Buy more than* S$200* and get FREE SHIPPING
--Note--
Due to the heavy typhoon attacked to Japan on Sep/4/2018,
Items will be shipped from Narita International Airport(NRT) or Chubu Centrair International Airport(NGO),
which normally should have been shipped from Kansai International Airport(KIX).
It may cause delay on shipment. Sorry to have kept you waiting and thank you very much for your understandings.

Binding Supplies

Sort by:
Showing 1 - 90 of 626 Results
Show: 30 60 90
VIEW: Grid View List View
Stapler for Book Binding In Center
MAX
88.99 SGD
ADD TO CART
Needle Loading Method: Magazine slide system, Nail Loading Number (pieces): 50, Maximum Stapling Depth (mm): 310, Filing Capacity: 30 sheets, Dimensions (Height H x Width W x Depth D) (mm): 130x80x500, Weight (kg): 1.49, Compatible: (Needle) No.3-1M / No.3-3M
Category Binding Supplies > Staplers
Stapler Without Staples, Harinacs, 2-Hole Type
KOKUYO
5.00(1)
89.99 SGD
ADD TO CART
Caution: It does not have the equivalent holding power of staplers which use staples. There is a hole when the paper is closed. Cannot be used on items with adhesives other than paper such as film, etc. Please test on unwanted paper before using. Plea, Hole Dimension (mm): (Stitch hole)6 x 15, Number of Sheets: (Stitch) PPC paper: about 10, Depth (mm): (Stitch hole)13, Pitch (mm): 80, Color: Black, Material: (Handle cover/ front cover/ top cover/ side gauge/ side cover/ base) R-ABS 100% (Stitch hole position checking gauge) PC (Duster case) PP
Category Binding Supplies > Needleless Staplers
Stapler "Vaimo 80"
MAX
5.00(2)
59.99 SGD
Caution: Please use the needles No.11 (No.11-1M).Cannot use other needles such as No.10 needles, etc., Nail Loading Number (pieces): 100, Filing Capacity: 2-80 Cards, Body Dimensions (Length x Width x Height) (mm): 202x63x153, Weight (g): 690, Dimension (mm): (Stitch mouth)13.5, Compatible: (Needle) No.11-10MM, No.11-1mm
Category Binding Supplies > Staplers
1 Hole Punch
Nakabayashi
4.33(3)
3.99 SGD
ADD TO CART
Drilling Capability: About 20 pieces of PPC paper, Dimensions (Width W x Depth D x Height H) (mm): 27x97x35 (at handle locked), Weight (g): 115, Color: Matt Blue
Category Binding Supplies > Punch > Punch
Large Stapler
MAX
4.00(1)
84.99 SGD
ADD TO CART
Recycled Materials Utilization Rate (% ): 60, Needle Loading Method: Magazine slide method, Nail Loading Number (pieces): 100, Maximum Stapling Depth (mm): 60, Filing Capacity: 50-110 pieces (1210FA-H use) 30 - 70 pieces (1213FA-H is used), Dimensions (Height H x Width W x Depth D) (mm): 185x85x325, Color: Gray, Weight (kg): 1.43, Compatible: (Needle) 1210FA-H, 1213FA-H, Accessories: Remover
Category Binding Supplies > Staplers
Crocodile Clips
KOKUYO
5.00(1)
4.99 - 8.99 SGD
Category Binding Supplies > Clips > Clip Stand-in
Holder type clip click with scan magnet
TRUSCO
5.99 - 7.99 SGD
Category Binding Supplies > Clips
2 Hole Punch
Nakabayashi
4.67(6)
4.99 - 16.99 SGD
Color: Matt Blue
Category Binding Supplies > Punch > Punch
Magnet box
CROWN (Office Supplies)
4.25(4)
3.99 SGD
ADD TO CART
