Buy more than* S$200* and get FREE SHIPPING

Pneumatic Tools

Sort by:
Showing 1 - 90 of 1,649 Results
Show: 30 60 90
VIEW: Grid View List View
Micro Hand Tool
UHT
5.00(1)
409.99 SGD
ADD TO CART
Purpose: For precise grinding and polishing job, Supply Air Pressure (kgf/cm3): 6+/-1, Hose Connection Diameter: PT 1/4, Shank Axis: 3mm, Exhaust System: Backwards, Air Consumption (NL/min): 120, Body Weight (g): 130, Switching Method: Grip control valve, Maximum Rotation Speed (min-1[r. p.m]): 65000, Type: Straight type, Overall Length (mm): 143, Set Contents: Msg-3BSN body-10 phi with wheel 1 / 13 with a phi shaft Nyusofu2 strap-25 phi foil-Nyusofu trap (# 240, # 320, # 400, # 600, # 800, 1000, 1500 1 of each), with Stepin, spanner 1 each, air hose (1.5 m) 1 book ,over hose , filter 1 internal hose joint, case
Category Pneumatic Tools > Grinder > Micro Grinder
Super Hand
NITTO KOHKI
3.00(1)
589.99 SGD
ADD TO CART
Purpose: For deburring work, metal grinding, correction work, Maximum Mounting Shaft Diameter (phi mm): 5, No-load Stroke Length (mm): 9, No-oad Stroke Number (min-1): 6300, Working Pressure (MPa [kgf/cm2]): 0.6[6], Air Consumption (m3/min): 0.2, Weight (kg): 0.5, Overall Length (mm): 182 (main part), TRUSCO Part Number: 351-4579, Specification: Pneumatic small file for formatting, Accessories: SF-13 flat file : 1pc SF-13 round file : 1pc SF-11Triangular type file : 1pc SF-13 round intep file : 1pc Hex wrench 2.5mm : 1pc Sanding pad:1pc coupler HA-65SN:1pc
Category Pneumatic Tools > Cutting and Bending > Air Saw
Air Nailer & Stapler
ANEST IWATA CAMPBELL
4.67(3)
119.99 SGD
ADD TO CART
Purpose: Interior (finish), furniture, woodwork, Compatible Staples: 4 mm in width x 25 mm in length (maximum), Staple Length (mm): (Staple) 25, (Nail) 30, Number of Staple Charge: (Nail) 100, Working Pressure (MPa): Maximum/0.69, Dimensions (Width W x Height H) (mm): 275 x 220, Weight (kg): 1.25, Accessories: Oil, hexagonal wrench
Category Pneumatic Tools > Nailing
Air Impact Wrench
SHINANO
5.00(2)
409.99 SGD
ADD TO CART
Hose Mounting Nozzle: Rc1/4, Ability Bolt Diameter (mm): 16, Socket Plug Insertion Angle (mm): 12.7, Exhaust System: Backward, Maximum Tightening Torque (N m): 460, Air Consumption (m3/min): 0.38, Working Pressure (MPa): 0.48 to 0.68, No Load Rotation Speed (min-1[r.p.m]): 8000, Weight (kg): 1.04, Overall Length (mm): 148, TRUSCO Part Number: 337-6320, Specification: Twin hammer
Category Pneumatic Tools > Tightening and Drilling > Impact Wrenches
Mini Grinder
CUSTOR
4.00(2)
81.99 SGD
ADD TO CART
Collet Diameter (phimm): 6.0(1/4), Compatible Air Pressure: recommended 6.3 (90 psig), Exhaust System: Rear exhaust-, Air Inlet: NPT1/4, Air Consumption (m2/min): 0.24, Dimensions (Width x Length) (mm): 65x152, Hose Inner-Diameter (phi mm): More than 6.5, No Load Rotation Speed (min-1[r.p.m]): 25000, Weight (g): 360, Specification: Safety lever system
Category Pneumatic Tools > Grinder > Micro Grinder
Flux Chipper
FUJI INDUSTRIAL TECHNIQUE
3.75(4)
199.99 - 319.99 SGD
Hose Mouthpiece Mounting Screw: PT1/4, Stroke (mm): 16 (piston)
Category Pneumatic Tools > Peeling Tools > Air Chipper
Micro Air Grinder
TRUSCO
5.00(1)
259.99 SGD
ADD TO CART
Air Consumption (m3/min): 0.15, Working Pressure (MPa): 0.4 to 0.6, Chuck Bore (phi mm): 3, No Load Rotation Speed (min-1[r.p.m]): 60000, Weight (g): 108, Overall Length (mm): 155, TRUSCO Part Number: 301-9128, Specification: Hose inlet/One touch P plug, exhaust method/backward
Category Pneumatic Tools > Grinder > Micro Grinder
Micro Angle Grinder
UHT
409.99 SGD
ADD TO CART
Hose Connection Diameter: PT 1/4, Shank Axis: 3mm, Exhaust System: Backwards, Air Consumption (NL/min): 120, Supply Air Pressure (MPa): 0.6, Body Weight (g): 140, Switching Method: Grip control valve, Maximum Rotation Speed (min-1[r. p.m]): 52500, Type: 120 degree angle type, Height (mm): 78, Overall Length (mm): 107, Application: For precise grinding and polishing job
Category Pneumatic Tools > Grinder > Angle Grinders
Grinder
URYU SEISAKU
259.99 SGD
ADD TO CART
Noise Level (dB(A)): 85, Recommended Hose Diameter (mm): 9.5, Hose Mouthpiece Mounting Screw: PT1/4, Length from Shaft to Side (mm): About 17.0, Collet Chuck Dimensions (mm): 6, Air Consumption (m3/min): About 0.4 (air pressure 0.6MPa at the time of no load), No Load Rotation Speed (min-1[r.p.m]): 25000 (highest), Weight (kg): About 0.54 (with no whetstone), Overall Length (mm): About 164 (with no whetstone), TRUSCO Part Number: 211-6006, Specification: Collet chuck: Zipper CP for 6-mm shaft (with chuck nut)
Category Pneumatic Tools > Grinder > Straight Grinder
Micro Air Grinder
Super Tool
5.00(1)
309.99 - 409.99 SGD
Exhaust System: Backward, Supply Air Pressure (MPa): 0.6
