Pitch (mm): 0.5, Dimensions L (mm): 46, Screw Diameter: M3, Dimension d (mm): 4, Screw Type: M, Dimension l (mm): 9, Grade of Female Screws: 6H, Dimensions k (mm): 3.2, Convex number: 4, Dimensions lk (mm): 6
Category Roll Tap
Roll Form Tap
TANOI MFG (TDT)
27.99 - 48.99 SGD
Category Roll Tap
High Roll Tap
OSG
12.99 - 22.99 SGD
Material: HSS (high speed steel) HSS, Surface Processing: Nitrogen treatment , Chamfer: 2.5P
Category Roll Tap
Roller tapped hole
YAMAWA MFG
12.99 - 19.99 SGD
Screw Type: M
Category Roll Tap
General purpose roll tap
YAMAWA MFG
9.39 - 16.99 SGD
Screw Type: M
Category Roll Tap
Roll tap stop hole
YAMAWA MFG
12.99 - 13.99 SGD
Screw Type: M
Category Roll Tap
Roll tap (M)
YAMAWA MFG
5.00(1)
12.99 - 43.99 SGD
Screw Type: M, M, M, Caution: *In case of order with cash on delivery, it may be shipped after the next day., *In case of order with cash on delivery, it may be shipped after the next day., *In case of order with cash on delivery, it may be shipped after the next day., *In case of order with cash on delivery, it may be shipped after the next day.
Category Roll Tap
Steel roll tap (for blind holes)
YAMAWA MFG
12.99 - 24.99 SGD
Screw Type: M, Chamfer: 2P, Purpose: For blind hole machining.  Workpiece: iron, carbon steel., Caution: This product is manufactured in Japanese standards. Please check the specification before you order., ※ under drilling will greatly affect the screw of accuracy. Please be careful under drilling.
Category Roll Tap
High roll tap (non-ferrous)
OSG
12.99 - 22.99 SGD
Category Roll Tap
New roll tap (non-ferrous)
OSG
14.99 - 35.99 SGD
Screw Type: M
Category Roll Tap
Non-ferrous roll taps (for through holes)
YAMAWA MFG
12.99 - 13.99 SGD
Category Roll Tap
Steel roll tap (M)
YAMAWA MFG
16.99 SGD
Screw Type: M, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Non-ferrous roll tap (for blind holes)
YAMAWA MFG
13.99 SGD
ADD TO CART
TRUSCO Part Number: 397-5029, Overall Length (mm): 46, Pitch (mm): 0.45, Nominal Dimension: M2.6, Grade: G5, Screw Diameter: M2.6, Shank Diameter (phi mm): 3, Pilot Hole Diameter (phi mm): 2.375, Screw Length (mm): 8, Screw Type: M, Pricision: G5, Chamfer: 2P, Shank Diameter (mm): 3, Shank Square Part (mm): 2.5, Manufacture'w product code: NRS52.6FB, Purpose: Work material for blind hole machining: copper, brass, aluminum rolled material, aluminum alloy casting, zinc die casting, Caution: * Drill hole machining will greatly influence the accuracy of the screw. Please pay attention to pilot hole processing.
Category Roll Tap
New roll tap (TiN coating) (TIN-NRT) Unified screw
OSG
48.99 SGD
ADD TO CART
Nominal Dimension: UNF No.10-32, Screw Diameter: UNF No.10-32, Overall Length L (mm): 60, Screw Type: UNF, Pricision: RH5, Shank Diameter d (phi mm): 5.5, Number of Threads per inch: 32, Chamfer: 2P, Lower Neck Part L1 (mm): 22, Screw Length Lc (mm): 11, Angle Width K (mm): 4.5, Angle Length Lk (mm): 7, Chamfer Lcf: 2P, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Proto tip S PLUS rolling tap (TIN Court)
Walter
1.00(1)
54.99 - 129.90 SGD
Screw Type: M, Pricision: 6H, Number of Chamfered Threads: 2-3.5, Chamfer: 2-3.5
Category Roll Tap
T-TF
TANOI MFG (TDT)
27.99 - 48.99 SGD
Work Material: Iron, aluminum, die-cast, stainless steel alloy , Surface Processing: TiCN coating , Chamfer Lc: P
Category Roll Tap
High roll tap (for nonferrous alloys) (B - HRT)
OSG
14.99 - 28.99 SGD
Screw Type: M, Chamfer: 4P
Category Roll Tap
High Roll Tap
OSG
12.99 - 19.99 SGD
Screw Type: M, Chamfer: 4P
Category Roll Tap
Non Ferrous Metal Rolltop, N+RS
YAMAWA MFG
5.00(2)
12.99 - 13.99 SGD
Category Roll Tap
New roll tap (VP New roll short chamfer form Long Shank) (VP-LT-SC-NRT)
OSG
46.99 - 69.99 SGD
Chamfer: 1P, Chamfer Lcf: 1P, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
New roll tap (with V-coating the inside diameter finishing edges) (V-EG-NRT)
OSG
46.99 - 129.90 SGD
Screw Type: M, Chamfer: 4P, Chamfer Lcf: 4P, 2015 Trusco Published Pages: 1 0356, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
New roll tap (long shank for V coating deep hole) (V-LT-DH-NRT)
OSG
53.99 - 69.99 SGD
Screw Type: M, Chamfer: 2P, Chamfer Lcf: 2P
Category Roll Tap
Roll Tap
OSG
38.99 - 54.99 SGD
Surface Processing: V coating (composite multi-layer coating) , Chamfer Lcf: 1P
Category Roll Tap
VP Nu-Roll Tap Long Shank, VP-LT-NRT
OSG
46.99 - 169.90 SGD