Outer Dimensions (Wide x Long x Height)(mm): 44x44x67, Accessories: Paper clips 50g (about 127 pieces)
Category Binding Supplies > Clips > Zem Clips
Powerful Punch
LOF
4.50(2)
129.99 SGD
ADD TO CART
Caution: Color may be different., 2 Hole, Hole Diameter (mm): 6, Drilling Depth (mm): 9, Hole Intervals (mm): 80, Perforation Thickness (mm): 15, Perforation Capacity (Number of Sheets): 165, Dimensions (Width x Length x Height ) (mm): 170x338x175, Weight (kg): 2.7, Description 2: Even with wide gauge, large amounts of documents easily hole boring was possible., Accessories: With wide double gauge
Category Binding Supplies > Punch > Punch
Carl Powerful Hole Punch Blade
LOF
13.99 SGD
ADD TO CART
Compatible Models: NO.122, NO.124, NO.122N
Category Binding Supplies > Punch > Punched Holes Reinforcement Supplies
Drill Punch, 1 Hole
OPEN INDUSTRIES
4.60(5)
40.99 SGD
ADD TO CART
Drilling Capability: 166 sheets (14.0mm), Dimensions (Width W x Depth D x Height H) (mm): 111X93X73, Weight (g): 645, Material: Base: iron (cast), 受底: Play PE, handle: PA, cap: PS
Category Binding Supplies > Punch > Punch
Jumbo Paper Clip
SANKEI KIKOM
4.00(2)
3.99 SGD
ADD TO CART
2014 TRUSCO Published Page: 2-3110, Weight (g): 164, Size: Jumbo , Dimension (mm): 50, TRUSCO Part Number: 409-1736
Category Binding Supplies > Clips > Zem Clips
Vertical And Horizontal Stapler Hoping Hd-10 V
MAX
4.80(5)
7.99 SGD
Category Binding Supplies > Staplers
Twist Ring Punch
LIHIT LAB
5.00(1)
7.99 SGD
ADD TO CART
Perforation Capacity (Number of Sheets): Up to Copy Paper (64g/m2) 1 sheet, Depth (mm): 118, Height (mm): 9, Color: Black, Width (mm): 54, Material: Body/ABS resin, Blade/Stainless
Category Binding Supplies > Punch > Punch
Hole Puncher Blade Stopper
LOF
4.99 SGD
ADD TO CART
Weight (g): 37, Color: Dark gray, Compatible Models: NO.86/90/120N/122/122N/123/123-L/124/160 HD-410/HD-430/HD-410N/HD-430N
Category Binding Supplies > Punch > Punched Holes Reinforcement Supplies
Staple Needle No. 10 Needles
KOKUYO
5.00(4)
1.99 - 4.99 SGD
Needle Length (mm): 5, Size: No. 10 needle, Width (mm): 8.4, Material: Mild steel wire rods, Compatible: SL-M13, M14, MF23, M63N, M73N, MF83, F-WBB101, WBB106
Category Binding Supplies > Staple Needles
Needle-free Stapler
KOKUYO
10.99 SGD
Binding Opening Dimensions (mm): 5x7.9, External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): 32x121x100
Category Binding Supplies > Needleless Staplers
Powerful Stapler
KOKUYO
6.99 SGD
Green Purchasing Law: Fit , Nail Loading Number (pieces): 100, Materials (cover): R-ABS, External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): 29x80x64, Compatible: No. 10 needle
Category Binding Supplies > Staplers
Large Thick Stitch Stapler
MAX
149.99 SGD
ADD TO CART
Purpose: For 30-170 sheets, Recycled Materials Utilization Rate (% ): 60, Needle Loading Method: Magzine slide system, Nail Loading Number (pieces): 100, Maximum Stapling Depth (mm): 68, Filing Capacity: 30-70 sheets (when using 1210 FA-H) 50-110 sheets (when using 1213 FA-H) 110-170 sheets (when using FA-H 1217), Dimensions (Height H x Width W x Depth D) (mm): 215x90x390, Color: Gray, Weight (kg): 2.16, Compatible: (Needle)1210 FA-H, 1213 FA-H, 1217-FA-H, Accessories: Remover