Category Pneumatic Tools > Grinder > Micro Grinder
Coil Nailer
MAX
3.00(1)
559.99 SGD
ADD TO CART
Use Hose: Up to 30 m in length and 7 mm inner diameter, Dimensions (Height x Width x Length) (mm): 284 x 108 x 312, Air Pressure (MPa[kgf/cm2]): 0.39 to 0.78 (approx. 4-8), Nail length (mm): 32, 38, 45, 50, Safety Equipment: Mechanical system, trigger lock, Weight (kg): 1.6, Specification: No need to switch "Continuous" and "Single Shot". Trigger Lock, Wire exclusive use, 360 degree air exhaustion, Hook, Case, Accessories: Protective glasses Jet oiler (oil-filled) 4mm Hexagonal-bars spanner, Application: Foundation
Category Pneumatic Tools > Nailing
Pneumatic Nipper
MUROMOTO TEKKO
5.00(3)
249.99 - 409.99 SGD
Caution: Blades are not included. Please purchase the blade according to the applications
Category Pneumatic Tools > Cutting and Bending > Air Nippers
Micro Air Grinder GEM NEW MOTOR
Gem
5.00(1)
369.99 SGD
ADD TO CART
Purpose: Metal precise finishing. After-treatment of the deburring, molding, grinding, sculpture and internal processing of metal. Cutting work and grinding processing of lumber, stone and plastic etc. After the welding surface finish., Air Consumption (L/minANR): 160, Supply Air Pressure (MPa): 0.5(+0.2/-0.1), Throttle System: ON-OFF VALVE, Chucking Ability (mm): phi3, Maximum Rotation Speed (min-1[r. p.m]): 60000, Weight (g): 100, Overall Length (mm): 137 (Without hose), Accessories: Collet (phi 3) / 1 piece Air hose phi5.8 (inner diameter) x phi8.5 (outer diameter) x 1.5 m (length)/1 piece Exhaust hose 0.5m (length) 1 piece Box spanner, (6mm)/1 piece Grip wrench, (8 mm)/1 piece Mule, sleep (phi 20 mm)/1 piece Tool box/1 piece
Category Pneumatic Tools > Grinder > Micro Grinder
Air Hammer
ANEST IWATA CAMPBELL
4.50(2)
90.99 SGD
ADD TO CART
Size (mm): (Hammer bit)0.401 parker taper, Number of Blows (min-1 [times/min]): 3500, Maximum Working Pressure (MPa): 0.59, Air Consumption (L/min): 310, Body Dimensions (Length x Width x Height) (mm): 170x51x165, Weight (kg): 1.36
Category Pneumatic Tools > Peeling Tools > Air Hammer
Ratchet Wrench
SP AIR
4.33(3)
259.99 SGD
ADD TO CART
Capability Bolt Diameter: 12mm, Air Outlet: PT1/4, Air Consumption (L/min): 45, Maximum Torque (N m): 61, Revolution (min-1[r.p.m]): 250, Plug Angle (mm): 12.7, Weight (kg): 1.2, Overall Length (mm): 254, Accessories: Coupler (20PM)
Category Pneumatic Tools > Tightening and Drilling > Ratchet wrench
Air Impact Wrench
TONE (Maeda Metal Industries)
4.60(5)
319.99 SGD
ADD TO CART
Purpose: For automobile tyre replacement. For general work bolt removal For bolt removal in construction work, Adaptive Bolt Size: M16, Air Intake: PT1/4, Body Dimensions (Width x Depth x Height) (mm): 166.5x60x170, Air Hose Inside Diameter (phi mm): 10, Working Pressure (MPa): 0.62, Air Consumption (L/min): 127.5 (Max.), Square Drive (mm): 12.7 (With a pin hole), Body Weight (kg): 1.2 (Except for socket and coupler), No Load Rotation Speed (min-1[r.p.m]): 10000, Maximum Torque (N m): 470, TRUSCO Part Number: 390-4288
Category Pneumatic Tools > Tightening and Drilling > Impact Wrenches
Coil Spring
ANEST IWATA CAMPBELL
4.33(3)
17.99 SGD
ADD TO CART
Compatible: TL9534 TL9003
Category Pneumatic Tools > Pneumatic Tools Accessories > Turning tool > Parts
Cushion pad
Compact Tool
3.86(7)
13.99 SGD
ADD TO CART
Dimension (mm): 123, Thickness (mm): 10, TRUSCO Part Number: 391-3511, Compatible: (Pad) 28869DMA, 28869LA, Specification: Cushion pad
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Pads
Electric Belt Sander, Baby Belton
NITTO KOHKI
719.99 SGD
Working Pressure (MPa [kgf/cm2]): 0.59[6], No Load Rotation Speed (min-1[r.p.m]): 16000, Specification: Pneumatic light polishing belt sander
Category Pneumatic Tools > Polishing > Belt Sander
Duct Hose
Compact Tool
3.00(1)
30.99 SGD
ADD TO CART
Hose Length (mm): 1250, Dimension (mm): -, TRUSCO Part Number: 366-3914
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Maintenance Supplies
Air Nipper Blade, Standard S Type
MUROMOTO TEKKO
5.00(1)
55.99 - 109.99 SGD
Edge Type: Standard blade
Category Pneumatic Tools > Pneumatic Tools Accessories > Cutting/bending > Replacement Blades
Sand Blaster Gun
ESCO
1.75(4)
129.99 SGD
ADD TO CART
Suction Port Size: 1/4inchPT, Indispensability Compressor (kw): 2.2, Air Consumption (L/min): 150, Working Pressure (MPa): 0.6 to 0.8, Capability: 1L (side tanks), Weight (kg): 1.2, Overall Length (mm): 300, Dimension (mm): 200(H)x300(L), ESCO Part Number: EA127B, Compatible: 120 (Sand) - 24 granularity, Accessories: Four sand (1kg), nozzle, collection bag, Application: Rust removal, paint peeling
Category Pneumatic Tools > Polishing > Blast Polishing
Belt Sander
SP AIR
4.50(2)
399.99 SGD