Material: Powdered high-speed, Surface Processing: V coating (composite multi-layer coating)
Category Roll Tap
For Tafuretto steel
NACHI
169.90 - 389.90 SGD
Screw Type: M, M
Category Roll Tap
No groove tap (long shank for nonferrous alloy) (LT - B - NRT)
OSG
28.99 - 109.90 SGD
Screw Type: M, Chamfer: 2P, Chamfer Lcf: 2P
Category Roll Tap
New roll tap (with V coating inner diameter finishing blade) (V-EG-NRT)
OSG
46.99 - 129.90 SGD
Screw Type: M, Chamfer: 2P, Chamfer Lcf: 2P
Category Roll Tap
X Performer Rolled Tap S-XPF
OSG
37.99 - 54.99 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
SU Roll Tap
YAMAWA MFG
43.99 - 59.99 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Gouling flute rest tap Athlete M8X1.25
Guhring
38.99 SGD
ADD TO CART
Overall Length (mm): 70, Pitch (mm): 1.25, Nominal Dimension: M8, Screw Length (mm): 12.5, Pricision: RH7, Number of Chamfered Threads: 2-3, Shank Diameter (mm): 6.2, Shank Square Part (mm): 5, Purpose: For blind hole and through hole processing. Work material: aluminum, copper, stainless steel, ductile steel., Caution: * Drill hole machining will greatly influence the accuracy of the screw. * Please pay attention to pilot hole processing., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
High roll tap (for steel)
OSG
22.99 - 32.99 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
New roll tap (V coating)
OSG
28.99 - 96.99 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
UM New Roll Tap (For Extra Small Diameter Thread)
OSG
64.99 - 87.99 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
VP New Roll Tap
OSG
38.99 - 45.99 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
VP New Roll Tapping (Short Screw Type)
OSG
38.99 - 49.99 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
No Groove Tap X Performer
OSG
37.99 - 199.90 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Roll tap blind hole
YAMAWA MFG
12.99 - 22.99 SGD
Purpose: Workpiece: iron, carbon steel, stainless steel., Caution: This product is manufactured in Japanese standards. Please check the specification before you order., ※ under drilling will greatly affect the screw of accuracy.  Please be careful to lower drilling ※.
Category Roll Tap
Roll Tapped through hole
YAMAWA MFG
12.99 - 22.99 SGD
Number of Chamfered Threads: 4, Purpose: For through hole machining. Work material: copper, brass, aluminum rolled material, aluminum alloy casting, zinc die casting., Caution: * Drill hole machining will greatly influence the accuracy of the screw. *Please pay attention to pilot hole processing.
Category Roll Tap
TiAlN cemented carbide rolled tap
Guhring
179.90 - 969.90 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
For medium hardness carbon steel roll tap for blind hole
YAMAWA MFG
49.99 - 179.90 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
For medium hardness carbon steel roll tap through hole
YAMAWA MFG
49.99 - 179.90 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
X Performer Rolled Tap
OSG
58.99 - 1,299.00 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
New roll tap (Ultra synchro tap)
OSG
38.99 - 279.90 SGD
Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Miniature screw tap
YAMAWA MFG
-
Pitch (mm): 0.175, Nominal Dimension: S0.7, Grade: G3, Screw Diameter: S0.7, Screw Type: S, Manufacture'w product code: RS30.7-B, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Tin coating roll tap
YAMAWA MFG
-
Screw Type: M
Category Roll Tap
OILES ROLL TAP
YAMAWA MFG
5.00(1)
-
Category Roll Tap
High Performance Roll Tap
YAMAWA MFG
-
Screw Type: M
Category Roll Tap
Oil less roll tap OL-RZ
YAMAWA MFG
-
Shape: c, Grade: G6, Number of Flutes: 4, Chamfer: 4P, Shank Square Part Length (mm): 7
Category Roll Tap
Steel for New roll tap metric thread
YAMAWA MFG
-
Pitch: 0.35, Pitch (mm): 0.35, Dimensions L (mm): 36, Grade: G4, Screw Diameter: M1.6, Dimension d (mm): 3, Nominal Designation: M1.6, Dimension l (mm): 8, Dimensions k (mm): 2.5, Tolerance (micro m): 51-38, Dimensions Lk (mm): 5, Convex number: 3, Manufacture'w product code: NRZ41.6DB, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Roll Tap
Non-ferrous for New roll tap metric thread
YAMAWA MFG
-
Pitch (mm): 0.35, Dimensions L (mm): 36, Screw Diameter: M1.6, Dimension d (mm): 3, Screw Type: M, Dimension l (mm): 8, Dimensions k (mm): 2.5, Convex number: 3
Category Roll Tap

1