Category Binding Supplies > Staplers
While With Adhesive Binding for Stapler
MAX
4.60(5)
36.99 SGD
ADD TO CART
Needle Loading Method: One-touch open system, Nail Loading Number (pieces): 100, Maximum Stapling Depth (mm): 235, Filing Capacity: About 15 sheets (Maximum.), Dimensions (Height H x Width W x Depth D) (mm): 55x43x309, Weight (g): 380, Color: Black, Compatible: (Needle) No.10-1M / No.10-2M / No.10-5M
Category Binding Supplies > Staplers
Powerful Hole Punch Blade, PN-33
KOKUYO
27.99 SGD
ADD TO CART
Weight (g): 4, Dimension (mm): phi10x22
Category Binding Supplies > Punch > Punched Holes Reinforcement Supplies
Stapler Needle No. 3
MAX
5.00(7)
5.99 SGD
ADD TO CART
Number of Staples per pcs: 50, Needle Length (mm): 10, Size: No. 3 needle, Width (mm): 11.5, TRUSCO Part Number: 423-7676, Compatible: HD-3D/3DFR
Category Binding Supplies > Staple Needles
Binder Clips
ESCO
2.99 - 3.99 SGD
Category Binding Supplies > Clips
Staples Needle Plier Type Needle 2115 1 / 4 L
MAX
4.67(6)
7.99 - 25.99 SGD
Width (mm): 10.5
Category Binding Supplies > Staple Needles
Fritillary 11 Flat
MAX
5.00(5)
18.99 SGD
Caution: Please use the exclusive No. 11 needle (No. 11-1M). Cannot use the traditional No. 10 needles. No. 11 needles are included with each box., Nail Loading Number (pieces): 100, Body Dimensions (Length x Width x Height) (mm): 107x30x68, Specification: Needle/ No.11-1M
Category Binding Supplies > Staplers
The Stapler-Needles No. 11 Needle
MAX
1.99 - 5.99 SGD
Needle Length (mm): 6, Width (mm): 10.4
Category Binding Supplies > Staple Needles
My Tag Punch Label
NICHIBAN
4.75(4)
2.99 SGD
ADD TO CART
Adhesive: Acrylic type, Outer Diameter (phi mm): 14.5, Base Material: Polyester film, Inner Diameter (phi mm): 6, Color: White, Application: For repair and reinforcement of punched holes.
Category Binding Supplies > Punch > Punch
Stapler Without Staple, 12 Sheets On Desktop
KOKUYO
3.00(1)
44.99 SGD
ADD TO CART
Caution: It does not have the equivalent holding power of staplers which use staples. There is a hole when the paper is closed. Cannot be used on items with adhesives other than paper such as film, etc. Please test on unwanted paper before using. Plea, Hole Dimension (mm): (Stitch hole)5.5 x 10.5, Number of Sheets: (Stitch) PPC paper: about 12, Depth (mm): (Stitch hole)8.5, 13 (2-step), Color: Black, Material: (Body) steel plate (Handle cover/ base/ top cover/ side gauge) R-ABS (Blade) stainless steel
Category Binding Supplies > Needleless Staplers
Card Ring Color Mix
KOKUYO
2.99 - 33.99 SGD
Category Binding Supplies > Card Rings
Double Clip
SANKEI KIKOM
4.33(3)
0.99 - 6.99 SGD
Purpose: For document filling clip
Category Binding Supplies > Clips > Double Clips
Double Ring
SANKEI KIKOM
4.50(4)
9.99 - 17.99 SGD
Category Binding Supplies > Card Rings
Stapler Needls : Small Type
MAX
0.99 - 15.99 SGD
Needle Length (mm): 5, Size: No. 10 needle, Width (mm): 8.4
Category Binding Supplies > Staple Needles