ADD TO CART
Purpose: Finishing polish of various types of mold, beats cutting after welding, etc., Hose Mounting Nozzle: 1/4"NPT, Belt Speed (m/min): 2580, Air Consumption (L/min): 120, Belt Width W x Length l (mm): 20x520, Maximum Speed (min-1[r. p.m]): 17000, Weight (kg): 1.4, Overall Length (mm): 245, Accessories: L-TYPE WRENCH, BODY MOUNTED BELT PAPER (# 60 )
Category Pneumatic Tools > Polishing > Belt Sander
1/2" Air Ratchet Wrench
TRUSCO
4.50(2)
209.99 SGD
ADD TO CART
Hose Mounting Nozzle: Rc1/4, Ability Bolt Diameter (mm): 10, Rolling Speed of No-load (min-1[r.p.m]): 160, Air Pressure: 0.62, Air Consumption (m3/min): 0.3, Working Pressure (MPa): 0.62, Maximum Torque (N m): 30, Plug Angle (mm): 12.7, Weight (kg): 1.22, Overall Length (mm): 227, TRUSCO Part Number: 288-0032, Specification: No socket locking mechanism
Category Pneumatic Tools > Tightening and Drilling > Ratchet wrench
Air Angle Grinder
YANASE
5.00(1)
269.99 SGD
ADD TO CART
Exhaust Direction: Side, Size (mm): (Disk) phi58x10, Air Consumption (m3/min): 0.6, Working Pressure (MPa): 0.44 - 0.58, Revolution (min-1[r.p.m]): 22000, Weight (g): 530, Overall Length (mm): 140, Accessories: TOP minidisk #40, #60, #120 1 each regulator, coupler, replacement wrench, Allen wrench, each one
Category Pneumatic Tools > Grinder > Angle Grinders
Cutting Wheel
MASTER AIR
4.62(8)
20.99 - 22.99 SGD
Thickness (mm): 1
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Polishing Paper
Air Ratchet Wrench
ANEST IWATA CAMPBELL
3.67(3)
109.99 - 219.99 SGD
Purpose: Removing and tightening of bolts and nuts in small spaces., Socket Plug Insertion Angle (mm): 9.5
Category Pneumatic Tools > Tightening and Drilling > Ratchet wrench
Mini Angle Grinder
CUSTOR
5.00(2)
119.99 SGD
ADD TO CART
Collet Diameter (phimm): 6.0(1/4), Compatible Air Pressure: recommended 6.3 (90 psig), Exhaust System: Rear exhaust-, Air Inlet: NPT1/4, Air Consumption (m2/min): 0.24, Outer Dimensions (Length L x Width W x Height H) (mm): 155x65x75, Hose Inner-Diameter (phi mm): More than 6.5, No Load Rotation Speed (min-1[r.p.m]): 22000, Weight (g): 540, Specification: Safety lever system
Category Pneumatic Tools > Grinder > Angle Grinders
Roller Minico
OFFICE MINE
799.99 SGD
ADD TO CART
Purpose: Metal polishing process: Hair line metal finish of stainless steel, mirror finishing of stainless steel, deburring of die castings and casting, Civil engineering polishing: peel-off coating. cleaning polish (or other abrasive) civil engineering polish,, Belt Dimensions (mm): 60x260, Whell Number Rotation Speed (min-1[r.p.m]): 7000, Air Consumption (m3/min): 0.30, Roller (W x phi mm): 60x50, External Dimensions (Width (W)x Depth (D)x Height (H)) (mm): 100x170x115, Weight (kg): 1.25, TRUSCO Part Number: 138-8142, Specification: Pneumatic, Accessories: POLISHING GUIDES, ABRASIVE BELT (Z80, WA180), HL BELT COARSE, HEXAGON WRENCHES, COUPLER, AIR REGULATOR AND OIL INSERTION
Category Pneumatic Tools > Polishing > Belt Sander
NPK Air-Powered Chipping Hammer
Nippon Pneumatic Mfg
419.99 - 869.99 SGD
Category Pneumatic Tools > Peeling Tools > Air Chipper
Needle Scaler Pistol Type
FUJI INDUSTRIAL TECHNIQUE
429.99 - 459.99 SGD
Needle Length (mm): 180, Weight (kg): 2.5, Overall Length (mm): 371
Category Pneumatic Tools > Peeling Tools > Air Needle Scalers
Needle Scaler Straight
FUJI INDUSTRIAL TECHNIQUE
379.99 - 389.99 SGD
Needle Length (mm): 180, Weight (kg): 1.9, Overall Length (mm): 325
Category Pneumatic Tools > Peeling Tools > Air Needle Scalers
SP-1370 1370A Belt Sander Idle Pulley Set
SP AIR
31.99 SGD
ADD TO CART
Compatible: SP-1370, SP-1370A
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Parts, Tools
Micro Angle Grinder
UHT
4.00(1)
409.99 - 419.99 SGD
Hose Connection Diameter: PT 1/4, Air Consumption (NL/min): 120, Supply Air Pressure (MPa): 0.6, Switching Method: Grip control valve, Application: For smoothness grinding and polishing work
Category Pneumatic Tools > Grinder > Angle Grinders
Sand Blaster Gun
ESCO
95.99 SGD
ADD TO CART
Suction Port Size: 1/4inchPT, Indispensability Compressor (kw): 0.75 or more, Nozzle Diameter (phi mm): 4, Air Consumption (L/min): 140, Working Pressure (MPa): 0.64, Capability: 1kg (side tanks), Weight (g): 600, Dimension (mm): 175(H)x210(L), ESCO Part Number: EA127BB, Compatible: 180 (Sand) - 16 granularity
Category Pneumatic Tools > Polishing > Blast Polishing
Cup Grinding Wheels, For 093.123
UHT
4.00(1)
64.99 SGD
Purpose: For grinding, Mounting Dimensions: M7xP0.75, Grinding Wheel Diameter (phi mm): 30
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Grinding stone
New Soft Lap, For 093-123
UHT
5.00(1)
41.99 - 45.99 SGD
Purpose: For polishing, Diameter (phi mm): 30, Specification: Contains 1 rubber pad