The Stapler-Needles No. 3 Needle
MAX
1.99 - 4.99 SGD
Number of Staples per pcs: 50, Needle Length (mm): 6, Size: No. 3 needle, Width (mm): 11.5
Category Binding Supplies > Staple Needles
Stapler Staples No. 3
KOKUYO
4.50(4)
1.99 SGD
ADD TO CART
Needle Length (mm): 6, Package Quantity: 1000 (50x20), Size: No. 3 needle, Width (mm): 11.5
Category Binding Supplies > Staple Needles
Double Clip
Kutsuwa
5.00(2)
4.99 - 24.99 SGD
Category Binding Supplies > Clips > Double Clips
Double Clip
CROWN (Office Supplies)
3.25(4)
1.99 - 15.99 SGD
Category Binding Supplies > Clips > Double Clips
Stapler Needles, No. 11, Fritillaria 80 Only
MAX
5.00(1)
2.99 SGD
ADD TO CART
Needle Length (mm): 10, Compatible Models: Vaimo80 only
Category Binding Supplies > Staple Needles
2 Hole Punch Force 1/2
PLUS
3.50(2)
23.99 - 24.99 SGD
Category Binding Supplies > Punch > Punch
Stapler
KOKUYO
3.67(3)
4.99 SGD
External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): 20x93x37, Specification: Law on Promoting Green Purchasing compliant. 50pcs load type
Category Binding Supplies > Staplers
Holder type clip Clicks without magnet
TRUSCO
4.88(8)
4.99 - 12.99 SGD
Category Binding Supplies > Clips
Super Thick Stitch Stapler
MAX
279.99 SGD
ADD TO CART
Recycled Materials Utilization Rate (% ): 60, Needle Loading Method: Magazine slide system, Nail Loading Number (pieces): 100, Maximum Stapling Depth (mm): 68, Filing Capacity: 50-110 sheets (when using 1213 FA-H) 110-170 sheets (when using 1217 FA-H) 150-200 sheets (when using 1220 FA-H) 200-240 sheets (when using 1224 FA-H), Dimensions (Height H x Width W x Depth D) (mm): 250x90x390, Color: Gray, Weight (kg): 2.26, Compatible: (Needle)1213 FA-H, 1217 FA-H, 1220-FA-H
Category Binding Supplies > Staplers
Powerful Punch
KOKUYO
3.67(6)
89.99 SGD
ADD TO CART
Caution: Structural, dust may be spilled, so be careful., Perforation Capacity (Number of Sheets): PPC paper about 70 (6.4mm), Dimensions (Width W x Depth D x Height H) (mm): 178x225x118, Depth (mm): (Perforated) 13, Pitch (mm): 80, Hole Diameter (phi mm): 6, Weight (kg): 1.29, Material: Body cover: R-ABS, body: steel/aluminum die cast, hadle: aluminum die cast, Accessories: Blades x 2, blade receiver x 2
Category Binding Supplies > Punch > Punch
Card Ring
CROWN (Office Supplies)
2.00(4)
17.99 - 32.99 SGD
Purpose: Plastic sheeting or cardboard pattern books, including, Material: Hard steel wire Nickel-plated finish
Category Binding Supplies > Card Rings
Double Ring in Plastic Case
CROWN (Office Supplies)
1.99 SGD
Material: Hard steel wire Nickel-plated finish
Category Binding Supplies > Card Rings
Midium Size Stapler
MAX
5.00(1)
33.99 - 34.99 SGD
Green Purchasing Law: Conformity, Nail Loading Number (pieces): 150(No.3-1M/No.3-3M), 200(No.35-2M), Maximum Stapling Depth (mm): 75, Filing Capacity: 30, Dimensions (Width x Length x Height ) (mm): 45x184x80, Weight (g): 500, Specification: Product conforming to Law on Promoting Green Purchasing
Category Binding Supplies > Staplers
Remover, No. 10 Staple Remover
KOKUYO
4.20(5)
5.99 SGD
Green Purchasing Law: Compatible , Outer Dimensions (Width x Depth x Height)(mm): 136x14x12, Standard: Compliable with Act on Promoting Green Purchasing, Material: Body/R-ABS, Usage: 1. Insert remover under needle by following direction. Slide horizontally to front and remove the needle. 2. When the needle has accumulated about 10 throw away needles by pushing the upper slider body., Compatible: No. 10 needle
Category Binding Supplies > Stapler Removers
Pita Hit
PLUS
2.33(6)
3.99 SGD
Nail Loading Number (pieces): 100, Maximum Stapling Depth (mm): 20 (with depth navigation ), Filing Capacity: (PPC Paper) 2-20 sheets, Dimensions (Width W x Depth D x Height H) (mm): 96x25x48, Weight (g): 50, Material: 80% Recycled plastic (handle 100% recycled ABS ), Compatible: Needle used/ No.10
Category Binding Supplies > Staplers
Color Paper Clip, Input Plastic Case
KOKUYO
3.00(1)
1.99 SGD
ADD TO CART
Type: Big, Color: Assortment of 5 colors (Blue, Red, Yellow, Green and Pink), Overall Length (mm): 28, Material: COAT COVER/PE
Category Binding Supplies > Clips > Zem Clips
2 Hole Punch Blue
OPEN INDUSTRIES
3.67(3)
7.99 - 9.99 SGD
Category Binding Supplies > Punch > Punch
2-Hole Black Punch
OPEN INDUSTRIES
19.99 SGD
Drilling Capability: 34 sheets (3.0mm) , Dimensions (Width W x Depth D x Height H) (mm): 116x137x115, Weight (g): 550
Category Binding Supplies > Punch > Punch
Letter Clip
SANKEI KIKOM
2.00(1)
12.99 - 22.99 SGD
Category Binding Supplies > Clips > Buldog Clip
Punch Arishis
LOF
5.00(3)
8.99 SGD
2 Hole, Hole Diameter (mm): phi6, Hole Intervals (mm): 80, Perforation Capacity (Number of Sheets): 16, Weight (g): 240
Category Binding Supplies > Punch > Punch
Metal Paper Clamps
CROWN (Office Supplies)
2.99 - 3.99 SGD
Category Binding Supplies > Clips > Buldog Clip
Midium Size Stapler
MAX
4.75(4)
48.99 SGD
ADD TO CART
Green Purchasing Law: Conform, Loading Method: Magazine sliding method, Nail Loading Number (pieces): 100, Maximum Stapling Depth (mm): 58, Filing Capacity: 30(No.3-1M/No.3-3M), 75(No.3-10mm), Dimensions (Width x Length x Height ) (mm): 71x260x153, Weight (g): 740, Color: Blue, TRUSCO Part Number: 423-7650, Compatible: Used needle (needle 3) No.3-1M, No.3-3M, and No.3-10mm., Specification: Green Purchasing Law compatible good
Category Binding Supplies > Staplers
Double Layered Ring Pack
KOKUYO
4.80(5)
1.99 SGD
Category Binding Supplies > Card Rings
Staple Needle Large No.12 1213 FA-H
MAX
5.00(3)
7.99 SGD
Number of Staples per pcs: 100, Size: No. 12 needle, Width (mm): 11.5
Category Binding Supplies > Staple Needles
Crocodile Shell
KOKUYO
5.99 - 18.99 SGD
Category Binding Supplies > Clips > Clip Stand-in
Staple Needle U
KOKUYO
5.99 SGD
ADD TO CART
Needle Length (mm): 10, Size: No. 3 U needle, Width (mm): 11.5, Material: Mild steel wire rod, Compatible: SL-M34, M36, M134, M136
Category Binding Supplies > Staple Needles
Two hole punch black
OPEN INDUSTRIES
27.99 - 29.99 SGD
Category Binding Supplies > Punch > Punch
Powerful Punch
KOKUYO
199.99 SGD
ADD TO CART