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Grinding stone
Belt Sander Belton Parts
NITTO KOHKI
4.00(5)
41.99 SGD
ADD TO CART
Part Number: 20581, Compatible: B20N/EBS20
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Parts, Tools
Air Impact Wrench Parts
GREAT TOOL
4.40(5)
0.99 SGD
Compatible Body: GTAW-52 for
Category Pneumatic Tools > Pneumatic Tools Accessories > Tightening and Drilling
Idle pulley B Assy
NITTO KOHKI
5.00(2)
55.99 SGD
ADD TO CART
Compatible Models: B-20NB, B-20C, EBS-20B, EB-20A, TRUSCO Part Number: 276-1246
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Parts, Tools
Staple Gun
UNITED
149.99 SGD
Driving Speed (sec): About six or more, Valve Mechanism: Head valve system, Operating Air Pressure (MPa[kgf/cm2]): 0.39 - 0.68[4 - 7], Height x Length x Width (mm): 174x250x55, Hose Inner-Diameter (phi mm): 6(1/4NPT), Weight (kg): 1.2
Category Pneumatic Tools > Nailing
Sand Blast Sand
ESCO
4.50(2)
48.99 SGD
ADD TO CART
Grain Size: 60, Material: Aluminum-based, ESCO Part Number: EA127B-15, Compatible: EA127B, BB, BK for
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Maintenance Supplies
3/8" Air Ratchet Wrench
ESCO
179.99 SGD
Suction Port Size: 1/4inchPT
Category Pneumatic Tools > Tightening and Drilling > Ratchet wrench
Idle Pulley 10 Sub Assy
NITTO KOHKI
33.99 SGD
ADD TO CART
Compatible: BB-10
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Parts, Tools
Double Action Sanding Machine
ThreeM 3M
4.80(5)
409.99 SGD
ADD TO CART
Purpose: Automotive plastic parts foundation treatment. Vehicles, boats, construction equipment foundation treatment, etc. Baking finish repair., Orbit Diamond(mm): 5, Paper Dimension (mm): 125, Pad Dimension (mm): 125, Air Consumption (L/min): 481, Maximum Rotation Speed (min-1[r. p.m]): 12000 (at the time of no-load), Type: Suction dust type, Weight (kg): 0.83, Overall Length (mm): 155.4, Material: Case: Resin Frame: Metal, TRUSCO Part Number: 336-1187, Specification: Rotation Type : Double Action, Accessories: Clean sanding disk-pads PN20353 (outside diameter: 125 mm), wrench, lubricating oil, filter bag PN20452 for dust collecting (only suction dust type is attached), Application: Automotive plastic parts foundation treatment. Vehicles, boats, construction equipment foundation treatmen...
Category Pneumatic Tools > Polishing > Sander and Polisher
Belt Sander
SP AIR
349.99 SGD
ADD TO CART
Caution: Recommended to use compressors of 3 or more horse power, Purpose: Color stripping , deburring, removing rust, polishing etc. in narrow places, Screw Size: PT1/4, Belt Speed (m/min): 1100, Belt Width W x Length l (mm): 10x330, 12x330, Maximum Speed (min-1[r. p.m]): 16000, Weight (kg): 0.8, Overall Length (mm): 275, Accessories: Coupler (PT1/4), belts (10 x 330 mm # 60) x 1
Category Pneumatic Tools > Polishing > Belt Sander
Jet Chisel
NITTO KOHKI
5.00(1)
649.99 SGD
ADD TO CART
Piston Diameter (phi mm): 16, Needle Diameter , Quantity: phi2 X 29, Standard Length of Needle (mm): 150, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.15, Number of no-load Blows -1: 4000, Main Part Dimension (mm): 158x150, Weight (kg): 1.4, Type: Pneumatic high speed multi needle chisel, TRUSCO Part Number: 116-6000, Specification: Light weight type, Accessories: Needle phi2x 150 mm x 58 pieces (29 mounted on inner main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece
Category Pneumatic Tools > Peeling Tools > Air Chisels
Air Hammer, Hexal Shaft
ANEST IWATA CAMPBELL
4.17(6)
57.99 - 139.99 SGD
Hexagon Opposite Side(mm): 10
Category Pneumatic Tools > Peeling Tools > Air Hammer
Air Impact Wrench, 1/2
U-TOOLS (SAITAMA SEIKI)
199.99 SGD
ADD TO CART
Purpose: For removing and installing nuts and bolts of wheels of passenger cars and light trucks and for machinery maintenance., Ability Bolt Diameter (mm): 16, Air Consumption (L/min): No load time: 480, load time: 350, No Load Rotation Speed (min-1[r.p.m]): 7000, Maximum Torque (N m): 450, Shank Length (mm): 26, Plug Angle (mm): 12.7, Size: MOUTHPIECE: 1 / 4 PT, Height (mm): 185, Weight (kg): 2.4, Overall Length (mm): 187
Category Pneumatic Tools > Tightening and Drilling > Impact Wrenches
Air Ratchet 9.5sq
SP AIR
3.00(1)
139.99 SGD
ADD TO CART
Ability Bolt Diameter (mm): 10, Number of Revolutions: 270 revolutions per minute, Maximum Torque (N m): 20, Plug Angle (mm): 9.5, Type: Mini type, Weight (kg): 0.5, Overall Length (mm): 165
Category Pneumatic Tools > Tightening and Drilling > Ratchet wrench
Chisel for A-302 Flat Chisel Bar 1002
NITTO KOHKI
5.00(1)
33.99 SGD
ADD TO CART
Shank Diameter (phi mm): 10, Blade Length (mm): 25, Overall Length (mm): 180, TRUSCO Part Number: 276-8755