Caution: Structural, dust may be spilled, so be careful., Perforation Capacity (Number of Sheets): PPC paper About 180 (16mm) , Dimensions (Width W x Depth D x Height H) (mm): 194x355x152, Depth (mm): (Perforation) 13 , Pitch (mm): 80, Hole Diameter (phi mm): 6, Weight (kg): 3, Material: Bodycovergrip:R-ABS,body:aluminumdie-castingsteel,handle:aluminumdie-casting, Accessories: Two tooth rest blade two
Category Binding Supplies > Punch > Punch
Stapler, Plier Type
MAX
4.67(3)
64.99 SGD
ADD TO CART
Needle Loading Method: Magazine sliding method, Nail Loading Number (pieces): 210, Maximum Stapling Depth (mm): 64, Height H x Width W x Length L (mm): 80x24x204, Weight (g): 309
Category Binding Supplies > Staplers
Double Ring
CROWN (Office Supplies)
4.60(5)
9.99 - 15.99 SGD
Material: Hard steel wire Nickel-plated finish
Category Binding Supplies > Card Rings
Punch-hole Reinforcement Stamp
KOKUYO
5.00(2)
5.99 SGD
Category Binding Supplies > Punch > Punch
Stapler
KOKUYO
5.00(1)
19.99 SGD
ADD TO CART
Green Purchasing Law: Compatible , Outer Dimensions (Width x Depth x Height)(mm): 51x157x87, Maximum Stapling Depth (mm): 30, Filing Capacity: PPC paper: about 2 - 30 sheets, Standard: Compliable with Act on Promoting Green Purchasing, Material: BODY / STEEL PLATE, HANDLE, BASE COVER AND GAUGE CAP /R-ABS, Compatible: No. 3 needle, Specification: 150pcs refilling type (tabletop, large)
Category Binding Supplies > Staplers
Clips
KOKUYO
0.99 - 7.99 SGD
Category Binding Supplies > Clips > Zem Clips
Curdling, With Pack
KOKUYO
4.67(3)
2.99 SGD
Material (Body): Mild steel wire rods (nickel plated)
Category Binding Supplies > Card Rings
James Clip
SANKEI KIKOM
0.99 - 1.99 SGD
Purpose: Gem clip.
Category Binding Supplies > Clips > Zem Clips
Cone (for manual punch)
LIHIT LAB
5.00(1)
36.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Drilling Ability (mm): 15mm, Hole Diameter (mm): 6
Category Binding Supplies > Punch > Electric Punch > Options
Protective plate
LIHIT LAB
5.00(1)
5.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Size: phi25mm
Category Binding Supplies > Punch > Electric Punch > Options
Protective plate
LIHIT LAB
12.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Size: 297x63mm
Category Binding Supplies > Punch > Electric Punch > Options
Protection plate
LIHIT LAB
8.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
Category Binding Supplies > Punch > Electric Punch > Options
Protective plate
LIHIT LAB
5.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Size: phi25mm
Category Binding Supplies > Punch > Electric Punch > Options
Cone (for paper drill)
LIHIT LAB
5.00(2)
38.99 - 52.99 SGD
Category Binding Supplies > Punch > Electric Punch > Options
Cone (for electric punch)
LIHIT LAB
37.99 - 40.99 SGD
Drilling Ability (mm): 25
Category Binding Supplies > Punch > Electric Punch > Options
Cone (electric punch)
LIHIT LAB
54.99 SGD
ADD TO CART
Hole Diameter (mm): 4, 4
Category Binding Supplies > Punch > Electric Punch > Options
Cone (for electric punch)
LIHIT LAB
36.99 - 37.99 SGD
Drilling Ability (mm): 32
Category Binding Supplies > Punch > Electric Punch > Options