Category Pneumatic Tools > Pneumatic Tools Accessories > Turning tool > Tip Tool
Belt Sander Roller
OFFICE MINE
62.99 - 119.99 SGD
Compatible Models: RMB-1, RMB-E, SRM-E, HMB-E
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Parts, Tools
12.7sq Drive Medium Impact Wrench
KUKEN
4.88(8)
279.99 SGD
ADD TO CART
Purpose: Light car and passenger vehicle tire removal work U bolt removal work Assembly / disassembly engine and suspension, etc., Compressor: 2.2kw, Use Air Hose's Inner Diameter (mm): 6.5, Ability Bolt Diameter (mm): 18, Operating Torque Range (N/m): 100 - 450, Noise Level (dB(A)): 91, Hose Mouthpiece Mounting Screw: Rc1/4, Rolling Speed of No-load (min-1[r.p.m]): 6000, Outlet Size (mm): 12.7, Air Consumption (m3/min): 0.4, Weight (kg): 2.4 (without socket), Overall Length (mm): 178, TRUSCO Part Number: 295-4338, Accessories: COUPLING PLUG 20PM
Category Pneumatic Tools > Tightening and Drilling > Impact Wrenches
Micro Air Grinder, Mach Motor,
Gem
359.99 SGD
ADD TO CART
Purpose: Metal precise finishing. After-treatment of the deburring, molding, grinding, sculpture and internal processing of metal. Cutting work and grinding processing of lumber, stone and plastic etc. After the welding surface finish., Exhaust System: Back, Hose Connection Port (air source side): R1/4, Air Consumption (L/minANR): 180, Supply Air Pressure (MPa): 0.5(+0.2/-0.1), Throttle System: ON-OFF VALVE, Chucking Ability (mm): phi3, Maximum Rotation Speed (min-1[r. p.m]): 60000, Weight (g): 140, Overall Length (mm): 144, Accessories: air hose diameter phi5.8 (inner diameter) x phi8.5 mm (outer diameter) x 1.5 m (length) / 1 piece Exhaust hose / 1 piece Pintor (phi3 mm) / 1 piece Open ended wrench (for 8 mm for) / 1 piece
Category Pneumatic Tools > Grinder > Micro Grinder
Air Chipper
NITTO KOHKI
5.00(1)
319.99 SGD
Working Pressure (MPa [kgf/cm2]): 0.59[6]
Category Pneumatic Tools > Peeling Tools > Air Chipper
Automatic Chisel
NITTO KOHKI
579.99 SGD
ADD TO CART
Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.3, Number of no-load Blows -1: 2600, Weight (kg): 1.7, Overall Length (mm): 185 (A-300 Main body), Type: High-speed pneumatic chisel, TRUSCO Part Number: 116-6981, Accessories: Flat chisel: 1002 x 1 piece Moil point chisel: 1024 x 1 piece Air hose Assy (with coupler 30PH) x 1 piece Coupler: 200-30SHx1 piece
Category Pneumatic Tools > Peeling Tools > Air Chisel
Flux Chipper
YOKOTA INDUSTRIAL
3.00(1)
179.99 - 219.99 SGD
Purpose: Chipping work of stonework, woodwork, and aluminum., 2014 TRUSCO Published Page: 2-1588, No-load Blows Number (min-1): 12000, Hose Mounting Nozzle: Rc1/4, Working Pressure (MPa): 0.4 to 0.6
Category Pneumatic Tools > Peeling Tools > Air Chipper
Air Ratchet Wrench
KUKEN
5.00(5)
179.99 SGD
ADD TO CART
Caution: Noise level : air pressure 0.6 MPa (Pe) no load data., Purpose: Small screw work 10mm or less. Overhaul work of automobile oil pan, water pump, air conditioning, etc. Disassembly in the automotive plating work, Compressor (Kw): 1.5, Use Air Hose's Inner Diameter (mm): 6.5, Air Consumption (Nm3/min): 0.25, Ability Bolt Diameter (mm): 10, Noise Level (dB(A)): 83, Hose Mouthpiece Mounting Screw: Rc1/4, Rolling Speed of No-load (min-1[r.p.m]): 300, Maximum Torque (N m): 20, Plug Angle (mm): 9.5, Weight (kg): 0.5 (Without socket), Overall Length (mm): 170 (Without socket), Accessories: Coupler plugs
Category Pneumatic Tools > Tightening and Drilling > Ratchet wrench
FCH-20F and FCH-25 Type Chisel
FUJI INDUSTRIAL TECHNIQUE
5.00(1)
18.99 - 31.99 SGD
Edge Type: Flat bend type, Compatible Models: FCH-20F FCH-25
Category Pneumatic Tools > Pneumatic Tools Accessories > Turning tool > Tip Tool
DR Air Ratchet
ESCO
2.00(1)
149.99 SGD
ADD TO CART
Suction Port Size: 1/4inchPT, Outlet Corner (inch): 41641, Indispensability Compressor (kw): 0.75 to 2.2, Air Consumption (L/min): 115, Bolt Diameter: 13mm, No Load Rotation Speed (min-1[r.p.m]): 160, Maximum Torque (N m): 67.6, Working Pressure (MPa): 0.64, Weight (kg): 1.15, Overall Length (mm): 365, ESCO Part Number: EA157PB, Accessories: Case, the socket (9 10 11 13 14 17 19mm), extract tension (75mm), (+) No.2 3 (-) 5.5 driver bit
Category Pneumatic Tools > Tightening and Drilling > Ratchet wrench
Grinder
URYU SEISAKU
5.00(1)
269.99 SGD
ADD TO CART
Noise Level (dB(A)): 85, Recommended Hose Diameter (mm): 9.5, Hose Mouthpiece Mounting Screw: PT1/4, Length from Shaft to Side (mm): About 17.0, Collet Chuck Dimensions (mm): 6, Air Consumption (m3/min): About 0.4 (air pressure 0.6MPa at the time of no load), No Load Rotation Speed (min-1[r.p.m]): 25000 (highest), Weight (kg): About 0.56 (with no whetstone), Overall Length (mm): About 174 (with no whetstone), TRUSCO Part Number: 211-6014, Specification: Collet chuck: Zipper CP for 6-mm shaft (with chuck nut)
Category Pneumatic Tools > Grinder > Straight Grinder
Jet Chisel, Air-Operated High Speed Multi Needle Chisel
NITTO KOHKI
799.99 SGD
ADD TO CART
Piston Diameter (phi mm): 20, Needle Diameter , Quantity: phi2x29, phi3x12, Standard Length of Needle (mm): 180, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.2, Number of no-load Blows -1: 4000, Weight (kg): 2.75, Overall Length (mm): 244 (Main body), TRUSCO Part Number: 116-6034, Specification: Low vibration type, Accessories: Needle phi3x 180 mm x 24 pieces (12 mounted on inner main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece
Category Pneumatic Tools > Peeling Tools > Air Chisels
Air Impact Wrench
GREAT TOOL
2.33(3)
139.99 SGD
ADD TO CART
Caution: Use 0.61MPa(6.3kgf/cm2)or less air compression.Use in higher pressures will cause accidents or damage of the product. Empty rotation with the socket still on will cause breakdown. Pulling the trigger will create impact, hold firmly with both , Operating Air Pressure (MPa[kgf/cm2]): 0.61(6.3), Air Outlet: PT male/PT / female 6.35 mm (1 / 4-inch), Hose Inside-Diameter (phi mm): More than 6.5, Body Weight (kg): 2.1, Air Consumption (L/min): 126, No Load Rotation Speed (min-1[r.p.m]): 6800, Maximum Torque (N m): 407, Plug-in Angle (mm [inch]): 12.7(1/2), Overall Length (mm): 187 (Main body), Set Contents: Air impact wrench body / accent make one touch plug (PT1/4 male)-long light socket (17 / 19.21 mm)-Hand wrench seal
Category Pneumatic Tools > Tightening and Drilling > Impact Wrenches
Orbital Sander
Compact Tool
459.99 - 469.99 SGD
Purpose: Polishing of metal, putty, and other woodworking products (finish) work., Pad Size (mm): 73x98, Orbit Diamond(mm): 3, Air Pressure: 5, Flow Rate (L/min): 260, Air Outlet: PT1/4, Noise Level (dB): 88, Revolution (min-1[r.p.m]): 9000, Dimension (mm): W73xH71xL145
Category Pneumatic Tools > Polishing > Orbital Sander
Air Ratchet Wrench
Ingersoll
4.00(1)
149.99 SGD
ADD TO CART
NPT: (Air inlet diameter) 4-inch, Outlet Corner (sq.): 9.5 (3/8), Compatible Hose Diameter (phi mm): 10, Air Consumption (L/min): 85, No Load Rotation Speed (min-1[r.p.m]): 250, Overall Length L (mm): 186, Maximum Torque (N m): 34, Weight (kg): 0.6
Category Pneumatic Tools > Tightening and Drilling > Ratchet wrench
Palm Orbital Sander
NITTO KOHKI
5.00(1)
539.99 SGD
ADD TO CART
Purpose: Flatten scratch of plating work, repair deep scar caused by sanding work, putty work, etc., Paper Diameter (mm): 125, Orbit Diameter (mm): 5, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.42, No Load Rotation Speed (min-1[r.p.m]): 11000, Weight (kg): 0.73, Type: Pneumatic grinding machine, TRUSCO Part Number: 116-7120
Category Pneumatic Tools > Polishing > Orbital Sander
Medium Impact Wrench
KUKEN
5.00(1)
419.99 SGD
ADD TO CART
Caution: Noise level : air pressure 0.6 MPa (Pe) no load data., Purpose: Light car and passenger vehicle tire removal work U bolt removal work Assembly / disassembly engine and suspension, etc., Compressor (Kw): 2.2, Use Air Hose's Inner Diameter (mm): 6.5, Air Consumption (Nm3/min): 0.35, Ability Bolt Diameter (mm): 16, Operating Torque Range (N/m): 90 - 350, Noise Level (dB(A)): 84, Hose Mouthpiece Mounting Screw: Rc1/4, Rolling Speed of No-load (min-1[r.p.m]): 6300, Plug Angle (mm): 12.7, Weight (kg): 2.8 (Without socket), Overall Length (mm): 198 (Without socket), TRUSCO Part Number: 295-4290
Category Pneumatic Tools > Tightening and Drilling > Impact Wrenches
Pneumatic Mini Beveler
NITTO KOHKI
989.99 SGD
ADD TO CART
2014 TRUSCO Published Page: 2-1597, Chamfer Angle: 15 - 45 degree, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.9, Chamfering Capability: (SS400) up to 7C, 2R, 3R, 4R maximum 3C, 2R, 3R, 4R mild steel: Stainless steel (SUS304), No Load Rotation Speed (min-1[r.p.m]): 14000, Weight (kg): 2.9, TRUSCO Part Number: 116-6492, Accessories: Hexagon wrench T-15Gx1 this:: wrench (one inside the body attached) x2 pieces chip set screw (one inside the body attached) x2 12.7 square hole perforated sheet: Chip 3mm, 4mmx each :200-30SHx1 pieces x2 book coupler 8x25 Special: M8x2 pieces hexagon socket head set screw: one hex nut one
Category Pneumatic Tools > Metal Processing
Air Micro Grinder
NITTO KOHKI
409.99 SGD
ADD TO CART
2014 TRUSCO Published Page: 2-1542, Chuck Diameter (mm phi): 3, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.17, No Load Rotation Speed (min-1[r.p.m]): 56500, Weight (kg): 0.25, Overall Length (mm): 128.5, Type: Pneumatic micro grinder, TRUSCO Part Number: 116-6191, Specification: Wiht rotation speed adjuster, Accessories: Wheel grinder: 5x13x3mmx1 this spanner: 7x9mmx2 this coupler: HA-65SNx1 pieces