Drill (for auto punch)
LIHIT LAB
53.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Drilling Ability (mm): 50mm, Hole Diameter (mm): 6
Category Binding Supplies > Punch > Electric Punch > Options
Punch
MonotaRO
2.99 SGD
ADD TO CART
2 Hole, Hole Diameter (mm): 6, Drilling Depth (mm): 13, Hole Intervals (mm): 80, Perforation Capacity (Number of Sheets): 10, Weight (g): 152
Category Binding Supplies > Punch > Punch
Punch Hole Reinforcement Label
KOKUYO
4.60(5)
5.99 SGD
ADD TO CART
Outer Diameter (phi mm): 14.5, Hole Diameter (phi mm): 6, Color: Transparency, Thickness (mm): 0.05, Material: PET, Specification: Standard size
Category Binding Supplies > Punch > Punched Holes Reinforcement Supplies
Binder Clips
SANKEI KIKOM
4.00(2)
3.99 - 5.99 SGD
2014 TRUSCO Published Page: 2-3111, Size: Yellow
Category Binding Supplies > Clips > Double Clips
Powerful 2-hole punch
OPEN INDUSTRIES
139.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Hole Pitch (mm): 80, Drilling Depth (mm): 13, Dimensions (Width W x Depth D x Height H) (mm): 140x405x428, Hole Diameter (phi mm): 6, Weight (kg): 2.55, TRUSCO Part Number: 400-6097
Category Binding Supplies > Punch > Punch
Clip Box
OPEN INDUSTRIES
4.00(3)
3.99 - 5.99 SGD
Category Binding Supplies > Clips > Zem Clips
Punch, Assist Link System
LOF
5.00(8)
12.99 SGD
2 Hole, Hole Diameter (mm): phi6, Hole Intervals (mm): 80, Perforation Capacity (Number of Sheets): 20, Dimensions (Width x Length x Height ) (mm): 134 x 101 x 94 (at handle locked 45), Weight (g): 340
Category Binding Supplies > Punch > Punch
Metal Paper Clamps
KOKUYO
4.50(2)
21.99 - 35.99 SGD
Category Binding Supplies > Clips > Buldog Clip
Middle Size Stapler
MonotaRO
41.99 SGD
ADD TO CART
Needle Loading Method: Magazine slide method, Nail Loading Number (pieces): 100, Maximum Stapling Depth (mm): 70, Filing Capacity: 70 sheets (30 sheets with a needle length 6mm, 70 pieces with a needle length 10mm) - 2 at 75g / m 2 paper, Weight (g): 879, Compatible: No. 3 needle
Category Binding Supplies > Staplers
Middle Size Staple, Remover
MAX
76.99 SGD
ADD TO CART
Green Purchasing Law: Fit, Nail Loading Number (pieces): 100, Maximum Stapling Depth (mm): 50, Filing Capacity: 25 (No.3-1M ? No.3-3M), 75 (No.3-10), Dimensions (Width x Length x Height ) (mm): 84x304x178, Weight (g): 790, Color: Blue, Compatible: Needle No3, Specification: Product that complies with "Law on Promoting Green Purchasing", Accessories: Remover
Category Binding Supplies > Staplers
Zem Clip
ESCO
4.99 SGD
Category Binding Supplies > Clips > Zem Clips
Electronic Stapler Needle
MAX
5.00(1)
11.99 SGD
ADD TO CART
Needle Length (mm): 5.55, Size: 20.3mm, Width (mm): 9.2, Compatible: Electronic Stapler: EH-20
Category Binding Supplies > Staple Needles
100mm paper clip
ESCO
35.99 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Purpose: So powerful you can use for a variety of applications., Mouth Width (mm): 100, ESCO Part Number: EA762FB-100
Category Binding Supplies > Clips

1 2 3 4 5 6 7 Next

Filing Supplies Related Products

Related Products