Category Pneumatic Tools > Grinder > Micro Grinder
Hope Sander
Solar
3.00(1)
289.99 SGD
ADD TO CART
Pad Size (phi mm): 125 Magic Type, Orbit Diameter (mm): 5, Air Pressure: 5 - 6, Air Outlet: R1/4, Air Consumption (m3/min): 0.34, Revolution (min-1[r.p.m]): 10000, Type: Dust collection bag, Weight (kg): 0.9, Overall Length (mm): 173 (When mounted on the coupler), Accessories: One-touch coupler plug, a spanner, putt, a hose, dust collection bag, air tool oil
Category Pneumatic Tools > Polishing > Sander and Polisher
Air Belt Sander
KUKEN
399.99 SGD
ADD TO CART
Purpose: Grinding work of spot and beat section in welding. Chamfering, deburring, and rust removal of metals surface such as iron and aluminum. Grinding operation of woodworking products., Using Compressor: 2.2kW, Use Air Hose's Inner Diameter (mm): 6.5, Noise Level (dB(A)): 85, Rolling Speed of No-load (min-1[r.p.m]): 18000, Air Consumption (m3/min): 0.45, Belt Speed (m/min): 1200, Paper Dimension (mm): 10x330, Overall Width (mm): 85, Weight (kg): 0.9, Overall Length (mm): 330
Category Pneumatic Tools > Polishing > Belt Sander
Air Nibbler
ESCO
139.99 SGD
ADD TO CART
Suction Port Size: 1/4inchPT, Number of Strokes (min-1 [Time/minute]): 3500, Indispensability Compressor (kw): 1.5, Air Consumption (L/min): 280, Blade Width (mm): 4, Cutting Capability (mm): Steel: 1.4, aluminum: 1.0, Working Pressure (MPa): 0.62, Screw Pilot Hole Size (mm): phi21, Weight (kg): 1.1, Overall Length (mm): 170, ESCO Part Number: EA166A
Category Pneumatic Tools > Cutting and Bending > Air Nibbler
Air Chisel
ESCO
4.67(3)
129.99 SGD
ADD TO CART
Suction Port Size: 1/4inchPT, Indispensability Compressor (kw): 1.5, Air Consumption (L/min): 157, Case Dimension (mm): 320x250x95, Blows (min-1 [times/minute]): 3000, Working Pressure (MPa): 0.64, Weight (kg): 1.6, Overall Length (mm): 210, Stroke (mm): 66, ESCO Part Number: EA159SA
Category Pneumatic Tools > Peeling Tools > Air Chisel
Impact Air Screwdriver
VESSEL
469.99 SGD
ADD TO CART
Purpose: Screw clamping of down direction. Work in assembly line., 2014 TRUSCO Published Page: 2-1529, Hose Coupling: G1/4, Bit Plug Part (mm): 6.35, Maximum Tightening Torque (N m): 10.3, Air Consumption (m3/min): 0.2, Working Pressure (MPa): 0.6, No Load Rotation Speed (min-1[r.p.m]): 9000, Capability: 4.0-5.0 (usually a screw) 3.5 to 4.0 (tapping screws) 2.7 to 3.5 (wood screws) 4.0 to 5.0 (volts), Weight (g): 830, Weight (kg): 0.83, Overall Length (mm): 187, Shape: Straight, TRUSCO Part Number: 125-4375, Accessories: Bit (+) 2x65G, fittings BPN-2F
Category Pneumatic Tools > Tightening and Drilling > Impact Drivers
Jet Chisel, Air-Operated High Speed Multi Needle Chisel
NITTO KOHKI
1,029.99 SGD
ADD TO CART
Piston Diameter (phi mm): 24, Needle Diameter , Quantity: phi2x53, phi3x23, Standard Length of Needle (mm): 180, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.3, Number of no-load Blows -1: 4000, Weight (kg): 2.7, Overall Length (mm): 237 (Main body), Description 2: Hard steel wire needle that reciprocates at very high speed, 3700 to 6000 times per minute. Lightweight-strong type, optional lineup that meets needs., TRUSCO Part Number: 116-6042, Specification: General-purpose type, Accessories: Needle phi3x 180 mm x 46 pieces (23 mounted on inner main unit) Needle phi2x180mmx106 pieces Needle supporter phi2x1 piece Hexagonal rod spanner 6mm x 1 piece Air hose Assy (with coupler 30PH) x1 piece Coupler 200-30SHx1 piece
Category Pneumatic Tools > Peeling Tools > Air Chisels
Jet Chisel, Air-Operated High Speed Multi Needle Chisel
NITTO KOHKI
729.99 SGD
ADD TO CART
Piston Diameter (phi mm): 20, Needle Diameter , Quantity: phi2x29, phi3x12, Standard Length of Needle (mm): 180, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.2, Number of no-load Blows -1: 4000, Weight (kg): 2.4, Overall Length (mm): 245 (Main body), TRUSCO Part Number: 116-6026, Specification: General-purpose type, Accessories: Needle phi3x 180 mm x 24 pieces (12 mounted on inner main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece
Category Pneumatic Tools > Peeling Tools > Air Chisels
Chisel Spring
NITTO KOHKI
3.00(1)
14.99 SGD
ADD TO CART
Compatible: For A-302
Category Pneumatic Tools > Pneumatic Tools Accessories > Turning tool > Parts
Air Impact Wrench
SP AIR
4.33(3)
309.99 SGD
ADD TO CART
Purpose: Bolt removal work of general maintenance work, such as automobiles, airplanes miniature. Ideal for work in narrow and deep places, Hose Mounting Nozzle: NPT1/4, Ability Bolt Diameter (mm): 10, Socket Plug Insertion Angle (mm): 9.5, Exhaust System: Handle, Maximum Tightening Torque (N m): 7 - 68, Air Consumption (m3/min): 0.4, Working Pressure (MPa): 0.62, No Load Rotation Speed (min-1[r.p.m]): 17000, Weight (kg): 0.68, Overall Length (mm): 110, TRUSCO Part Number: 336-6014, Specification: Double hammer
Category Pneumatic Tools > Tightening and Drilling > Impact Wrenches
Air Saw Replacement Blade, For Osaka Soul 02015
No Brand
4.00(3)
37.99 - 38.99 SGD
Compatible: Air saw 02015
Category Pneumatic Tools > Pneumatic Tools Accessories > Cutting/bending > Replacement Blades
Air Impact Wrench Strong Type
GREAT TOOL
249.99 SGD
ADD TO CART
Caution: Use 0.61MPa(6.3kgf/cm2)or less air compression.Use in higher pressures will cause accidents or damage of the product. Empty rotation with the socket still on will cause breakdown. Pulling the trigger will create impact, hold firmly with both , Operating Air Pressure (MPa[kgf/cm2]): 0.61(6.3), Air Outlet: PT male/PT / female 6.35 mm (1 / 4-inch), Hose Inside-Diameter (phi mm): More than 6.5, Body Weight (kg): 2.19, Air Consumption (L/min): 128, No Load Rotation Speed (min-1[r.p.m]): 6800, Maximum Torque (N m): 542, Plug-in Angle (mm [inch]): 12.7(1/2), Overall Length (mm): 180 (Main body), Set Contents: Air impact wrench body / accent make one touch plug (PT1/4 male)-long light socket (17 / 19.21 mm)-Hand wrench seal
Category Pneumatic Tools > Tightening and Drilling > Impact Wrenches
Air Belt Sander Ceramic Endless Belt
VESSEL
4.00(2)
64.99 SGD
Belt Dimensions (mm): 12x330, Compatible Models: GT-BS12
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Polishing Belt
Air Riveter
JTC
549.99 SGD
ADD TO CART
Air Pressure: 6 to 8, Rivet Diameter: Range of Use(phi mm): 2.4,3.2,4.0,4.8,6.0,6.4, Height (mm): 240, Weight (kg): 1.85, Width (mm): (Not including cap) 165, Specification: With zipper Attractive force : 1600kg/f, Accessories: Nose piece, Joe case, Joe, Joe pusher, hex wrench, bolt plug, spanner, coupler plug
Category Pneumatic Tools > Air Riveter
Pad, No Hole
Compact Tool
5.00(2)
45.99 - 48.99 SGD
Dimension (mm): 123, Compatible Models: 914L, 905A4
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Pads
The Needle for Jet Chisels
NITTO KOHKI
5.00(2)
76.99 - 279.99 SGD
Category Pneumatic Tools > Pneumatic Tools Accessories > Turning tool > Tip Tool
Jet Chisel
NITTO KOHKI
539.99 SGD
ADD TO CART
Needle Diameter , Quantity: phi2x7, phi3x3, Standard Length of Needle (mm): 180, Working Pressure (MPa [kgf/cm2]): 0.59[6], Air Consumption (m3/min): 0.07, Number of no-load Blows -1: 6000, Weight (kg): 0.98, Overall Length (mm): 190 (Main body), Type: Pneumatic high speed multi needle chisel, TRUSCO Part Number: 116-6018, Specification: Compact and light weight type, Accessories: Needle phi3x 180 mm x 3 pieces (mounted on main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece
Category Pneumatic Tools > Peeling Tools > Air Chisels
Chisel Guide
NITTO KOHKI
82.99 SGD
ADD TO CART
Compatible: A-302 for
Category Pneumatic Tools > Pneumatic Tools Accessories > Turning tool > Parts
Middle Size Impact Wrench
KUKEN
5.00(1)
809.99 SGD
ADD TO CART
Compressor (Kw): 3.75, Use Air Hose's Inner Diameter (mm): 9.5, Air Consumption (Nm3/min): 0.47, Ability Bolt Diameter (mm): 22, Operating Torque Range (N/m): 200 to 800, Noise Level (dB(A)): 88, Hose Mouthpiece Mounting Screw: Rc3/8, Rolling Speed of No-load (min-1[r.p.m]): 4300, Plug Angle (mm): 19, Weight (kg): (Not including socket) 4, Overall Length (mm): (Not including socket) 216, TRUSCO Part Number: 295-4397
Category Pneumatic Tools > Tightening and Drilling > Impact Wrenches
Scraper
NITTO KOHKI
40.99 - 64.99 SGD
Purpose: Remove rust and painting from sheet iron, Compatible Body: A-302
Category Pneumatic Tools > Pneumatic Tools Accessories > Turning tool > Tip Tool
Air Riveter
LOBTEX
4.00(3)
799.99 SGD
ADD TO CART
Caution: Make sure to use it attaching to tank unit. Wear protective glasses while use. Read instruction manual and understand it well before use.Use air pressure range should be 0.49-0.59MPa(5-6kgf/cm2). Over air pressure cause accident and injury. To refuel hydraulic oil, remove flame head., 2014 TRUSCO Published Page: 1-2235, Operating Noise (dB): (Value basis by the manufacturer) 69.5, Air Pressure (MPa[kgf/cm2]): 0.49 to 0.59[5 to 6], Tensile Strength (kN [kgf]): (Vacuum) ON / 9.0 [918], OFF / 10.0 [1020], Compatible Rivet (phi mm): 2.4, 3.2, 4.0, 4.8, Air Consumption (L/min): 68 (when air pressure 0.49MPa), Weight (g): 1090, Stroke (mm): 19, TRUSCO Part Number: 406-7452, Specification: Air control/air-valve type, shock-less function, air filler port/right and left(changeable, vertica...
Category Pneumatic Tools > Air Riveter
Sponge Buff Phi125
YANASE
4.67(3)
19.99 - 20.99 SGD
2014 TRUSCO Published Page: 2-1575
Category Pneumatic Tools > Pneumatic Tools Accessories > Polishing, Grinding > Buffs

1 2 3 4 5 6 7 8 9 10 ...19 Next